Web Analytics
Deutz-Fahr D 5207 tractor parts - Techniek Totaal
Menu
EUR

Up to 20% spring discount!

Get up to 20% discount now on all parts, consumables, tools and fasteners.

Tractor parts Deutz-Fahr D 5207

Looking for parts for your Deutz-Fahr D 5207 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

176 Products
Show:
GRANIT Bolt set
-10%
GRANIT
Bolt set
Technical data: consisting of: 1 x M8 x 90, 2 x M8 x 80, for 1st Control unit.
€13,39 €11,07 €12,10 €10,00
 
GRANIT Gasket set for auxiliary control unit 85219010 flange surface
-10%
GRANIT
Gasket set for auxiliary control unit 85219010 flange surface
Menke no.: 51722.
€31,06 €25,67 €28,09 €23,21
 
GRANIT End plate For SD60 economical This end plate is necessary to close a valve section with the control valve
-10%
GRANIT
End plate For SD60 economical This end plate is necessary to close a valve section with the control valve
Technical data: Max. operating pressure: 250 bar, Nominal flow rate: max. 50 l/m...
€174,11 €143,89 €157,45 €130,12
 
GRANIT Gasket thickness 0.2 mm
-9%
GRANIT
Gasket thickness 0.2 mm
€0,70 €0,58 €0,64 €0,53
 
GRANIT Single pump
-10%
GRANIT
Single pump
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,...
€250,04 €206,64 €226,11 €186,87
 
GRAMMER Maximo Professional Deutz V1 MSG95AL/731
-18%
GRAMMER
Maximo Professional Deutz V1 MSG95AL/731
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€3.054,45 €2.524,34 €2.506,14 €2.071,19
 
PROBOSS PROBOSS AS3520 Deutz V2
-20%
PROBOSS
PROBOSS AS3520 Deutz V2
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€2.222,05 €1.836,41 €1.770,23 €1.463,00
 
GRANIT Sender spring for control hydraulics standard
-10%
GRANIT
Sender spring for control hydraulics standard
€162,00 €133,88 €146,49 €121,07
 
GRANIT O-ring for oil dipstick
-10%
GRANIT
O-ring for oil dipstick
Dimensions: 30 x 3.5 mm.
€11,91 €9,84 €10,77 €8,90
 
GRANIT Bush left, for lifting shaft
-10%
GRANIT
Bush left, for lifting shaft
Dimensions: 71 x 80 x 85 mm.
€139,65 €115,41 €126,28 €104,36
 
GRANIT Bush right, for lifting shaft
-10%
GRANIT
Bush right, for lifting shaft
Dimensions: 74 x 80 x 85 mm.
€156,76 €129,55 €141,75 €117,15
 
GRANIT Sealing ring left, for lifting shaft
-10%
GRANIT
Sealing ring left, for lifting shaft
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€40,27 €33,28 €36,42 €30,10
 
HELLA Oil pressure switch For engine, break contact
-15%
HELLA
Oil pressure switch For engine, break contact
Version: Thread: M10 x 1 tapered, Switching pressure: 0.15-0.45 bar, Blade termi...
€14,89 €12,31 €12,71 €10,50
 
GRANIT Steering column switch
-10%
GRANIT
Steering column switch
Version: Mounting, functions: indicators, horn, dipped beam/full beam changeover...
€62,01 €51,25 €56,08 €46,35
 
GRANIT Replacement key Set, 2 off
-10%
GRANIT
Replacement key Set, 2 off
Locking number: 14610. Version: Locking no. 14610.
€10,31 €8,52 €9,32 €7,70
 
GRANIT Ignition switch With 2 keys
-10%
GRANIT
Ignition switch With 2 keys
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 m...
€35,11 €29,02 €31,75 €26,24
 
GRANIT Intermediate piece rear
-10%
GRANIT
Intermediate piece rear
€34,84 €28,79 €31,51 €26,04
 
HELLA Relay Working current (make contact)
-15%
HELLA
Relay Working current (make contact)
Version: • With resistor for suppressing inductive interference voltage peaks. C...
€17,58 €14,53 €15,01 €12,41
 
GRANIT Pre-filter Ø 76.5 mm
-10%
GRANIT
Pre-filter Ø 76.5 mm
€144,70 €119,59 €130,85 €108,14
 
GRANIT Return spring brake pedal right Deutz 3006, 4006, 5206, 6206, 6806, 7206
-10%
GRANIT
Return spring brake pedal right Deutz 3006, 4006, 5206, 6206, 6806, 7206
To fit as: Deutz 3006, 4006, 5206, 6206, 6806, 7206
€14,47 €11,96 €13,08 €10,81
 
GRANIT PTO shaft end piece
-10%
GRANIT
PTO shaft end piece
Version: Length 225 mm. Notes: If the old version with Ø 35 mm is installed, the...
€552,91 €456,95 €499,99 €413,21
 
VICTOR REINZ Crankshaft sealing ring Front, Ø 65 x 85 x 10.5 mm
-10%
VICTOR REINZ
Crankshaft sealing ring Front, Ø 65 x 85 x 10.5 mm
€34,03 €28,12 €30,77 €25,43
 
GRANIT Compensating ring 0.8 mm for liner bottom
-10%
GRANIT
Compensating ring 0.8 mm for liner bottom
€3,87 €3,20 €3,50 €2,89
 
GRANIT Main bearing Standard Ø 70 mm
-10%
GRANIT
Main bearing Standard Ø 70 mm
Engine types: FL812, FL912. Dimensions: 4.
€13,06 €10,79 €11,81 €9,76
 
Showing 145 - 168 of 176

Parts for your Deutz-Fahr D 5207 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr D 5207. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr D 5207. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr D 5207. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart