Web Analytics
Deutz-Fahr DX 86 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr DX 86

Looking for parts for your Deutz-Fahr DX 86 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

234 parts found for Deutz-Fahr DX 86
Show:
GRANIT Door lock, right Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, Intrac 2004
€123,24 €101,85 €117,08 €96,76
You save 5%
GRANIT Handle right Deutz-Fahr DX 4.10-160, Series DX 4-7
€133,58 €110,40 €126,90 €104,88
You save 5%
GRANIT Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
GRANIT
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,34 €134,99
You save 5%
GRANIT Pin 20 x 105 mm Deutz-Fahr
GRANIT
Dimensions: 20 x 105 mm. More
Dimensions: 20 x 105 mm.
€53,42 €44,15 €52,35 €43,26
You save 2%
Walterscheid Shunting hitch coupling pin 35 mm, hole pattern 140 x 80 mm
Walterscheid
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colour: black. Trailer load: 25000 kg. No. of holes: 4. Description: Towing coupling... More
Hole pattern: 140 x 80 mm. Hole Ø: 17 mm. Connecting pin: 35 mm. Colo...
€264,51 €218,60 €229,71 €189,84
You save 13%
GRANIT Push button switch windshield wiper 12/24 V, button yellow, Ø 30 mm
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (+- 53a- 53- 31b- 31), Dustproof and splashproof, With glass socket ... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminal...
€39,55 €32,69 €38,76 €32,03
You save 2%
GRANIT Push button switch work lamp 12 / 24 V, button yellow, Ø 30 mm
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€39,25 €32,44 €38,47 €31,79
You save 2%
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€15,58 €12,88 €13,19 €10,90
You save 15%
GRANIT Clutch plate 310 with torsion damper, 41 x 45 mm, 21 splines, sintered
GRANIT
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sinter...
€512,44 €423,50
Bosch/Rexroth Hydraulic pump 19 cm³ anticlockwise, taper 1:5, Ø 17 x 17 Deutz-Fahr
Bosch/Rexroth
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 19 | Drive shaft: Taper 1:5, Ø 17 x 17 More
Bosch no.: 1517222716 | Direction of rotation: Anticlockwise | Output ...
€602,35 €497,81
Bosch/Rexroth Hydraulic pump 11 cm³/rpm., claw 17,8 x 8, left Deutz-Fahr
Bosch/Rexroth
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Drive shaft: Claw, Ø 17.8 x 8 | Bosch no.: 1517222715 More
Direction of rotation: Anticlockwise | Output volume (cc/rev): 11 | Dr...
€446,85 €369,30
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.490,33 €1.231,68
Scharmüller Drawbar frame 74 kN, 3000 kg, rail 330 mm, pin Ø 25 mm, draw pendulum
Scharmüller
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 330 | Detent pin Ø (mm): 25 | Load capacity (kg): 3000 | Colour: Kubota grey | Gu... More
D-value (kN): 74 | Version: Prepared for drawbar | Rail width (mm): 33...
€1.393,30 €1.151,49
Scharmüller Drawbar frame 43,2 kN, rail 330 mm, guide 32 mm, pin Ø 25 mm
Scharmüller
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (kg): 2000 | Guide width (mm): 32 | Rail width (mm): 330 | Version: Prepared for d... More
Detent pin Ø (mm): 25 | Category: Bearing supports | Load capacity (k...
€1.161,31 €959,76
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€44,14 €36,48 €43,26 €35,75
You save 2%
Push rod brake cylinder DOT4 Deutz-Fahr
€34,90 €28,84 €33,96 €28,07
You save 3%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,79 €27,10
You save 4%
GRANIT Repair set brake cylinder without piston Deutz-Fahr
GRANIT
Additional information: Without piston. More
Additional information: Without piston.
€53,61 €44,31
GRANIT Cover brake reservoir Deutz-Fahr, Still
€12,04 €9,95 €11,80 €9,75
You save 2%
GRANIT Wheel brake cylinder Ø 38,1 mm, rear, drum brake, DOT 4 Deutz-Fahr
€403,12 €333,16 €342,65 €283,18
You save 15%
GRANIT Brake drum inner-Ø 254 mm, new version Deutz-Fahr
€462,10 €381,90 €392,79 €324,62
You save 15%
GRANIT PTO shaft end piece 299 mm, 1 3/8 inch 6 splines, 540 rpm
GRANIT
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm. More
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€555,92 €459,44 €472,53 €390,52
You save 15%
GRANIT Gaiter Ø 31 mm upper Deutz DX 80-145
GRANIT
Inner Ø top: 31 mm. More
Inner Ø top: 31 mm.
€59,80 €49,42 €58,60 €48,43
You save 2%
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €77,94 €64,41
You save 2%
Showing 121 - 144 of 234

Parts for your Deutz-Fahr DX 86 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr DX 86. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr DX 86. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr DX 86. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart