Menu
EUR

Tractor parts Deutz-Fahr Intrac 2003

Looking for parts for your Deutz-Fahr Intrac 2003 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

192 parts found for Deutz-Fahr Intrac 2003
Show:
GRANIT Yoke lift arm 260 mm, Ø 16 mm, thread M22 x 2 Deutz-Fahr
9%
GRANIT
Yoke lift arm 260 mm, Ø 16 mm, thread M22 x 2 Deutz-Fahr
Dimensions: Length = 260, Ø = 16, Thread = M22 x 2 mm.
€177,01 €146,29 €161,10 €133,14
 
HELLA Oil pressure switch engine M10 x 1 conical, 0,15 - 0,45 bar, 12 V
HELLA
Oil pressure switch engine M10 x 1 conical, 0,15 - 0,45 bar, 12 V
Version: Thread: M10 x 1 tapered, Switching pressure: 0.15-0.45 bar, Blade termi...
€28,70 €23,72
 
GRANIT Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
GRANIT
Relays N/O-contact 12 V / 2x 20 A, 5-pin, with holder, blade terminal
Version: 12 V / 2 x 20 A, with holder, 5-pin, blade terminal.
€10,65 €8,80
 
HELLA Lens, left / right - 2 pieces
HELLA
Lens, left / right - 2 pieces
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€31,92 €26,38
 
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
9%
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345), 350GT (...
€408,45 €337,56 €371,80 €307,27
 
Brake lining foot brake 60 x 7,0 x 338 mm, 14-hole Deutz 4006-5506
Brake lining foot brake 60 x 7,0 x 338 mm, 14-hole Deutz 4006-5506
To fit as: Deutz 4006, 4505, 4506, 5005, 5006, 5506
€32,75 €27,07
 
GRANIT Sealing ring stub axle 45 x 79 x 18 mm Deutz D 55, 5505-8006
GRANIT
Sealing ring stub axle 45 x 79 x 18 mm Deutz D 55, 5505-8006
To fit as: Deutz D 55, 5505, 6005, 6006, 6806, 7006, 7206, 7506, 8006
€29,80 €24,63
 
LUK Thrust bearing 55 x 92 x 16 mm Deutz-Fahr D 4006 - D 6907C
1%
LUK
Thrust bearing 55 x 92 x 16 mm Deutz-Fahr D 4006 - D 6907C
Dimensions (mm): 55 x 92 x 16
€115,28 €95,27 €114,00 €94,21
 
GRANIT Double clutch DuT 295 36 x 40 mm, 20 splines Deutz-Fahr
9%
GRANIT
Double clutch DuT 295 36 x 40 mm, 20 splines Deutz-Fahr
Dimensions (mm): 36 x 40, 20 grooves | Flywheel design: Flat | Material specific...
€685,60 €566,61 €624,15 €515,83
 
GRANIT Thrust bearing driving clutch 55 x 92 x 16 mm Deutz-Fahr
9%
GRANIT
Thrust bearing driving clutch 55 x 92 x 16 mm Deutz-Fahr
Dimensions (mm): 55 x 92 x 16
€116,15 €95,99 €105,70 €87,36
 
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VII
Seat heater: Optional | Length (mm): 631 | Included in delivery: Seat supplied w...
€2.082,30 €1.720,91
 
VICTOR REINZ Air receiver gasket engine FL912, FL913, BFL913
VICTOR REINZ
Air receiver gasket engine FL912, FL913, BFL913
Engine types: FL912, FL913, BFL913.
€3,77 €3,12
 
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Brass nut exhaust manifold M8, height 10 mm Deutz-Fahr
Version: Thread M8, Height: 10 mm. Thread: M8.
€7,55 €6,24
 
GRANIT Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
GRANIT
Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,45 €9,46
 
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm.
€3,44 €2,84
 
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm.
€2,71 €2,24
 
GRANIT Valve guide inlet and outlet Fendt, Deutz-Fahr
GRANIT
Valve guide inlet and outlet Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€7,75 €6,41
 
GRANIT Cylinder head bolt 210 mm engine Deutz FL912, FL913
GRANIT
Cylinder head bolt 210 mm engine Deutz FL912, FL913
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 68008.
€23,40 €19,34
 
GRANIT Check valve steering valve Deutz-Fahr
9%
GRANIT
Check valve steering valve Deutz-Fahr
Description: for control unit 02379662, 04360637, 04331325, 02940278.
€179,05 €147,98 €163,00 €134,71
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
9%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€402,77 €332,87 €366,65 €303,02
 
LUK Thrust bearing PTO shaft 70 x 110 x 20 mm
1%
LUK
Thrust bearing PTO shaft 70 x 110 x 20 mm
Dimensions (mm): 70 x 110 x 20
€116,29 €96,11 €114,80 €94,88
 
Wheel brake cylinder Ø 28,57 mm, duplex, DOT 4 Deutz-Fahr
9%
Wheel brake cylinder Ø 28,57 mm, duplex, DOT 4 Deutz-Fahr
Hole Ø: 28.57 mm.
€391,11 €323,23 €356,00 €294,21
 
Piston ring set 3 rings Ø 100 mm, 3 mm trapezoidal ring / 2 mm / 3,5 mm
9%
Piston ring set 3 rings Ø 100 mm, 3 mm trapezoidal ring / 2 mm / 3,5 mm
Dimensions: 3 rings, Ø 100 mm, 3 mm (trapezoidal ring) / 2 mm / 3.5 mm.
€42,77 €35,35 €38,90 €32,15
 
Showing 169 - 192 of 192

Parts for your Deutz-Fahr Intrac 2003 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2003. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2003. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2003. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart