Menu
EUR

Tractor parts Deutz-Fahr DX 85

Looking for parts for your Deutz-Fahr DX 85 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

269 parts found for Deutz-Fahr DX 85
Show:
Bosch/Rexroth Double pump anticlockwise 22,5 + 16 cm³/rpm. Deutz-Fahr
9%
Bosch/Rexroth
Double pump anticlockwise 22,5 + 16 cm³/rpm. Deutz-Fahr
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft B 17 x 14 Z9. Direct...
€954,70 €789,01 €869,15 €718,31
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
4%
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact ...
€1.986,12 €1.641,42 €1.903,30 €1.572,98
 
Scharmüller Drawbar frame standard 330/25/32 mm, 3000 kg, black Deutz-Fahr, Steyr
15%
Scharmüller
Drawbar frame standard 330/25/32 mm, 3000 kg, black Deutz-Fahr, Steyr
To fit as: Deutz-Fahr Serie DX AgroPrima, DX Agrostar, DX AgroXtra, DX-4-Reihe, ...
€1.174,69 €970,82 €995,55 €822,77
 
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
4%
PROBOSS
Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longit...
€1.299,25 €1.073,76 €1.245,00 €1.028,93
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.071,98 €1.712,38 €1.638,10 €1.353,80
 
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
9%
Filter dryer airco 229 mm, Ø 76 mm, #6 3/8 o-ring Deutz-Fahr, Fendt
Material: Steel | Thread: #6 3/8 O-ring | Weight (g): 783 | Connection thread E:...
€60,62 €50,10 €55,15 €45,58
 
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
9%
LUK
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
Dimensions (mm): 20 x 52 x 15
€35,51 €29,35 €32,30 €26,69
 
Alternator 14 V / 95 A, flange 56 mm
9%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (...
€193,94 €160,28 €176,55 €145,91
 
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
40%
MAHLE
Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,85 €346,16
 
GRANIT Drive shaft 1235 mm Deutz-Fahr Series 06-07C, D 7206-7807C, DX 85-90
9%
GRANIT
Drive shaft 1235 mm Deutz-Fahr Series 06-07C, D 7206-7807C, DX 85-90
Length: 1235 mm.
€1.179,30 €974,63 €1.073,60 €887,27
 
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
9%
Master brake cylinder piston Ø 19,05 mm, DOT 4 Deutz-Fahr
Hole Ø: 19.05 mm.
€483,27 €399,40 €439,95 €363,60
 
GRANIT Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
9%
GRANIT
Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm.
€62,07 €51,30 €56,50 €46,69
 
GRANIT Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
9%
GRANIT
Oil cooler Fendt GT 380, Deutz-Fahr D 6806 - D 7207
€261,18 €215,85 €237,75 €196,49
 
Exhaust manifold Deutz-Fahr DX 85-120, DX 6.10-6.30
9%
Exhaust manifold Deutz-Fahr DX 85-120, DX 6.10-6.30
€351,29 €290,32 €319,80 €264,30
 
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Thrust washer rear thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€17,30 €14,30
 
GRANIT Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
GRANIT
Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Engine types: FL912, FL913, BFL913. Supplementary set: For one cylinder head. Ad...
€18,50 €15,29
 
GRANIT Bolt set original end plate 1x M8 x 180, 2x M8 x 170 Deutz-Fahr
9%
GRANIT
Bolt set original end plate 1x M8 x 180, 2x M8 x 170 Deutz-Fahr
Technical data: consisting of: 1x M8 x 180, 2x M8 x 170 .
€39,55 €32,69 €36,00 €29,75
 
Bosch/Rexroth Hydraulic pump anticlockwise 16 cm³/rpm., taper 1:5, Ø 17 x 17
9%
Bosch/Rexroth
Hydraulic pump anticlockwise 16 cm³/rpm., taper 1:5, Ø 17 x 17
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotati...
€552,64 €456,73 €503,10 €415,79
 
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
9%
GRANIT
Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 5480...
€43,59 €36,02 €39,65 €32,77
 
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
21%
Walterscheid
Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. ...
€276,01 €228,11 €218,20 €180,33
 
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade...
€26,20 €21,65
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€27,00 €22,31
 
LUK Clutch kit Deutz-Fahr DX 85 - DX 90
4%
LUK
Clutch kit Deutz-Fahr DX 85 - DX 90
Contents: Pressure plate 458230000911, clutch plate 458328011616
€1.299,25 €1.073,76 €1.247,20 €1.030,74
 
Showing 49 - 72 of 269

Parts for your Deutz-Fahr DX 85 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 85. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 85. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 85. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart