Menu
EUR

Deutz-Fahr Agrotron TTV 630 tractor parts & technical data

The Deutz-Fahr Agrotron TTV 630 has its own page here with more than 200 matching parts, including trailer couplings, lighting and electrics.

226 parts found for Deutz-Fahr Agrotron TTV 630
Show:
Seal Ø 27 x 2,5 mm Fendt, SAME, Deutz-Fahr, Lamborghini
€21,25 €17,56
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.442,00 €2.844,63
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
Sensor kit rail pressure Hürlimann, Deutz-Fahr, Lamborghini
Version: Rail pressure. More
Version: Rail pressure.
€331,01 €273,56 €299,45 €247,48
You save 10%
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic. Material thickness: 5 mm. Fixing: Vertical. Installation location: R... More
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Materia...
€2,86 €2,36
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 132 mm, 2 grooves
SANDEN
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Reference no.: 8227 | Nominal voltage (V): 12 | For compressor: SD7H15 | Fixing: EM ... More
Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP - 10 | Refe...
€485,61 €401,33 €461,30 €381,24
You save 5%
GRANIT Alternator 14 V / 200 A, flange 2 x 56 mm
GRANIT
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tension hole Ø / R (mm): 10,5 / 90,0 | Form: B | Mounting hole Ø / R (mm): 10,5 / ... More
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tens...
€281,37 €232,54 €267,30 €220,91
You save 5%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
You save 5%
GRANIT Wheel brake cylinder Deutz-Fahr Agrotron 230-260, Lamborghini
€810,24 €669,62 €769,70 €636,12
You save 5%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
You save 5%
GRANIT Connecting rod bearing Ø 70 mm
Injector Hürlimann, Lamborghini, Same
€639,18 €528,25 €607,20 €501,82
You save 5%
GRANIT Feed pump Lamborghini Mach 200 ST - 250 VRT, R6.100-R6.190
€64,52 €53,32 €61,25 €50,62
You save 5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
Cover fender
€18,15 €15,00
Showing 97 - 120 of 226

Agrotron TTV 630 parts from hitch to cab

The Deutz-Fahr Agrotron TTV 630 is a working tractor, and the parts that wear on it reflect that. This page lists more than 200 items that fit this type, from the hitch at the back to the seat in the cab.

Hitch and drawbar parts

For the rear end there are drawbars, drawbar frames, top drawbars, adapter plates and Piton Fix inserts, with Scharmüller and Walterscheid among the brands. They let you replace a worn hitch or convert to a different coupling system.

Before ordering an adapter plate or drawbar, measure the rail width and the bolt hole pattern of the plate that is fitted now, and check the pin diameter of the lock. Those three details decide whether a new part slots into the existing rail. The plate on the tractor and any number stamped on the old part settle the remaining doubts.

Engine, injection and air conditioning

On the engine side you will find a starter motor, an aircon compressor, a valve cover gasket, injection lines, injection O-rings and seals, for example for the hydraulic pump. These are the parts you reach for when the engine is slow to start or starts weeping oil.

A tip if you change an injection line yourself: cap every open connection straight away. A single grain of dirt in the injection system can upset an injector, and that is not a quick fix afterwards. Run the union nuts on by hand first so the line sits without tension, then tighten them. Swap the O-rings at the same time, since a ring that has been compressed once rarely seals well again.

Cab and lighting

Inside, tractor seats from GRAMMER and PROBOSS seats keep long days bearable, and gas struts hold the door, rear window or bonnet open. Work lamps from HELLA and GRANIT light up the field when the days get short.

When a gas strut no longer holds the bonnet or rear window, replace them as a pair. If one has given up, the other is rarely far behind, and two new struts keep the panel straight. Fit them rod down where you can, so the seal inside stays lubricated and the strut lasts longer.

Other Agrotron TTV tractors

If you run another Agrotron TTV as well, or want to check you are on the right page, these types have their own pages:

Every other model from the brand is collected under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart