Menu
EUR

Tractor parts Deutz-Fahr DX 85

Looking for parts for your Deutz-Fahr DX 85 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

269 parts found for Deutz-Fahr DX 85
Show:
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.378,56 €1.139,31 €1.327,65 €1.097,23
You save 4%
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€326,57 €269,89 €195,55 €161,61
You save 40%
SACHS Thrust bearing 55 x 91 x 22 mm Deutz-Fahr D 6006-D 7807, DX 80-DX 120
SACHS
Dimensions (mm): 55 x 91 x 22 More
Dimensions (mm): 55 x 91 x 22
€215,70 €178,26 €196,35 €162,27
You save 9%
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.243,85 €1.854,42
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest.... More
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat ...
€2.082,30 €1.720,91
Track rod 761 mm, M18 x 1,5, taper 20 - 22,2 mm, Ø 28 mm
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 761 mm. C: M18 x 1,5 mm. D: 28 mm. E: 20 mm. F: 22,2 mm. Taper: 20 ...
€106,00 €87,60 €96,50 €79,75
You save 9%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
Knott Industrietechnik Tension spring brake lining 89 mm, thread-Ø 2 mm, outer-Ø 10 mm Deutz-Fahr
Knott Industrietechnik
Length: 83,5 mm mm. Wire thickness: 2 mm mm. More
Length: 83,5 mm mm. Wire thickness: 2 mm mm.
€4,53 €3,74
Repair set foot brake brake caliper Deutz-Fahr DX 85 - DX 120
€180,56 €149,22 €164,35 €135,83
You save 9%
Repair set foot brake old version ATE Deutz-Fahr DX
€221,09 €182,72 €213,55 €176,49
You save 3%
Fixed caliper, complete ATE top right, DOT 4, without brake pads
Description: Suitable brake pad set 71704019. More
Description: Suitable brake pad set 71704019.
€966,29 €798,59 €879,70 €727,02
You save 9%
Walterscheid Ball hitch flange ball 80, 140 x 80 mm, 82,4 kN, M17, black
Walterscheid
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-value: 82,4 kN. Hole: M17 mm. No. of holes: 4. Colour: Black. Description: The dim... More
Lock: ball 80. Hole pattern: 140 x 80 mm. Load capacity: 2700 kg. D-va...
€1.742,44 €1.440,03 €1.377,55 €1.138,47
You save 21%
Clevis for lifting arm length 120 mm, Ø 25 mm, Ø slot 29,5 mm Deutz
Dimensions (mm): Length = 120. Ø = 25. Ø slot = 29.5. More
Dimensions (mm): Length = 120. Ø = 25. Ø slot = 29.5.
€662,40 €547,44
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€10,25 €8,47
VICTOR REINZ Cylinder head gasket set engine FL912, FL913, BFL913 Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL913. More
Engine types: FL912, FL913, BFL913.
€25,50 €21,07
Shaft seal Ø 25 mm, height 8 mm, FPM Fendt, Deutz-Fahr
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm. More
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm
€48,08 €39,74 €43,75 €36,16
You save 9%
Hose 22 x 29 x 50 mm Deutz-Fahr, Fendt
Dimensions: 22 x 29 x 50 mm. More
Dimensions: 22 x 29 x 50 mm.
€38,47 €31,79 €35,00 €28,93
You save 9%
Rocker bracket Fendt, Deutz-Fahr
Engine types: F3L912, F4L912, F6L912, F6L913, BFL913, FL712, FL812. More
Engine types: F3L912, F4L912, F6L912, F6L913, BFL913, FL712, FL812.
€97,70 €80,74 €88,90 €73,47
You save 9%
Connecting rod bush Ø 35 mm Fendt, Deutz-Fahr
Dimensions: Ø 35 mm. More
Dimensions: Ø 35 mm.
€8,90 €7,36
Tappet tube spring Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, FL712. More
Engine types: FL912, FL913, FL812, FL712.
€7,20 €5,95
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,56 €1,29
Gasket set, complete engine F5L912 5 cylinder Deutz-Fahr
Engine types: F5L912. Additional information: Without crankshaft sealing ring / without cylinder head gasket. More
Engine types: F5L912. Additional information: Without crankshaft seali...
€222,32 €183,74 €202,40 €167,27
You save 9%
Oil pump thread 32 x 2 mm Fendt, Deutz-Fahr
Dimensions: Thread 32 x 2 mm. More
Dimensions: Thread 32 x 2 mm.
€126,57 €104,60 €115,20 €95,21
You save 9%
Connecting rod bearing standard, Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: Ø 60 mm. More
Engine types: FL812, FL912. Dimensions: Ø 60 mm.
€10,45 €8,64
Main bearing standard Ø 70 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: 4. More
Engine types: FL812, FL912. Dimensions: 4.
€16,25 €13,43
Valve seat ring inlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€35,57 €29,40 €32,35 €26,74
You save 9%
Inlet valve 3-rings Deutz engine FL912, FL913, BFL913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€27,60 €22,81
Tank cap with ventilation, tank collar Ø 106 mm
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€30,85 €25,50
Bolt set 2de steering valve 3x M8 x 140 Deutz-Fahr
Technical data: 3x M8 x 140. Menke no.: 51681. More
Technical data: 3x M8 x 140. Menke no.: 51681.
€34,00 €28,10
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines, 17 x 14. Bosch no.: 0510765337. More
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines,...
€494,76 €408,89 €450,40 €372,23
You save 9%
Leaf spring Deutz-Fahr AgroPrima 4.31-4.56, DX 80-90, DX 4.10-4.50
€355,05 €293,43 €323,20 €267,11
You save 9%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€179,42 €148,28 €163,30 €134,96
You save 9%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€40,97 €33,86 €37,25 €30,79
You save 9%
Yoke for lower links M32, Ø 25 mm Deutz-Fahr
Dimensions: M32 Ø 25 mm. More
Dimensions: M32 Ø 25 mm.
€609,85 €504,01 €555,20 €458,84
You save 9%
Clevis lift arm thread M32 Deutz-Fahr
Dimensions: thread = M32 mm. More
Dimensions: thread = M32 mm.
€383,34 €316,81 €348,95 €288,39
You save 9%
Pin 25 x 105 mm Deutz-Fahr
Dimensions: 25 x 105 mm. More
Dimensions: 25 x 105 mm.
€74,87 €61,88 €68,15 €56,32
You save 9%
Rotary switch ventilation, without knob, 5 connections
Version: For blower, 3 switching steps, With 5 blade terminals. More
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,59 €35,20 €38,75 €32,02
You save 9%
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,00 €16,53
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€35,65 €29,46
Brake pad set 90 x 15 x 73,8 mm, drive shaft and foot brake
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50 More
To fit as: Deutz DX 85, 90, 92, 110, 120, 4.70, 6.05, 6.10, 6.30, 6.50
€63,59 €52,55 €57,85 €47,81
You save 9%
Hood lock holder right Deutz, Deutz-Fahr
Tractor types: Deutz AgroStar 6.61, 6.71, 6.81, DX 4.10, 4.30, 4.50, 4.70, 6.05, 6.10, 6.30, 6.50, 7.10, 80, 85, 86, 90, 92, 110, 120, 145, 160, 230, ... More
Tractor types: Deutz AgroStar 6.61, 6.71, 6.81, DX 4.10, 4.30, 4.50, 4...
€72,32 €59,77 €65,80 €54,38
You save 9%
Sealing ring hub Deutz D 55, 5505-8006
To fit as: Deutz D 55, 5505, 6005, 6006, 6806, 7006, 7206, 7506, 8006 More
To fit as: Deutz D 55, 5505, 6005, 6006, 6806, 7006, 7206, 7506, 8006
€11,95 €9,88
Sealing ring 50,5 x 59,5 x 5,5 mm Deutz D 55, 5505-8006
To fit as: Deutz D 55, 5505, 6005, 6006, 6806, 7006, 7206, 7506, 8006 More
To fit as: Deutz D 55, 5505, 6005, 6006, 6806, 7006, 7206, 7506, 8006
€14,35 €11,86
Showing 145 - 192 of 269

Parts for your Deutz-Fahr DX 85 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 85. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 85. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 85. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart