Menu
EUR

Tractor parts Deutz-Fahr DX 3.70

Looking for parts for your Deutz-Fahr DX 3.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

316 parts found for Deutz-Fahr DX 3.70
Show:
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm. More
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,...
€2,71 €2,24
GRANIT Bolt set 3de steering valve M10 x 190 Deutz-Fahr
GRANIT
Technical data: M10 x 190. More
Technical data: M10 x 190.
€35,35 €29,21
Bolt set 2de steering valve M10 x 150 Deutz-Fahr
Technical data: M10 x 150. More
Technical data: M10 x 150.
€25,25 €20,87
Steering valve dw afgedicht 210 bar, 70 l/min, system SD80
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 70 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€759,50 €627,69 €691,40 €571,41
You save 9%
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€402,77 €332,87 €366,65 €303,02
You save 9%
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 206 mm. To ... More
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. ...
€55,59 €45,94 €50,60 €41,82
You save 9%
GRANIT Door lock, right Deutz-Fahr AgroPrima 4.31, DX 7.10
€76,54 €63,26 €69,65 €57,56
You save 9%
GRANIT Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
GRANIT
Dimensions: 75 x 88.6 x 1 mm. More
Dimensions: 75 x 88.6 x 1 mm.
€49,68 €41,06 €45,20 €37,36
You save 9%
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
Dimensions: 85 x 70 x 10 mm. More
Dimensions: 85 x 70 x 10 mm.
€34,72 €28,69 €31,60 €26,12
You save 9%
Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
Dimensions: 84 x 88 x 1.5 mm. More
Dimensions: 84 x 88 x 1.5 mm.
€33,20 €27,44
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm. More
Dimensions: 88 x 3 mm.
€34,60 €28,60
GRANIT Replacement glass curved 248 x 139 mm, unheated
GRANIT
Dimensions: 248 x 139 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 248 x 139 mm. Version: Unheated. Installation location: Ri...
€21,75 €17,98
HELLA Reflector red 180 x 40 mm, thickness 6,5 mm, Ø 5,2 mm, hole spacing 150 mm
HELLA
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height: 40 mm. Hole spacing: 150 mm. Material: Plastic. Material thickness: 6,5 mm. Fi... More
Colour: Red. Hole Ø: 5.2 mm. Width: 180 mm. Form: Rectangular. Height...
€4,46 €3,69
HELLA Glass rear light right, 4 light functions, with red spare lens
HELLA
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10, 4.30, 4.50, 4.70, 6.05, 6.10, 6.30, 6.50, 7.10, DX 3.10SC, 3.30, 3.50, 3.60, 3... More
To fit as: Deutz-Fahr DX 3 V/F/S 3.10, 3.30, 3.50, 3.70, 3.90, DX 4.10...
€18,00 €14,88
SACHS Double clutch DuT 280 Ceram, 36 x 40 mm, 20 splines, sintered
SACHS
Dimensions (mm): 36 x 40 20 grooves | Flywheel design: Flat | Material specifications: Sintered clutch lining More
Dimensions (mm): 36 x 40 20 grooves | Flywheel design: Flat | Material...
€1.187,24 €981,19 €1.080,85 €893,26
You save 9%
Double clutch DuT 310/280 36 x 42 mm, 8 splines MCC
Material specifications: MCC clutch lining | Additional information: Made in Germany | Dimensions (mm): 36 x 42, 8 grooves | web (mm): 79 | Flywheel d... More
Material specifications: MCC clutch lining | Additional information: M...
€1.591,61 €1.315,38 €1.449,00 €1.197,52
You save 9%
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
LUK
Dimensions (mm): 70 x 110 x 20 More
Dimensions (mm): 70 x 110 x 20
€116,29 €96,11 €114,80 €94,88
You save 1%
LUK Clutch plate 280UKF 26 x 32 mm, 10 splines Deutz-Fahr
LUK
Dimensions (mm): 26 x 32 10 grooves More
Dimensions (mm): 26 x 32 10 grooves
€225,24 €186,15 €205,00 €169,42
You save 9%
LUK Clutch plate 280UKF 28 x 32 mm, 17 splines Deutz-Fahr
LUK
Dimensions (mm): 28 x 32 17 grooves More
Dimensions (mm): 28 x 32 17 grooves
€173,47 €143,36 €157,90 €130,50
You save 9%
GRANIT Clutch plate 280, 26 x 32 mm, 10 splines Deutz-Fahr
GRANIT
Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 26 x 32, 10...
€179,76 €148,56 €163,65 €135,25
You save 9%
Double clutch DuT 280 36 x 40 mm, 20 splines Deutz-Fahr
Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat | Material specifications: Sintered clutch lining | Additional information: Made in Germa... More
Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat | Materia...
€655,84 €542,02 €597,00 €493,39
You save 9%
Crank Ø 27 mm, thread M27 x 3 Deutz-Fahr 6807-7807C
Dimensions (mm): Ø = 27. Thread = M27 x 3. More
Dimensions (mm): Ø = 27. Thread = M27 x 3.
€117,05 €96,74 €106,55 €88,06
You save 9%
GRANIT V-belt AV10 x 1550 Deutz-Fahr
GRANIT
Technical data: AV10 x 1550. More
Technical data: AV10 x 1550.
€18,15 €15,00
Piston ring set 3 rings Ø 100 mm, 3 mm trapezoidal ring / 2 mm / 3,5 mm
Dimensions: 3 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2 mm / 3.5 mm. More
Dimensions: 3 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2 mm / 3.5 m...
€42,77 €35,35 €38,90 €32,15
You save 9%
Showing 289 - 312 of 316

Parts for your Deutz-Fahr DX 3.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 3.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 3.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 3.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart