Menu
EUR

John Deere 1550 tractor parts & technical data

More than 550 parts fit the John Deere 1550. From lighting and electrics to trailer couplings, everything is gathered here so you can skip the long search.

555 parts found for John Deere 1550
Show:
GRANIT Push button switch hazard lights, button red with bulb, Ø 30 mm
GRANIT
Version: Push button operation, With bulb, red button with warning symbol, Connection cable with 7 blade terminals 6.3 x 0.8 mm, without 30b, Mounting... More
Version: Push button operation, With bulb, red button with warning sym...
€108,77 €89,89 €98,40 €81,32
You save 10%
Ignition switch 12 V, built-in-Ø 26 mm, with 2 keys
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 mm + 6.3 mm. Mounting Ø: 26 mm. Fixing: Fastening nut brass. Nominal voltage: 1... More
Connection: 2x flat terminals 6.3 mm and 2x double flat terminals 9.5 ...
€47,53 €39,28 €43,00 €35,54
You save 10%
Brake light switch oil pressure 1/8" NPT, 2,8 - 6,3 bar, neutral position off
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact. More
Version: Thread 1/8" NPT, 2.8 - 6.3 bar, normally off, make contact.
€22,00 €18,18
GRANIT Plunger pump 23 cm³/rpm. John Deere 940-3650
GRANIT
for tractors with hydraulic steering More
for tractors with hydraulic steering
€927,78 €766,76 €839,40 €693,72
You save 10%
Axial joint 176 mm, Ø 52 mm, M20 x 1,5 / M18 x 1,5
€42,76 €35,34 €40,60 €33,55
You save 5%
Valve head steering valve EW John Deere 830 - 3650
€381,74 €315,49 €362,65 €299,71
You save 5%
GRANIT Seat mechanical suspension, PVC yellow, width 485 mm John Deere
GRANIT
Vorwärts- und Rückwärtseinstellung 150 mm Federweg: 80–100 mm (Paarfeder und hydraulischer Stoßdämpfer) Gewichtsanpassung: 50 - 120 kg Winkelei... More
Vorwärts- und Rückwärtseinstellung 150 mm Federweg: 80–100 mm (Pa...
€142,03 €117,38 €134,90 €111,49
You save 5%
Bearing race hydraulic pump John Deere 1550 - 4960
€120,64 €99,70 €114,60 €94,71
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€586,12 €484,40 €556,80 €460,17
You save 5%
DANA Spicer Synchroniser unit, complete drive shaft for gear shift John Deere
€982,21 €811,74 €933,00 €771,07
You save 5%
Ball joint 284 mm, taper 20 - 22,2 mm, M18 x 1,5 / M18 x 1,5
A: 284 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 284 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tap...
€73,37 €60,64 €69,70 €57,60
You save 5%
GRANIT Track rod 483 mm, 1 1/8" x 12, taper 16 - 19 mm, M14 x 1,5
GRANIT
A: 405 - 750 mm. B: 1 1/8" x 12 mm. C: 16 - 19 mm. G: . D: M14 x 1,5 mm. E: 28 mm. F: 20 mm. More
A: 405 - 750 mm. B: 1 1/8" x 12 mm. C: 16 - 19 mm. G: . D: M14 x 1,5 m...
€168,79 €139,50 €160,35 €132,52
You save 5%
Bush camshaft Ø 55,88 x 59,87 x 38,9 mm John Deere
€45,15 €37,31 €42,85 €35,41
You save 5%
Valve set for filter head
Description: For filter head. More
Description: For filter head.
€25,85 €21,36
Water pump impeller Ø 94 mm, with gasket John Deere, Renault
Dimensions: Impeller Ø 94 mm. Version: With gasket. More
Dimensions: Impeller Ø 94 mm. Version: With gasket.
€134,84 €111,44 €128,00 €105,79
You save 5%
Set of parts feed pump John Deere engine 3164-6359
€50,36 €41,62 €47,80 €39,50
You save 5%
Fuel line 108 mm John Deere
Dimensions: Length 108 mm. More
Dimensions: Length 108 mm.
€22,90 €18,93
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, fabric
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 480 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.090,33 €901,10 €1.035,80 €856,03
You save 5%
GRANIT Shim hood John Deere
€1,27 €1,05
GRANIT Start switch 12 V, Ø 13,5 mm, without push button
GRANIT
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mounting opening Ø 13.5 mm / 3 mm, control button 50712034. More
Version: 12 V with blade terminal, 0: off, 1: preheat, 2: start, Mount...
€59,15 €48,88 €53,50 €44,21
You save 10%
Showing 49 - 72 of 555

John Deere 1550 parts

More than 550 parts fit the John Deere 1550, enough to take care of a full service in one go, from the clutch to the headlights. Brands include GRANIT, HELLA, MAHLE, LUK and Wabco.

Clutch

For the clutch there are clutch plates with a torsion damper and single clutch pressure plates. Replace the plate and pressure plate together where you can. The tractor has to be split either way, and a new plate running against a worn pressure plate will not last. While it is apart, inspect the flywheel too: scoring or blue heat marks should be skimmed out before the new plate goes in.

Engine, cooling and electrics

  • Water pumps, plus seals for the lift pump and the coolant circuit
  • Exhaust gaskets and a lift housing gasket
  • O-rings, including one for the brake master cylinder
  • Starter motors and alternators
  • Left and right headlights

Coolant seeping from the weep hole on the water pump means the shaft seal has gone and the pump will not last much longer. Replace it as a unit and clean the gasket faces on the block thoroughly. Look over the belt and hoses at the same time, then refill with fresh coolant. Warm the engine up with the heater valve open and top up as the level drops. Headlights are available separately for left and right, so only the damaged side needs replacing.

Linkage, steering and air brakes

Lift arm bushes and washers take the play out of the rear linkage. On the steering side you can replace track rods and ball joints. Connector heads cover the air brake supply to a trailer, and gas struts hold the cab door or window where they should.

When changing a track rod, measure the old one first so the toe setting stays roughly where it was, then have the alignment checked, since wrong toe wears front tyres quickly.

Making sure it fits

First confirm on the data plate that the tractor is a 1550. Some parts are made for a group of John Deere models, such as a lift housing gasket that fits from the 820 up to the 3650 and a pressure plate for the 840 up to the 2650. The product details show this. Also compare the number on the old part, especially for the clutch, where the spline count and plate diameter have to match.

The 1550 is part of the 50 series. Two other tractors from that series have pages of their own:

For any other John Deere you look after, go to the overview of John Deere parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart