Web Analytics
Deutz-Fahr DX 4.70 tractor parts - Techniek Totaal
Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Tractor parts Deutz-Fahr DX 4.70

Looking for parts for your Deutz-Fahr DX 4.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

238 Products
Show:
Walterscheid Inner part
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€948,04 €783,50 €799,04 €660,36
You save 16%
 
 
HELLA Flasher/electronic 12 V, 6 connections
HELLA
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning light function, with cable and bracket. Additional information: • Rel... More
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard...
€74,05 €61,20 €72,79 €60,16
You save 2%
 
 
GRANIT Light lens
GRANIT
To fit as: Deutz-Fahr DX 4.10, 4.30, 4.50, 4, 70, 6.05, 6.10, 6.30, 6.50, 7.10, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4.4... More
To fit as: Deutz-Fahr DX 4.10, 4.30, 4.50, 4, 70, 6.05, 6.10, 6.30, 6....
€26,18 €21,64 €24,71 €20,42
You save 6%
 
 
Repair set
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€50,37 €41,63 €47,53 €39,28
You save 6%
 
 
GRANIT Brake disc 255 x 13 mm, 6 holes, for Cardan shaft
GRANIT
Menke no.: 68296. More
Menke no.: 68296.
€254,83 €210,60 €232,14 €191,85
You save 9%
 
 
GRANIT Brake master cylinder Piston Ø 19 mm, DOT 4
GRANIT
Hole Ø: 19.05 mm. More
Hole Ø: 19.05 mm.
€571,60 €472,40 €481,78 €398,17
You save 16%
 
 
GRANIT Oil dipstick
GRANIT
Dimensions (mm): Length = 130. More
Dimensions (mm): Length = 130.
€34,00 €28,10 €32,09 €26,52
You save 6%
 
 
KS Connecting rod bearing Ø 60 mm, width 25 mm
KS
Dimensions: Ø 60 mm, Width 25 mm. More
Dimensions: Ø 60 mm, Width 25 mm.
€14,28 €11,80 €13,48 €11,14
You save 6%
 
 
GRANIT Shaft sealing ring
GRANIT
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm. More
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm
€39,69 €32,80 €37,45 €30,95
You save 6%
 
 
GRANIT Rubber sleeve
€4,57 €3,78 €4,31 €3,56
You save 6%
 
 
GRANIT Sealing ring Ø 9 x 19 x 2 mm
GRANIT
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,50 €2,07 €2,37 €1,96
You save 5%
 
 
GRANIT Oil filler cap
€7,56 €6,25 €7,76 €6,41
You save -3%
 
 
GRANIT Compensating ring 1.2 mm for liner top
GRANIT
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,2 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,2 mm.
€11,79 €9,74 €11,13 €9,20
You save 6%
 
 
GRANIT Sealing ring for push rod tube
GRANIT
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€2,00 €1,65 €1,89 €1,56
You save 5%
 
 
GRANIT Sealing ring for crankshaft front, Ø 65 x 85 x 13 mm
€20,63 €17,05 €19,47 €16,09
You save 6%
 
 
GRANIT Valve cover convex
GRANIT
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€29,35 €24,26 €27,70 €22,89
You save 6%
 
 
GRANIT Silencer vertical
GRANIT
Version: Length: 1140 mm, Inlet Ø: 74 mm, Outlet Ø: 50.5 mm. To fit: Deutz. More
Version: Length: 1140 mm, Inlet Ø: 74 mm, Outlet Ø: 50.5 mm. To fit:...
€296,57 €245,10 €270,16 €223,27
You save 9%
 
 
GRANIT Control unit This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The con
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€718,74 €594,00 €605,78 €500,64
You save 16%
 
 
GRANIT GRANIT double pump
GRANIT
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. More
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€255,67 €211,30 €232,90 €192,48
You save 9%
 
 
GRANIT Guard ring right, for lifting shaft
GRANIT
Dimensions: 85 x 70 x 10 mm. More
Dimensions: 85 x 70 x 10 mm.
€29,83 €24,65 €28,14 €23,26
You save 6%
 
 
GRANIT Push button switch Hazard warning lights
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€39,99 €33,05 €37,19 €30,74
You save 7%
 
 
HELLA Rear light
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€28,44 €23,50 €27,96 €23,11
You save 2%
 
 
HELLA Relay Working current (make contact)
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,06 €16,58 €18,66 €15,42
You save 7%
 
 
HELLA Rear light right Fendt, John Deere, Kubota
HELLA
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S, 303, 304, 305, 306, 307 (Typn 170, 175), 308 (Typn 178, 308), 309 (Typn 186, 3... More
To fit as: Fendt Farmer 102S, 103S, 104S, 105S, 106S, 108S, 200S, 201S...
€22,69 €18,75 €21,10 €17,44
You save 7%
 
 
Showing 25 - 48 of 238

Parts for your Deutz-Fahr DX 4.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 4.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 4.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 4.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Guide width
Connecting pin
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart