Menu
EUR

Tractor parts Deutz-Fahr DX 6.05

Looking for parts for your Deutz-Fahr DX 6.05 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

320 parts found for Deutz-Fahr DX 6.05
Show:
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €52,60 €43,47
You save 9%
HELLA Rear light 158 x 64 x 51 mm, 12 V, left, P21W, R10W
HELLA
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hole spacing: 45 mm. Dimensions W x H x D: 158 x 64 x 51 mm. Depth: 51 mm. Fixing: ... More
Bulb: P21W, R10W. Width: 158 mm. Form: Rectangular. Height: 64 mm. Hol...
€35,50 €29,34
GRANIT Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
GRANIT
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nominal voltage: 12 / 24 V. Test mark: E20. Light function: Dipped beam, ful... More
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, rig...
€152,15 €125,74 €138,50 €114,46
You save 9%
Relays relays changeover contact 12 V / 30 A, 5-pin, with holder
Version: 12 V / 30 A With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A With bracket, 5-pin, blade terminal 6.3 mm.
€12,45 €10,29
GRANIT Start switch 12 V / 24 V, built-in-Ø 28 mm - 2 keys
GRANIT
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 743XL, 745XL, 844XL, 845XL, 856XL 955XL, 1055XL, Deutz-Fahr AgroPrima 4.31, 4.51, ... More
To fit as: Case IH 485XL, 585, 585XL, 685, 685XL, 785XL, 885, 885XL 74...
€48,78 €40,31 €44,40 €36,69
You save 9%
Brake pad set 90 x 15 x 73,8 mm, drive shaft and foot brake
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50 More
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50
€63,59 €52,55 €57,85 €47,81
You save 9%
LUK Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
LUK
Contents: Pressure plate 458231002017, clutch plate 458328011616 More
Contents: Pressure plate 458231002017, clutch plate 458328011616
€1.199,68 €991,47 €1.092,15 €902,60
You save 9%
GRANIT Clutch cable driving clutch 685 mm, sleeve 450 mm, M6 Deutz-Fahr
GRANIT
Thread: M6 | Sleeve length (mm): 450 | Cable length (mm): 685 More
Thread: M6 | Sleeve length (mm): 450 | Cable length (mm): 685
€175,62 €145,14 €159,85 €132,11
You save 9%
SACHS Release bearing spring 2 g
GRANIT Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
GRANIT
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Direction of rotatio... More
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 ...
€170,34 €140,78 €155,00 €128,10
You save 9%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | Additional information: Dust-tight, with W connection | Belt tension... More
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rota...
€236,43 €195,40 €215,20 €177,85
You save 9%
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Elring
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one cylinder head | AF (mm): 17 More
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary se...
€118,56 €97,98 €107,90 €89,17
You save 9%
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Elring
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro rubber) More
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: F...
€70,51 €58,27 €64,15 €53,02
You save 9%
Universal joint 35 x 97 mm, centralised lubrication
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centralised lubrication. More
A: 35 mm. B: 97 mm. Universal joint size: . Lubrication system: Centra...
€126,01 €104,14 €114,70 €94,79
You save 9%
GRANIT Track rod 761 mm, M18 x 1,5, taper 20 - 22,2 mm, Ø 28 mm
GRANIT
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 ...
€106,00 €87,60 €96,50 €79,75
You save 9%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Length: 83,5 mm mm. Wire thickness: 2 mm mm. More
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,53 €3,74
GRANIT Bleed valve M7 x 1 x 16 mm Deutz-Fahr
GRANIT
Dimensions: M7 x 1 x 16 mm. To fit: 71704081. Version: Can be used for any vehicle. More
Dimensions: M7 x 1 x 16 mm. To fit: 71704081. Version: Can be used for...
€45,85 €37,89
GRANIT Bleed valve ATE version DOT4 Deutz
GRANIT
Medium: DOT4. More
Medium: DOT4.
€15,50 €12,81
Bleed valve ATE version DOT4 Deutz
€10,55 €8,72
Repair set foot brake old version ATE Deutz-Fahr DX
€221,09 €182,72 €213,55 €176,49
You save 3%
Fixed caliper, complete ATE top right, DOT 4, without brake pads
Description: Suitable brake pad set 71704019. More
Description: Suitable brake pad set 71704019.
€966,29 €798,59 €879,70 €727,02
You save 9%
GRANIT PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr DX
GRANIT
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm. More
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€484,42 €400,35 €441,00 €364,46
You save 9%
Showing 121 - 144 of 320

Parts for your Deutz-Fahr DX 6.05 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.05. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.05. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.05. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart