Menu
EUR

Deutz D 6007 tractor parts & technical data

The right parts keep a Deutz D 6007 from the 07 series running. This page offers more than 200 of them, such as trailer couplings, electrics and lighting.

226 parts found for Deutz-Fahr D 6007
Show:
Exhaust manifold Deutz-Fahr D 4007 - D 7207, D 4507C - D 7807C
€166,39 €137,51 €158,00 €130,58
You save 5%
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812. More
Engine types: FL912, FL913, FL812.
€12,00 €9,92
GRANIT Thrust washer standard Deutz-Fahr
GRANIT Push rod tube 220 mm Deutz-Fahr
GRANIT
Engine types: FL912, FL913, FL812. Length: 220 mm. More
Engine types: FL912, FL913, FL812. Length: 220 mm.
€25,40 €20,99
Valve cover gasket engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
GRANIT Manifold gasket exhaust Fendt, Deutz-Fahr
GRANIT
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€4,69 €3,88
GRANIT Bolt set original end plate 1x M8 x 180, 2x M8 x 170 Deutz-Fahr
GRANIT
Technical data: consisting of: 1x M8 x 180, 2x M8 x 170 . More
Technical data: consisting of: 1x M8 x 180, 2x M8 x 170 .
€37,90 €31,32 €36,00 €29,75
You save 5%
Steering valve dw not blocked 210 bar, 70 l/min, system SD60
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 70 l/min., Operating material: hydraulic oil, Tightening torque: 30 Nm, Conn... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€636,06 €525,67 €604,25 €499,38
You save 5%
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€17,60 €14,55
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€616,19 €509,25 €585,35 €483,76
You save 5%
GRANIT Leaf spring linkage standard Deutz-Fahr
€177,63 €146,80 €168,70 €139,42
You save 5%
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Dimensions: 84 x 88 x 1.5 mm. More
Dimensions: 84 x 88 x 1.5 mm.
€33,20 €27,44
GRANIT Fastening hood Deutz-Fahr Series 07-07C, D 2807-7807C
€58,88 €48,66 €55,90 €46,20
You save 5%
Brake light switch mechanical M14 x 1, break contact, blade terminal 6,3 mm
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6.3 mm. Menke no.: 80803. More
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6...
€35,35 €29,21
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,00 €16,53
HELLA Rear light left Case IH, Deutz-Fahr, Kubota
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, Deutz-Fahr 2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7206,... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€22,55 €18,64 €18,70 €15,45
You save 17%
Hydraulic steering steering wheel, steering column, orbitrol, steering cylinder
To fit as: Deutz 4807, 5207, 5506, 6006, 6007, 6206, 6207, 6507 More
To fit as: Deutz 4807, 5207, 5506, 6006, 6007, 6206, 6207, 6507
€2.765,90 €2.285,87 €2.627,60 €2.171,57
You save 5%
LUK Double clutch 280/280TGU6 36 x 40 mm, 20 splines, 27,40 kg Deutz
LUK
Dimensions (mm): 36 x 40 20 grooves | Flywheel design: Flat More
Dimensions (mm): 36 x 40 20 grooves | Flywheel design: Flat
€876,02 €723,98 €832,20 €687,77
You save 5%
HELLA Alternator 14 V, 33 A Case IH, Deutz-Fahr, John Deere
HELLA
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal voltage (V): 14 | Additional information: Without pulley More
Nominal values (V / A): 14 / 33 | Charging current (A): 33 | Nominal v...
€340,12 €281,09 €273,40 €225,95
You save 20%
GRANIT Track rod trade set 1150 - 1210 mm, taper 18 - 20 mm
GRANIT
A: 1150 - 1210 mm. C: 18 - 20 mm. G: . More
A: 1150 - 1210 mm. C: 18 - 20 mm. G: .
€290,73 €240,27 €276,15 €228,22
You save 5%
GRANIT Track rod 960 mm, M18 x 1,5, taper 14 - 16 mm
GRANIT
A: 970 - 1450 mm. B: M12 x 1,5 mm. C: 14 - 16 mm. G: . D: M12 x 1,5 mm. E: 30 mm. More
A: 970 - 1450 mm. B: M12 x 1,5 mm. C: 14 - 16 mm. G: . D: M12 x 1,5 mm...
€160,13 €132,34 €152,10 €125,70
You save 5%
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Length: 83,5 mm mm. Wire thickness: 2 mm mm. More
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,53 €3,74
Showing 97 - 120 of 226

Deutz D 6007 parts for an engine rebuild, clutch and linkage

Opening up a Deutz D 6007 for an engine rebuild or a new clutch goes smoothly only when every part is ready on the bench. This page lists more than 200 parts for the D 6007, from GRANIT and from brands including HELLA, LUK, Walterscheid and VICTOR REINZ.

Clutch work

For the clutch there are double clutch units and thrust bearings for the driving clutch. A thrust bearing that sings when you press the pedal is best replaced together with the clutch, since the tractor has to be split for either job anyway.

Engine rebuild: rings, seals and shims

For the engine you will find piston ring sets, crankshaft seals, shims for the cylinder liners and exhaust gaskets, enough to sort out an engine that leaks or burns oil in one go.

Check the ring gap on new piston rings first. Push the ring squarely into the bore and measure the gap with a feeler gauge. Then fit the rings to the piston with the gaps staggered so they never line up. The shims under each cylinder liner set how far the liner stands proud of the block. Measure that protrusion and use the same thickness that came out, otherwise the head gasket will not seal properly.

With a new crankshaft seal, look closely at the running surface on the shaft. If the old seal has worn a groove, press the new one in slightly deeper or shallower so the lip runs on clean metal. Oil the lip lightly and drive the seal in squarely, since a seal that sits crooked leaks from day one.

Lift linkage, electrics and smaller parts

For the linkage there are sealing rings for the lift shaft and bushes for the lift arms. A lift arm that visibly rocks on its shaft usually has worn bushes, and the seal next to them has suffered from the play too, so replace both. The D 6007 is also covered with starter motors, alternators, tension springs, bolt sets for the steering valve, lamp lenses, a lockable tank cap with ventilation and a drawbar.

That lockable tank cap earns its place on a tractor parked outside or in an open yard. The vent prevents a vacuum in the tank, and the lock keeps uninvited visitors away from the diesel.

The right part for your Deutz

Write down the serial number from the type plate and also the engine number, which adds certainty for engine parts. The D 6007 belongs to the 07 series from Deutz. Compare the reference number on the old part with the product details, and for piston rings also measure the bore.

From the same series, the Deutz D 6207, Deutz D 6807 and Deutz D 7007 have pages of their own, useful when more than one Deutz lives in the shed. The complete range for the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart