Menu
EUR

Tractor parts Deutz-Fahr DX 6.10

Looking for parts for your Deutz-Fahr DX 6.10 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

313 parts found for Deutz-Fahr DX 6.10
Show:
GRANIT Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
GRANIT
Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€13,75 €11,36
 
GRANIT Thrust washer standard Deutz-Fahr
GRANIT
Thrust washer standard Deutz-Fahr
€32,40 €26,78
 
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,...
€4,55 €3,76
 
GRANIT Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
GRANIT
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€22,15 €18,31
 
Silencer vertical 1230 mm, Ø 67 mm Deutz-Fahr
9%
Silencer vertical 1230 mm, Ø 67 mm Deutz-Fahr
Version: Length: 1230 mm, Inner Ø: 67 mm, Outlet Ø: 70 mm.
€268,88 €222,21 €244,75 €202,27
 
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Bolt set 1ste steering valve M10 x 100 Deutz-Fahr
Technical data: M10 x 100.
€15,60 €12,89
 
GRANIT Seal kit steering valve Deutz-Fahr
GRANIT
Seal kit steering valve Deutz-Fahr
Description: for control unit 04360630, 04378905, 04383202, 04383203.
€14,00 €11,57
 
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
9%
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,...
€232,74 €192,35 €211,85 €175,08
 
Gas strut door 140 N, 600 mm, stroke 150 mm Deutz-Fahr DX 7.10-80
9%
Gas strut door 140 N, 600 mm, stroke 150 mm Deutz-Fahr DX 7.10-80
suitable for: Tür. Newtons: 140. A: 600 mm. B: 360 mm. C: 8 mm. D: 8 mm. Form: 2...
€84,31 €69,68 €76,75 €63,43
 
GRANIT Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
9%
GRANIT
Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
€128,60 €106,28 €117,00 €96,69
 
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
O-ring for oil dipstick 30 x 3,5 mm Deutz-Fahr
Dimensions: 30 x 3.5 mm.
€16,00 €13,22
 
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
9%
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection: Flat hea...
€86,14 €71,19 €78,40 €64,79
 
GRANIT Drive shaft 2130 mm, M18 x 1,5 / M22 x 1,5
9%
GRANIT
Drive shaft 2130 mm, M18 x 1,5 / M22 x 1,5
Version: Thread: M18 x 1.5 / M22 x 1.5.
€194,70 €160,91 €177,25 €146,49
 
Push button switch marker-/parking light 12/24 V, button yellow
9%
Push button switch marker-/parking light 12/24 V, button yellow
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€40,73 €33,66 €37,00 €30,58
 
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
9%
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs incl...
€70,46 €58,23 €64,10 €52,98
 
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€10,65 €8,80
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€19,45 €16,07
 
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
9%
Starter motor 12 V, 2,7 kW, 9 teeth, 223 mm, clockwise
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Hol...
€297,93 €246,22 €271,20 €224,13
 
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
9%
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345), 350GT (...
€408,45 €337,56 €371,80 €307,27
 
GRANIT Hood lock holder right Deutz, Deutz-Fahr
9%
GRANIT
Hood lock holder right Deutz, Deutz-Fahr
Tractor types: Deutz AgroStar 6.61, 6.71, 6.81, DX 4.10, 4.30, 4.50, 4.70, 6.05,...
€72,32 €59,77 €65,80 €54,38
 
Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
To fit as: Fendt F 231 GT from serial no. 16774
€2,71 €2,24
 
Clutch plate 310 with torsion damper, 41 x 45 mm, 21 splines, sintered
9%
Clutch plate 310 with torsion damper, 41 x 45 mm, 21 splines, sintered
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sintered clutch ...
€538,77 €445,26 €490,35 €405,25
 
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
4%
Scharmüller
Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide...
€1.378,56 €1.139,31 €1.327,65 €1.097,23
 
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
15%
Scharmüller
Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal w...
€1.371,22 €1.133,24 €1.162,15 €960,45
 
Showing 241 - 264 of 313

Parts for your Deutz-Fahr DX 6.10 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.10. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.10. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.10. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart