Web Analytics
Deutz-Fahr DX 6.10 tractor parts - Techniek Totaal
Menu
EUR

Tractor parts Deutz-Fahr DX 6.10

Looking for parts for your Deutz-Fahr DX 6.10 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

215 Products
Show:
GRANIT Control unit This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The con
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€650,60 €537,69 €544,24 €449,79
You save 16%
 
GRANIT Gasket set
GRANIT
Description: for control unit 04360630, 04378905, 04383202, 04383203. More
Description: for control unit 04360630, 04378905, 04383202, 04383203.
€10,79 €8,92 €10,25 €8,47
You save 5%
 
GRANIT Gasket thickness 0.2 mm
€0,67 €0,55 €0,64 €0,53
You save 4%
 
GRANIT Door lock left
€87,16 €72,03 €82,80 €68,43
You save 5%
 
GRANIT Inner ring left, for lifting shaft
GRANIT
Dimensions: 75 x 88.6 x 1 mm. More
Dimensions: 75 x 88.6 x 1 mm.
€42,65 €35,25 €40,52 €33,49
You save 5%
 
GRANIT Guard ring left, for lifting shaft
GRANIT
Dimensions: 90 x 75 x 10 mm. More
Dimensions: 90 x 75 x 10 mm.
€28,80 €23,80 €27,36 €22,61
You save 5%
 
GRANIT Inner ring right, for lifting shaft
GRANIT
Dimensions: 70 x 84 x 1 mm. More
Dimensions: 70 x 84 x 1 mm.
€48,22 €39,85 €45,81 €37,86
You save 5%
 
GRANIT Gasket for power lift housing
GRANIT
Dimensions: 240 x 300 mm. More
Dimensions: 240 x 300 mm.
€58,87 €48,65 €55,93 €46,22
You save 5%
 
GRANIT Bush right, for lifting shaft
GRANIT
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€154,76 €127,90 €147,02 €121,50
You save 5%
 
GRANIT Sealing ring for piston
GRANIT
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€35,57 €29,40 €33,79 €27,93
You save 5%
 
Walterscheid Piton Fix to fit as system
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.553,64 €1.284,00 €1.299,62 €1.074,07
You save 16%
 
GRANIT Driver For angle drive/drive shaft
GRANIT
Version: For angle drive. More
Version: For angle drive.
€57,35 €47,40 €54,48 €45,02
You save 5%
 
GRANIT Push button switch Full beam
GRANIT
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (31- S1- S2- S- +), Dustproof and splashproof, With glass socket bulb ... More
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals ...
€43,92 €36,30 €41,72 €34,48
You save 5%
 
HELLA Indicator/position light Left/right
HELLA
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 120 mm. Form: Rectangular. Height: 80... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment:...
€21,60 €17,85 €21,23 €17,55
You save 2%
 
GRANIT Relay Make contact
GRANIT
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal. More
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€7,74 €6,40 €7,35 €6,07
You save 5%
 
HELLA Relay Working current (make contact)
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€20,06 €16,58 €16,13 €13,33
You save 20%
 
HELLA Lens Rear light John Deere, Deutz-Fahr, Kubota, Fendt, Eicher, MF, Manitou
HELLA
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850V, 1140F, 1640F, 1840F, 1850F, 1950F, 2250F, 2650F, 1550, 1640, 1750, 1840, 1850... More
To fit as: John Deere 940, 1040, 1140, 940V, 1040V, 1140V, 1750V, 1850...
€16,95 €14,01 €13,64 €11,27
You save 20%
 
Starter 12 V / 2.7 kW
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345), 350GT (Typ 345), 360GT (Typ 360), 365GT (Typ 365), 370GT (Typ 148), 370GT (Ty... More
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345...
€399,03 €329,78 €365,32 €301,92
You save 8%
 
FLEETGUARD Fuel filter FF5135
€18,09 €14,95 €17,19 €14,21
You save 5%
 
GRANIT Repair set
GRANIT
Additional information: Without piston. More
Additional information: Without piston.
€54,70 €45,21 €51,97 €42,95
You save 5%
 
GRANIT Bleed valve ATE version, Fits fixed caliper 71704075, 71704074, 71704077, 71704076
€8,53 €7,05 €8,10 €6,69
You save 5%
 
GRANIT Fixed caliper ATE version, DOT 4, Without brake pads
GRANIT
Description: Bottom left, Suitable brake pad set 71704019. More
Description: Bottom left, Suitable brake pad set 71704019.
€1.082,43 €894,57 €900,49 €744,21
You save 17%
 
GRANIT Brake disc 284 x 22 mm, 8 holes, for Cardan shaft
€280,60 €231,90 €260,83 €215,56
You save 7%
 
GRANIT Brake drum/disc Inner Ø = 180 mm, Brake disc Ø = 275 mm, Without taper, Brake disc thickness = 22.5 mm
GRANIT
Dimensions: Inner Ø: 180 Brake disk Ø: 275, Without taper, Brake disc thickness: 22.5 mm. More
Dimensions: Inner Ø: 180 Brake disk Ø: 275, Without taper, Brake dis...
€346,79 €286,60 €315,91 €261,08
You save 9%
 
Showing 121 - 144 of 215

Parts for your Deutz-Fahr DX 6.10 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 6.10. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 6.10. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 6.10. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Guide width
Connecting pin
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart