Menu
EUR

Tractor parts Deutz-Fahr DX 4.70

Looking for parts for your Deutz-Fahr DX 4.70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

341 parts found for Deutz-Fahr DX 4.70
Show:
Exhaust manifold Deutz-Fahr
€195,61 €161,66 €178,00 €147,11
You save 9%
Handle right and left Deutz-Fahr Actor 5510, Topliner 4090
€152,40 €125,95 €138,70 €114,63
You save 9%
Bush left lift arm 71 x 80 x 85 mm Deutz-Fahr
Dimensions: 71 x 80 x 85 mm. More
Dimensions: 71 x 80 x 85 mm.
€147,22 €121,67 €134,00 €110,74
You save 9%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€179,42 €148,28 €163,30 €134,96
You save 9%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€40,97 €33,86 €37,25 €30,79
You save 9%
Lift rod 485 mm, M27 x 3, hole spacing 200 mm Deutz-Fahr
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 200 mm. More
Dimensions: Length = 485, Thread = M27 x 3, Hole spacing = 200 mm.
€162,75 €134,50 €148,15 €122,44
You save 9%
GRANIT Yoke lift arm Ø 25,25 mm, thread M27 x 3 Deutz-Fahr
GRANIT
Dimensions: Ø = 25.25, Thread = M27 x 3 mm. More
Dimensions: Ø = 25.25, Thread = M27 x 3 mm.
€402,65 €332,77 €366,55 €302,93
You save 9%
Pin for ball joint Deutz-Fahr
€175,13 €144,74 €159,40 €131,74
You save 9%
GRANIT Pin 25 x 105 mm Deutz-Fahr
GRANIT
Dimensions: 25 x 105 mm. More
Dimensions: 25 x 105 mm.
€74,87 €61,88 €68,15 €56,32
You save 9%
Sensor speed inductive encoder
Version: Inductive displacement sensor (speed). More
Version: Inductive displacement sensor (speed).
€91,79 €75,86 €83,55 €69,05
You save 9%
GRANIT Rotary switch ventilation, without knob, 5 connections
GRANIT
Version: For blower, 3 switching steps, With 5 blade terminals. More
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,59 €35,20 €38,75 €32,02
You save 9%
HELLA Headlight left / right 12 V, R2, Ø 180 mm, built-in
HELLA
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 180 mm. Form: Round. Inner Ø: 144,5 mm. Material: Plastic, diffusing lens: glass... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2 (Bilux). Outer Ø: 1...
€118,44 €97,88 €114,00 €94,21
You save 4%
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€19,45 €16,07
GRANIT Brake pad set 77 x 19 x 70 mm, drive shaft
GRANIT
To fit as: Deutz AgroPrima 4.51, AgroCompact 3.30 V/F, 3.50 S, 3.50 V/F, 3.70 V/F, 3.90 F, 3.90 S, Intrac 2004, DX 80, 86, 4.10, 4.30, 4.50, 4.70, 6.0... More
To fit as: Deutz AgroPrima 4.51, AgroCompact 3.30 V/F, 3.50 S, 3.50 V/...
€31,65 €26,16
Bosch/Rexroth Hydraulic pump 19 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch/Rexroth
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 19 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output ...
€633,15 €523,26 €576,40 €476,36
You save 9%
Bosch/Rexroth Hydraulic pump 11 cm³ anticlockwise, claw 17,8 x 8 Deutz-Fahr, Fendt
Bosch/Rexroth
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 More
Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222380 | Direction of ...
€582,33 €481,26 €530,10 €438,10
You save 9%
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.074,22 €887,79 €1.034,55 €855,00
You save 4%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€205,54 €169,87 €187,10 €154,63
You save 9%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€226,14 €186,89 €205,85 €170,12
You save 9%
LUK Clutch plate 280UKF 31 x 36 mm, 16 splines Deutz-Fahr
LUK
Dimensions (mm): 31 x 36 16 grooves More
Dimensions (mm): 31 x 36 16 grooves
€215,77 €178,32 €196,40 €162,31
You save 9%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€503,99 €416,52 €388,30 €320,91
You save 23%
GRANIT Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
GRANIT
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web (mm): 79 | Dimensions (mm): 41 x 45, 21 grooves | Additional information: Made i... More
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web ...
€857,96 €709,06 €781,00 €645,45
You save 9%
Showing 169 - 192 of 341

Parts for your Deutz-Fahr DX 4.70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 4.70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 4.70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 4.70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart