Menu
EUR

Deutz-Fahr Agrotron TTV 610 tractor parts & technical data

More than 200 parts fit the Deutz-Fahr Agrotron TTV 610 from the Agrotron TTV series. Think of trailer couplings, lighting and electrics, among others.

222 parts found for Deutz-Fahr Agrotron TTV 610
Show:
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 135 mm. Total height: 222 mm. Connection: Socket pipe. Protection clas... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€139,80 €115,54
Scharmüller Automatic hitch adjustable, rail 270 mm, pin 38 mm, 82,4 kN
Scharmüller
Colour: Kubota grey | D-value (kN): 82,4 | Load capacity (kg): 2000 | Plate height (mm): 120 | Rail width (mm): 270 | Description: Height adjustable w... More
Colour: Kubota grey | D-value (kN): 82,4 | Load capacity (kg): 2000 | ...
€1.128,50 €932,64
Scharmüller Piton Fix inserts 2000 kg, rail 270 mm, working length 154 mm, Kubota gray
Scharmüller
Plate height (mm): 120 | Lock: Piton Fix | Overhang (mm): 154 | Colour: Kubota grey | Hole (mm): M20 | D-value (kN): 89,3 | Guide width (mm): 32 | Rai... More
Plate height (mm): 120 | Lock: Piton Fix | Overhang (mm): 154 | Colour...
€1.083,40 €895,37
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
GRANIT Oil cooler height 60 mm
GRANIT
Height: 60 mm. More
Height: 60 mm.
€344,51 €284,72 €327,25 €270,45
You save 5%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€315,25 €260,54 €299,45 €247,48
You save 5%
GRANIT Bleed valve Fendt, Deutz-Fahr
€241,85 €199,88 €229,75 €189,88
You save 5%
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT Seal Ø 11,5 x 3 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€14,20 €11,74
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.442,00 €2.844,63
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
Scharmüller Drawbar automatic, rail 330 mm, pin Ø 25 mm, 2500 kg, AGCO gray
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.396,49 €1.154,12 €1.235,00 €1.020,66
You save 12%
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
You save 10%
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
Scharmüller Automatic hitch adjustable, rail 270 mm, pin 31 mm, 82,4 kN
Scharmüller
Colour: Kubota grey | Additional information: Automatic pin coupling CH-I (31 mm) | Description: Height adjustable with handle | Rail width (mm): 270 ... More
Colour: Kubota grey | Additional information: Automatic pin coupling C...
€1.128,50 €932,64
Scharmüller Ball insert Ball 80 height adjustable, rail 270 mm, 2000 kg
Scharmüller
Lock: ball 80 | Hole (mm): M20 | D-value (kN): 89,3 | Detent pin Ø (mm): 25 | Load capacity (kg): 2000 | Description: Height adjustable with handle |... More
Lock: ball 80 | Hole (mm): M20 | D-value (kN): 89,3 | Detent pin Ø (m...
€1.322,75 €1.093,18
Showing 73 - 96 of 222

Deutz-Fahr Agrotron TTV 610 parts for cab, hitch and engine

A tractor like the Agrotron TTV 610 earns its keep through long working days, and the wear shows up in predictable places: the seat you spend hours in, the lights you rely on after dark and the drawbar that takes every trailer. This page brings together more than 200 replacement parts that fit this model, from GRANIT, HELLA, Sauermann, GRAMMER and PROBOSS.

Engine sealing and cooling

Under the bonnet you will find seals, O-rings and valve cover gaskets, together with injection lines, starter motors and a fan clutch. There is also a seal for the hydraulic pump. A weeping valve cover looks like a minor issue, yet the oil collects dust and hides any other leak you might want to spot early. Clean the sealing face properly before the new gasket goes on.

Cab comfort

For the cab there are tractor seats such as an air suspended GRAMMER Maximo Dynamic and a PROBOSS seat with a seat heater. Gas struts, for example for the roof window, sit alongside aircon compressors for when the cab no longer cools down in summer. Work lamps, including a flood beam version, let you renew or add to the roof lighting.

A workshop tip for gas struts: fit the new strut with the piston rod facing down where possible. That keeps the internal seal wetted with oil, so the strut holds its pressure for longer.

Hitching up

The rear of the TTV 610 rarely gets a day off. Automatic drawbars, Piton Fix parts and air hoses are all available here. A drawbar with play in the locking mechanism makes coupling awkward and is a hazard on the road, so check the locking pin and guide at every service and replace them once you see wear marks.

Getting the right part first time

Start with the type plate on your tractor to confirm it really is an Agrotron TTV 610. If the old part is already off, look for its reference number. On a starter motor or aircon compressor this is usually on a label or stamped into the housing. Match it against the product details and you can be sure the connections and mounting points line up.

Running another Agrotron TTV from the same range as well? Each of these models has its own page listing the parts that fit it:

For every other model from the brand, head to the overview of all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart