Web Analytics
Deutz D4506 oldtimer tractor parts - Techniek Totaal
Menu
EUR

Deutz D4506 oldtimer tractor parts

Do you need quality parts for your Deutz D 4506 oldtimer tractor? In this category you will find all parts that fit this oldtimer tractor.

272 Products
Show:
GRANIT Gasket
GRANIT
Gasket
Description: 1x installed.
€28,99 €23,96
 
GRANIT Compensating ring 1.55 mm for liner top
GRANIT
Compensating ring 1.55 mm for liner top
€9,39 €7,76
 
GRANIT Compensating ring 1.5 mm for liner top
GRANIT
Compensating ring 1.5 mm for liner top
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€9,89 €8,17
 
GRANIT Compensating ring 1.4 mm for liner top
GRANIT
Compensating ring 1.4 mm for liner top
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,4 mm.
€11,59 €9,58
 
GRANIT Compensating ring 1.35 mm for liner top
GRANIT
Compensating ring 1.35 mm for liner top
€9,39 €7,76
 
GRANIT Compensating ring 1.3 mm for liner top
GRANIT
Compensating ring 1.3 mm for liner top
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,3 mm.
€9,39 €7,76
 
GRANIT Compensating ring 3 mm for liner top
GRANIT
Compensating ring 3 mm for liner top
€12,69 €10,49
 
GRANIT Compensating ring 1.1 mm for liner top
GRANIT
Compensating ring 1.1 mm for liner top
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,...
€3,59 €2,97
 
GRANIT Shim 0.5 mm For liner, bottom, inner Ø: 111 mm, thickness: 0.5 mm
GRANIT
Shim 0.5 mm For liner, bottom, inner Ø: 111 mm, thickness: 0.5 mm
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm.
€2,69 €2,22
 
GRANIT Bolt set
GRANIT
Bolt set
Technical data: consisting of: 1 x M8 x 140, 2 x M8 x 130, for 2nd Control unit.
€24,79 €20,49
 
GRANIT Bolt set for 2nd control unit
GRANIT
Bolt set for 2nd control unit
Technical data: 3x M8 x 140. Menke no.: 51681.
€26,19 €21,64
 
GRANIT Bolt set for 1st control unit
GRANIT
Bolt set for 1st control unit
Technical data: 3x M8 x 90.
€13,59 €11,23
 
Bosch/Rexroth Single pump anticlockwise
15%
Bosch/Rexroth
Single pump anticlockwise
Output volume: 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€359,54 €297,14 €305,69 €252,64
 
GRANIT Inner ring left, for lifting shaft
GRANIT
Inner ring left, for lifting shaft
Dimensions: 75 x 88.6 x 1 mm.
€45,79 €37,84
 
GRANIT Guard ring left, for lifting shaft
GRANIT
Guard ring left, for lifting shaft
Dimensions: 90 x 75 x 10 mm.
€30,99 €25,61
 
GRANIT Bush right, for lifting shaft
7%
GRANIT
Bush right, for lifting shaft
Dimensions: 74 x 80 x 85 mm.
€165,65 €136,90 €154,09 €127,35
 
GRANIT Sealing ring for piston
GRANIT
Sealing ring for piston
Dimensions: 84 x 88 x 1.5 mm.
€25,59 €21,15
 
GRANIT Lifting rod for lower link lifting rod top part right
7%
GRANIT
Lifting rod for lower link lifting rod top part right
Dimensions: Length = 370, Thread = M22 x 2 mm.
€202,43 €167,30 €188,29 €155,61
 
Scharmüller Scharmüller flange hitch
15%
Scharmüller
Scharmüller flange hitch
Lock: Manual pin. Hole pattern: 140 x 80 mm. Load capacity: 2500 kg. D-value: 82...
€429,66 €355,09 €365,29 €301,89
 
Scharmüller Flange hitch CH-I with remote control capability for third-party manufacturers
15%
Scharmüller
Flange hitch CH-I with remote control capability for third-party manufacturers
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value...
€1.033,07 €853,78 €878,19 €725,78
 
GRANIT Drive shaft Length: 1800 mm
5%
GRANIT
Drive shaft Length: 1800 mm
Version: Thread: 2 x M18 x 1.5.
€73,57 €60,80 €69,89 €57,76
 
GRANIT Gasket
GRANIT
Gasket
To fit as: Deutz D 4005, 4505, 4006, 5006, 5206
€27,29 €22,55
 
GRANIT Brake lining 60 x 7 x 380 mm 16 holes
GRANIT
Brake lining 60 x 7 x 380 mm 16 holes
€28,99 €23,96
 
GRANIT Brake lining 60 x 7 x 283 mm 12 holes
GRANIT
Brake lining 60 x 7 x 283 mm 12 holes
€25,79 €21,31
 
Showing 217 - 240 of 272

Deutz D4506 oldtimer tractor parts

For the Deutz D4506 oldtimer tractor, you'll find a wide range of tractor parts in our shop. From engine and fuel system components to various metal parts – we’ve got it all. Popular parts include the seat, engine hood, steering wheel, fenders, headlights, taillights, and more. The parts from other models in the Deutz 06 oldtimer series are largely compatible. All parts for this model can be easily found and ordered in our webshop.

Technical specs Deutz D4506

The Deutz D 4506 is part of the popular Deutz 06 series. The 4506 was built between 1974 and 1981 and is equipped with a 3.1-liter air-cooled F3L912 diesel engine. This F3L912 engine delivers approximately 45 hp. The original color is typically Deutz green (Paint RAL 6018) with grey accents.

Still looking for parts for your Deutz D4506 oldtimer tractor? Order them easily through the Techniek Totaal webshop. Use our categories or search by part number to quickly find the right item. Any questions or can’t find what you’re looking for? Feel free to contact our customer service.

Brands
  • View more
Connecting pin
Hole pattern (mm)
Hole Ø
Manual-Automatic
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart