Web Analytics
Deutz-Fahr Intrac 2004 tractor parts - Techniek Totaal
Menu
EUR

Tractor parts Deutz-Fahr Intrac 2004

Looking for parts for your Deutz-Fahr Intrac 2004 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

157 Products
Show:
GRANIT Exhaust valve new version, 3 rings
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€26,35 €21,78 €24,86 €20,55
You save 6%
 
GRANIT Fuel tank cap with ventilation
GRANIT
Filler neck Ø: 106 mm. More
Filler neck Ø: 106 mm.
€22,49 €18,59 €21,22 €17,54
You save 6%
 
GRANIT O-ring
GRANIT
Version: Ø 38 x 3 mm. More
Version: Ø 38 x 3 mm.
€6,41 €5,30 €6,04 €4,99
You save 6%
 
GRANIT Control unit This control valve is used in the tractor for controlling the power lift unit. It can also be used to lift and lower implements continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power. Distur
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 57.9 mm. Menke no.... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€739,92 €611,50 €623,63 €515,40
You save 16%
 
GRANIT Control unit This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed consumer connections A and B. This means extremely low internal leakage rates under high loads. The con
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€718,74 €594,00 €605,78 €500,64
You save 16%
 
GRANIT Gasket thickness 0.2 mm
€0,67 €0,55 €0,64 €0,53
You save 4%
 
Bosch/Rexroth Double pump Anticlockwise rotation
Bosch/Rexroth
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 280/280 bar. Direction of rotation: Anticlockwise. Max. sp... More
Output volume: 16 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Ope...
€1.220,31 €1.008,52 €1.028,53 €850,02
You save 16%
 
GRANIT Ball pin steel
GRANIT
A: M8 mm. E: 13 mm. SW: 22. More
A: M8 mm. E: 13 mm. SW: 22.
€13,61 €11,25 €12,84 €10,61
You save 6%
 
GRANIT Door handle right and left
€106,24 €87,80 €100,26 €82,86
You save 6%
 
GRANIT Sealing ring for piston
GRANIT
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€35,57 €29,40 €33,57 €27,74
You save 6%
 
GRANIT Wiper motor Without attached switch
GRANIT
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C: 28 mm. D: M12 x 1 mm. E: 6 mm. F: M8 mm. G: 50-57 mm. Wiper blade length max.: ... More
Volts: 12. W: konisch 8 x M6 mm. Angle: 135 °. A: 53 mm. B: 34 mm. C:...
€191,53 €158,29 €180,73 €149,36
You save 6%
 
GRANIT Lifting rod for lower link lifting strut top part right
GRANIT
Dimensions: Length = 438, Thread = M22 x 2 mm. More
Dimensions: Length = 438, Thread = M22 x 2 mm.
€131,04 €108,30 €123,66 €102,20
You save 6%
 
GRANIT Push button switch Full beam
GRANIT
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (31- S1- S2- S- +), Dustproof and splashproof, With glass socket bulb ... More
Version: 12/24 V, Blue button, with lock, Ø 30 mm, 5 blade terminals ...
€43,92 €36,30 €40,85 €33,76
You save 7%
 
GRANIT Push button switch Side marker light/sidelight
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€36,05 €29,79 €33,53 €27,71
You save 7%
 
GRANIT Push button switch Work light
GRANIT
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminals 6.3 x 0.8 (31- S1- S- +), Dustproof and splashproof, With glass socket bulb 12... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 4 blade terminal...
€35,84 €29,62 €33,33 €27,55
You save 7%
 
GRANIT Starter 12 V / 2.7 kW - Nominal voltage: 12 V, Nominal power: 2,7 kW, No. of pinion teeth: 9
GRANIT
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teeth: 9 | Holes / PCD (mm): 3 x 10,7 / 127,0 | Spacing flange to flywheel (mm): 28,... More
Nominal voltage (V): 12 | Nominal power (kW): 2,7 | No. of pinion teet...
€235,04 €194,25 €221,80 €183,31
You save 6%
 
VICTOR REINZ Gasket for exhaust manifold
VICTOR REINZ
Engine types: FL912, FL913, BFL913. Motor No: FL912, FL913, BFL913. More
Engine types: FL912, FL913, BFL913. Motor No: FL912, FL913, BFL913.
€6,41 €5,30 €6,04 €4,99
You save 6%
 
VICTOR REINZ Cylinder head gasket
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€8,17 €6,75 €7,71 €6,37
You save 6%
 
GRANIT Sealing ring 91 x 2 mm
€16,03 €13,25 €15,13 €12,50
You save 6%
 
GRANIT Connecting rod Ø 38 / 64 mm, length 216 mm, round
GRANIT
Dimensions: Ø 35 / 64, Length 216, Round mm. More
Dimensions: Ø 35 / 64, Length 216, Round mm.
€129,36 €106,91 €122,08 €100,89
You save 6%
 
GRANIT Pressure pin
GRANIT
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€18,03 €14,90 €17,02 €14,07
You save 6%
 
GRANIT O-ring
GRANIT
Dimensions: 14.5 x 3 mm. More
Dimensions: 14.5 x 3 mm.
€6,78 €5,60 €6,39 €5,28
You save 6%
 
GRANIT Washer For cylinder head bolt
GRANIT
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm. More
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€13,65 €11,28 €12,88 €10,64
You save 6%
 
GRANIT Crankshaft 4-cylinder Standard, Without central gear wheel
GRANIT
Notes: Please follow the installation instructions. Then fill in the test report included and return it to [email protected]. Failure to do s... More
Notes: Please follow the installation instructions. Then fill in the t...
€646,83 €534,57 €545,17 €450,55
You save 16%
 
Showing 97 - 120 of 157

Parts for your Deutz-Fahr Intrac 2004 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Intrac 2004. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Intrac 2004. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Intrac 2004. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Guide width
Connecting pin
Length of gas strut
Newton
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart