Web Analytics
Deutz-Fahr DX 6.10 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr DX 6.10

Looking for parts for your Deutz-Fahr DX 6.10 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

269 parts found for Deutz-Fahr DX 6.10
Show:
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
2%
GRANIT
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€36,36 €30,05 €35,63 €29,45
 
GRANIT Push button switch windshield wiper/-nozzle system 12/24 V, button green
2%
GRANIT
Push button switch windshield wiper/-nozzle system 12/24 V, button green
Version: 12/24 V, Green button, without lock, Ø 30 mm, 4 blade terminals 6.3 x 0...
€27,23 €22,50 €26,69 €22,06
 
GRANIT Push button switch marker-/parking light 12/24 V, button yellow
2%
GRANIT
Push button switch marker-/parking light 12/24 V, button yellow
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8...
€39,03 €32,26 €38,25 €31,61
 
GRANIT Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
2%
GRANIT
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs incl...
€67,52 €55,80 €66,17 €54,69
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
15%
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€15,58 €12,88 €13,19 €10,90
 
GRANIT Push button switch work lamp 12 / 24 V, button yellow, 4 blade terminals
2%
GRANIT
Push button switch work lamp 12 / 24 V, button yellow, 4 blade terminals
To fit as: Deutz-Fahr AgroCompact 3.30 V/F, 3.50, 3.50 S, 3.50 V/F, 3.70 V/F, 3....
€33,20 €27,44 €32,54 €26,89
 
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
15%
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345), 350GT (...
€411,71 €340,26 €349,95 €289,21
 
GRANIT Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
12%
GRANIT
Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
To fit as: Fendt F 231 GT from serial no. 16774
€2,17 €1,79 €1,90 €1,57
 
Bosch/Rexroth Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Bosch/Rexroth
Hydraulic pump 22,5 cm³ left Deutz-Fahr DX 85 - 145
Drive shaft: Splined shaft 17 x 14 9 splines | Adaptor plate hole pattern (mm): ...
€621,91 €513,98
 
GRANIT Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
GRANIT
Double clutch DuT 310 41 x 45 mm, 21 splines Deutz-Fahr
Contents: 445K88052034AT | Flywheel dimension (mm): 3 (erhöht) | web (mm): 79 | ...
€816,22 €674,56
 
GRANIT Clutch kit (used part refurbishment) 310/310 sintered, 44 x 48 mm, 22 splines Deutz-Fahr
GRANIT
Clutch kit (used part refurbishment) 310/310 sintered, 44 x 48 mm, 22 splines Deutz-Fahr
Dimensions (mm): 44 x 48, 22 grooves, 44 x 48, 22 grooves | Additional informati...
€918,92 €759,44
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
5%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€545,81 €451,08 €518,84 €428,79
 
GRANIT Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
2%
GRANIT
Universal joint 30 x 83 mm, 1x outer lubrication / centralised lubrication
A: 30 mm. B: 83 mm. Universal joint size: . Lubrication system: 1 x external lub...
€55,39 €45,78 €54,28 €44,86
 
Repair set brake cylinder DOT4 Deutz-Fahr
2%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston.
€44,14 €36,48 €43,26 €35,75
 
Push rod brake cylinder DOT4 Deutz-Fahr
3%
Push rod brake cylinder DOT4 Deutz-Fahr
Medium: DOT4.
€34,90 €28,84 €33,96 €28,07
 
GRANIT Repair set brake cylinder without piston Deutz DX 80-250
2%
GRANIT
Repair set brake cylinder without piston Deutz DX 80-250
Additional information: Without piston.
€47,59 €39,33 €46,64 €38,55
 
GRANIT Repair set foot brake ATE version Deutz-Fahr DX
2%
GRANIT
Repair set foot brake ATE version Deutz-Fahr DX
€46,80 €38,68 €45,86 €37,90
 
GRANIT Brake disc Ø 284 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
15%
GRANIT
Brake disc Ø 284 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
€309,64 €255,90 €263,19 €217,51
 
GRANIT PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
15%
GRANIT
PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm.
€488,08 €403,37 €414,87 €342,87
 
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
2%
VICTOR REINZ
Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €35,10 €29,01
 
GRANIT Seal 80 x 3 mm Fendt, Deutz-Fahr
2%
GRANIT
Seal 80 x 3 mm Fendt, Deutz-Fahr
Dimensions: 80 x 3 mm.
€11,66 €9,64 €11,43 €9,45
 
GRANIT Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
2%
GRANIT
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€2,32 €1,92 €2,27 €1,88
 
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
5%
GRANIT
Piston ring set 4 rings, Ø 100 mm, 2,5/2,5/2,5/5 mm Deutz-Fahr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring), 2.5 mm, 2.5 mm, 5 mm.
€105,39 €87,10 €100,12 €82,74
 
GRANIT Sealing ring exhaust Deutz-Fahr
2%
GRANIT
Sealing ring exhaust Deutz-Fahr
€43,00 €35,54 €42,14 €34,83
 
Showing 97 - 120 of 269

Parts for your Deutz-Fahr DX 6.10 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.10. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.10. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.10. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart