Menu
EUR

Tractor parts Deutz-Fahr Intrac 2004

Looking for parts for your Deutz-Fahr Intrac 2004 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

223 parts found for Deutz-Fahr Intrac 2004
Show:
LED main headlight 12/24 V, 142 x 171 x 82 mm, H4 + blade terminal
5%
LED main headlight 12/24 V, 142 x 171 x 82 mm, H4 + blade terminal
Bulb: LED | Nominal voltage (V): 12 / 24 | Operating temperature (°C): -40°C / +...
€133,97 €110,72 €126,75 €104,75
 
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 65 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Case IH, Claas, Deutz-Fahr, Fendt, Mercedes-Benz, Steyr, Zetor
€183,88 €151,97 €167,35 €138,31
 
LUK Clutch kit double clutch Deutz-Fahr D 5006 - D 6907
9%
LUK
Clutch kit double clutch Deutz-Fahr D 5006 - D 6907
Contents: Double clutch 458228000716, clutch plate 458325001216, 2x release bear...
€1.269,58 €1.049,24 €1.155,80 €955,21
 
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
9%
Alternator 14 V / 33 A, form B, flange 56,0 mm, pulley-Ø 68,0 mm
To fit as: Antonio Carraro, Case IH, Deutz-Fahr, Fendt, Goldoni, Holder, Renault...
€197,74 €163,42 €180,00 €148,76
 
GRANIT Replacement key lock number 14610 - 2 pieces
GRANIT
Replacement key lock number 14610 - 2 pieces
Locking number: 14610. Version: Locking no. 14610.
€15,00 €12,40
 
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€299,69 €247,68 €272,80 €225,45
 
GRANIT Piston set, complete Ø 100 mm, combustion chamber 55 mm
9%
GRANIT
Piston set, complete Ø 100 mm, combustion chamber 55 mm
Dimensions: 3 rings, Ø 100 mm, Gudgeon pin Ø 35 x 80 mm, Combustion chamber Ø 55...
€152,40 €125,95 €138,70 €114,63
 
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
9%
Control unit linkage 220 bar, 220 x Ø 57,9 mm Deutz SD60
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/m...
€644,58 €532,71 €586,80 €484,96
 
Clutch kit double clutch DuT 295 Deutz-Fahr
9%
Clutch kit double clutch DuT 295 Deutz-Fahr
Contents: Clutch DuT 295 (445K88915001), organic disc (445S64421141), release be...
€863,71 €713,81 €786,30 €649,83
 
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
4%
PROBOSS
Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustm...
€827,03 €683,50 €792,55 €655,00
 
Stabilus Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
9%
Stabilus
Gas strut door-, for- or rear window 230 N, 502 mm, stroke 198 mm
To fit as: Deutz Door, windscreen or rear screen
€47,75 €39,46 €43,45 €35,91
 
GRANIT Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
9%
GRANIT
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: ...
€54,98 €45,44 €50,00 €41,32
 
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
4%
BOSCH
Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,50 €453,31
 
GRANIT Temperature warning switch 12 V, M10, flat head
9%
GRANIT
Temperature warning switch 12 V, M10, flat head
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C.
€108,59 €89,74 €98,85 €81,69
 
GRANIT Wiper motor with switch 12 V, 135°, M12 x 1
9%
GRANIT
Wiper motor with switch 12 V, 135°, M12 x 1
With integrated switch.
€127,48 €105,36 €116,00 €95,87
 
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
Version: Set of parts.
€19,15 €15,83
 
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€32,10 €26,53
 
GRANIT Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
GRANIT
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, ...
€35,00 €28,93
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.146,48 €1.773,95 €1.697,00 €1.402,48
 
Walterscheid Flange hitch automatic bolt 38 mm, 140 x 80 mm, M17, 2000 kg
21%
Walterscheid
Flange hitch automatic bolt 38 mm, 140 x 80 mm, M17, 2000 kg
Lock: Automatic bolt. Hole pattern: 140 x 80 mm. Load capacity: 2000 kg. D-value...
€1.582,08 €1.307,50 €1.250,80 €1.033,72
 
GRANIT Rocker engine F3L912, F4L912, F6L912, F6L913, BFL913
9%
GRANIT
Rocker engine F3L912, F4L912, F6L912, F6L913, BFL913
Engine types: F3L912, F4L912, F6L912, F6L913, BFL913, FL812.
€103,57 €85,60 €94,25 €77,89
 
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm.
€7,65 €6,32
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.104,81 €913,07 €873,45 €721,86
 
Showing 1 - 24 of 223

Parts for your Deutz-Fahr Intrac 2004 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2004. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2004. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2004. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart