Web Analytics
Deutz-Fahr AgroXtra 4.17 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr AgroXtra 4.17

Looking for parts for your Deutz-Fahr AgroXtra 4.17 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

273 parts found for Deutz-Fahr AgroXtra 4.17
Show:
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €41,78 €34,53
You save 25%
HELLA Reflector red 180 x 40 mm, thickness 6,5 mm, Ø 5,2 mm, hole spacing 150 mm
HELLA
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height: 40 mm. Hole spacing: 150 mm. Material: Plastic. Material thickness: 6,5 mm. Fi... More
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height...
€3,57 €2,95 €3,50 €2,89
You save 2%
GRANIT Brake pad set 71 x 19 x 90 mm, drive shaft, Knott brake caliper
GRANIT
To fit as: Deutz DX 3.10, 3.30, 3.50, 3.60, 3.65, 4.70, AgroPrima 4.31, 4.51, 4.56, AgroXtra 3.57, 4.07, 4.17, 4.47, 4.57 More
To fit as: Deutz DX 3.10, 3.30, 3.50, 3.60, 3.65, 4.70, AgroPrima 4.31...
€21,57 €17,83 €19,52 €16,13
You save 10%
GRANIT Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€518,86 €428,81 €425,52 €351,67
You save 18%
Repair set brake cylinder DOT4 without piston Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€60,11 €49,68 €58,91 €48,69
You save 2%
GRANIT Brake disc drive shaft 224 x 13 mm, 6-hole Deutz-Fahr
GRANIT
Menke no.: 68295. More
Menke no.: 68295.
€213,18 €176,18 €202,52 €167,37
You save 5%
Walterscheid Ball hitch flange ball 80, 140 x 80 mm, 82,4 kN, M17, black
Walterscheid
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Description: The dim... More
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-va...
€1.669,80 €1.380,00 €1.419,33 €1.173,00
You save 15%
GRANIT Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
GRANIT
Version: Set of parts. More
Version: Set of parts.
€15,34 €12,68 €15,03 €12,42
You save 2%
GRANIT Sealing nut cooling fan Fendt, Deutz-Fahr
€7,41 €6,12 €7,26 €6,00
You save 2%
GRANIT V-belt Deutz-Fahr AgroPrima, AgroStar, AgroXtra, Massey Ferguson
€16,25 €13,43 €15,93 €13,17
You save 2%
GRANIT Seal 80 x 3 mm Fendt, Deutz-Fahr
GRANIT
Dimensions: 80 x 3 mm. More
Dimensions: 80 x 3 mm.
€11,66 €9,64 €11,43 €9,45
You save 2%
GRANIT Cylinder head Deutz-Fahr
GRANIT
Engine types: BFL913, BFL913T. More
Engine types: BFL913, BFL913T.
€283,89 €234,62 €269,70 €222,89
You save 5%
GRANIT Shock absorber 280 mm, stroke 95 mm, cylinder Ø 22 mm Deutz-Fahr
GRANIT
Stroke: 95 mm. Length: 280 mm. Cylinder Ø: 22 mm. Piston rod Ø: 8 mm. More
Stroke: 95 mm. Length: 280 mm. Cylinder Ø: 22 mm. Piston rod Ø: 8 mm
€75,87 €62,70 €74,35 €61,45
You save 2%
GRANIT Thrust washer for thickness 1,3 mm Fendt, Deutz-Fahr
GRANIT
Engine types: FL812, FL912. Dimensions: 5. More
Engine types: FL812, FL912. Dimensions: 5.
€12,44 €10,28 €12,19 €10,07
You save 2%
GRANIT Push rod tube 220 mm Deutz-Fahr
GRANIT
Engine types: FL912, FL913, FL812. Length: 220 mm. More
Engine types: FL912, FL913, FL812. Length: 220 mm.
€20,33 €16,80 €19,92 €16,46
You save 2%
GRANIT Valve seat ring inlet valve Fendt, Deutz-Fahr
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€34,09 €28,17 €33,41 €27,61
You save 2%
GRANIT Bolt set 2de steering valve M10 x 150 Deutz-Fahr
GRANIT
Technical data: M10 x 150. More
Technical data: M10 x 150.
€20,22 €16,71 €19,82 €16,38
You save 2%
GRANIT Steering valve ew/dw with float position 220 bar, 60 l/min, system SD80
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€711,79 €588,26 €605,02 €500,02
You save 15%
GRANIT Ball pin steel M8, wrench size 22, E 13 mm Deutz-Fahr
GRANIT
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€14,34 €11,85 €14,05 €11,61
You save 2%
GRANIT Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
GRANIT
Dimensions: 84 x 88 x 1.5 mm. More
Dimensions: 84 x 88 x 1.5 mm.
€26,56 €21,95 €26,03 €21,51
You save 2%
GRANIT Wiper motor without switch 12 V, angle 105°, M12 x 1
GRANIT
Volts: 12. W: konisch 8 x M6 mm. Angle: 105 °. A: 65 mm. B: 43 mm. C: 9 mm. D: M12 x 1 mm. E: 20 mm. F: M5 mm. G: 30 mm. Wiper blade length max.: 750... More
Volts: 12. W: konisch 8 x M6 mm. Angle: 105 °. A: 65 mm. B: 43 mm. C:...
€201,78 €166,76 €191,69 €158,42
You save 5%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.075,69 €889,00 €910,37 €752,37
You save 15%
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
GRANIT
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€36,36 €30,05 €35,63 €29,45
You save 2%
Showing 73 - 96 of 273

Parts for your Deutz-Fahr AgroXtra 4.17 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroXtra 4.17. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroXtra 4.17. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroXtra 4.17. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart