Web Analytics
Deutz-Fahr DX 4.70 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr DX 4.70

Looking for parts for your Deutz-Fahr DX 4.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

298 parts found for Deutz-Fahr DX 4.70
Show:
GRANIT Drive shaft 1860 mm, M18 x 1,5 / M22 x 1,5
GRANIT
Version: Thread: M18 x 1.5 / M22 x 1.5. More
Version: Thread: M18 x 1.5 / M22 x 1.5.
€41,87 €34,60 €41,03 €33,91
You save 2%
GRANIT Push button switch main beam 12/24 V, button blue, Ø 30 mm
GRANIT
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (31- S1- S2- S- +), Dustproof and splashproof, With glass socket bulb ... More
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals ...
€46,65 €38,55 €45,72 €37,79
You save 2%
GRANIT Push button switch four-wheel drive 12/24 V, yellow, 31-S-S1-+
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31 - S - S1 - +), dustproof and splashproof, With glass socket bulb... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€37,75 €31,20 €37,00 €30,58
You save 2%
GRANIT Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
GRANIT
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nominal voltage: 12 / 24 V. Test mark: E20. Light function: Dipped beam, ful... More
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, rig...
€145,81 €120,50 €138,52 €114,48
You save 5%
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€8,53 €7,05 €8,36 €6,91
You save 2%
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€28,53 €23,58 €27,96 €23,11
You save 2%
GRANIT Brake pad set 90 x 15 x 73,8 mm, drive shaft and foot brake
GRANIT
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50 More
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50
€60,94 €50,36 €55,86 €46,17
You save 8%
Garrett Turbocharger exchange part Deutz DX 4.50-4.70, AgroPrima, AgroXtra
Garrett
To fit as: Deutz DX 4.50, 4.70, DX vanaf 8692, AgroPrima 4.51, 4.56, AgroXtra 4.47, 4.57, Hopfen DX 4.57 More
To fit as: Deutz DX 4.50, 4.70, DX vanaf 8692, AgroPrima 4.51, 4.56, A...
€1.947,93 €1.609,86
GRANIT Fuel filter Ø 80 mm, height 160,5 mm, M16 x 1,5
€14,96 €12,36 €14,66 €12,12
You save 2%
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Walterscheid
Description: This product is an automatic trailer hitch. The jaw dimensions and area of application comply with DIN 11028, RREG 2009/144/EC, VO (EU) 2... More
Description: This product is an automatic trailer hitch. The jaw dimen...
€2.086,48 €1.724,36
LUK Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
LUK
Contents: Pressure plate 458231002017, clutch plate 458328011616 More
Contents: Pressure plate 458231002017, clutch plate 458328011616
€1.149,67 €950,14 €1.124,01 €928,93
You save 2%
LUK Double clutch 310/310TGU 41 x 45 mm, 21 splines sintered Deutz-Fahr
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45, 21 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 41 ...
€1.144,30 €945,70 €1.118,75 €924,59
You save 2%
GRANIT Clutch plate 225 PTO shaft, 27 x 30 mm, 16 splines, sintered
GRANIT
Dimensions (mm): 27 x 30, 16 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 27 x 30, 16 grooves | Material specifications: Sinter...
€276,04 €228,13
Bosch/Rexroth Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
Bosch/Rexroth
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 More
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of ...
€553,99 €457,84
Bosch/Rexroth Hydraulic pump 16 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch/Rexroth
Bosch no.: 1517222359 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Bosch no.: 1517222359 | Direction of rotation: Anticlockwise | Output ...
€606,95 €501,61
LUK Clutch plate 280UKF 31 x 36 mm, 16 splines Deutz-Fahr
LUK
Dimensions (mm): 31 x 36 16 grooves More
Dimensions (mm): 31 x 36 16 grooves
€206,78 €170,89 €202,17 €167,08
You save 2%
Repair set clutch cylinder DOT4 ATE version
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€59,53 €49,20
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
€15,12 €12,50 €13,60 €11,24
You save 10%
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Length: 83,5 mm mm. Wire thickness: 2 mm mm. More
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,02 €3,32
GRANIT Repair set foot brake old version ATE Deutz-Fahr
GRANIT
To fit: 71704138. More
To fit: 71704138.
€188,64 €155,90 €179,21 €148,11
You save 5%
GRANIT Fixed caliper, complete ATE bottom right, DOT 4, without brake pads
GRANIT
Description: Suitable brake pad set 71704019. More
Description: Suitable brake pad set 71704019.
€950,45 €785,50 €857,75 €708,88
You save 10%
GRANIT Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
€463,13 €382,75 €393,66 €325,34
You save 15%
GRANIT Oil dipstick 130 mm Deutz-Fahr
GRANIT
Dimensions (mm): Length = 130. More
Dimensions (mm): Length = 130.
€37,45 €30,95 €36,70 €30,33
You save 2%
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
€7,67 €6,34 €7,52 €6,21
You save 2%
Showing 217 - 240 of 298

Parts for your Deutz-Fahr DX 4.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 4.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 4.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 4.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart