Menu
EUR

Deutz-Fahr Agrotron TTV 610 tractor parts & technical data

More than 200 parts fit the Deutz-Fahr Agrotron TTV 610 from the Agrotron TTV series. Think of trailer couplings, lighting and electrics, among others.

222 parts found for Deutz-Fahr Agrotron TTV 610
Show:
Feed pump Deutz-Fahr Agrotron, Hürlimann XL, Same Fortis, Audax
5%
Feed pump Deutz-Fahr Agrotron, Hürlimann XL, Same Fortis, Audax
€222,47 €183,86 €211,30 €174,63
 
Seal Ø 18 x 2,5 mm
Seal Ø 18 x 2,5 mm
Ø: 18 x 2,5 mm.
€22,60 €18,68
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
5%
GRANIT
Repair set polyurethane beglazingskit, Terostat primer - 310 ml
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper...
€55,61 €45,96 €52,80 €43,64
 
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
18%
Walterscheid
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
 
HELLA Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x 127 x 97 m...
€57,00 €47,11
 
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensio...
€37,00 €30,58
 
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
5%
Sauermann
Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
Bosch/Rexroth Hydraulic pump 45 cm³ clockwise, 43,5 kg
10%
Bosch/Rexroth
Hydraulic pump 45 cm³ clockwise, 43,5 kg
Output volume (cc/rev): 45 | Direction of rotation: Right
€4.257,86 €3.518,89 €3.852,30 €3.183,72
 
Scharmüller Drawbar frame 59,7 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Drawbar frame 59,7 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Guide width (mm): 32 | D-value (kN): 59,7 | Version: Prepared for drawbar | Load...
€1.034,55 €855,00
 
GRAMMER Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
5%
GRAMMER
Seat contact switches IHC, New Holland, Deutz 125 mm, 4-pin
Sitzoberteil: 721, 722, 731, 741 | Seat contact switch CASE / NEW HOLLAND / DEUT...
€101,91 €84,22 €96,80 €80,00
 
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
66%
FEBI
Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
 
GRANIT V-belt air conditioning
GRANIT
V-belt air conditioning
€19,90 €16,45
 
Stop solenoid switch Deutz-Fahr
5%
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
 
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
Pressure pipe Fendt, SAME, Hürlimann, Deutz-Fahr, Lamborghini
€112,68 €93,12 €107,00 €88,43
 
GRANIT Hydraulic top link cat. 3, 640 - 910 mm, stroke 270 mm, Ø 90 mm
5%
GRANIT
Hydraulic top link cat. 3, 640 - 910 mm, stroke 270 mm, Ø 90 mm
A cat.: 3 / 32. B cat.: 3 / 32. F: 640 / 910 mm. Piston rod Ø D: 45 mm. Cylinder...
€687,79 €568,42 €653,40 €540,00
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
18%
Walterscheid
Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
GRANIT Sensor sensor - engine speed, connection cable with plug Agrotron
5%
GRANIT
Sensor sensor - engine speed, connection cable with plug Agrotron
Version: Sensor - engine speed, Connection cable with plug.
€141,29 €116,77 €134,20 €110,91
 
GRANIT Sensor waterniveau fuel pre-filter
5%
GRANIT
Sensor waterniveau fuel pre-filter
Version: Fuel pre-filter - water level indicator.
€371,86 €307,32 €353,25 €291,94
 
Showing 49 - 72 of 222

Deutz-Fahr Agrotron TTV 610 parts for cab, hitch and engine

A tractor like the Agrotron TTV 610 earns its keep through long working days, and the wear shows up in predictable places: the seat you spend hours in, the lights you rely on after dark and the drawbar that takes every trailer. This page brings together more than 200 replacement parts that fit this model, from GRANIT, HELLA, Sauermann, GRAMMER and PROBOSS.

Engine sealing and cooling

Under the bonnet you will find seals, O-rings and valve cover gaskets, together with injection lines, starter motors and a fan clutch. There is also a seal for the hydraulic pump. A weeping valve cover looks like a minor issue, yet the oil collects dust and hides any other leak you might want to spot early. Clean the sealing face properly before the new gasket goes on.

Cab comfort

For the cab there are tractor seats such as an air suspended GRAMMER Maximo Dynamic and a PROBOSS seat with a seat heater. Gas struts, for example for the roof window, sit alongside aircon compressors for when the cab no longer cools down in summer. Work lamps, including a flood beam version, let you renew or add to the roof lighting.

A workshop tip for gas struts: fit the new strut with the piston rod facing down where possible. That keeps the internal seal wetted with oil, so the strut holds its pressure for longer.

Hitching up

The rear of the TTV 610 rarely gets a day off. Automatic drawbars, Piton Fix parts and air hoses are all available here. A drawbar with play in the locking mechanism makes coupling awkward and is a hazard on the road, so check the locking pin and guide at every service and replace them once you see wear marks.

Getting the right part first time

Start with the type plate on your tractor to confirm it really is an Agrotron TTV 610. If the old part is already off, look for its reference number. On a starter motor or aircon compressor this is usually on a label or stamped into the housing. Match it against the product details and you can be sure the connections and mounting points line up.

Running another Agrotron TTV from the same range as well? Each of these models has its own page listing the parts that fit it:

For every other model from the brand, head to the overview of all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart