Menu
EUR

Deutz-Fahr Agrofarm 100 tractor parts & technical data

For your Deutz-Fahr Agrofarm 100 you can choose from more than 150 parts that fit. Trailer couplings, lighting and electrics are the best represented groups.

142 parts found for Deutz-Fahr Agrofarm 100
Show:
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
You save 21%
MAHLE Aircon compressor 12 V, pulley Ø 115 mm, 2 grooves, 100 ccm oil
MAHLE
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage (V): 12 | Pulley Ø (mm): 115 | Additional information: with seal rin... More
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nomin...
€503,62 €416,21 €299,75 €247,73
You save 40%
Scharmüller Adaptor flange 110 x 100 mm, 36 teeth, D 68 kN, 383 mm, M16
Scharmüller
Assembly notes: Mirror-image serration | D-value (kN): 68 | Colour: Black | Load capacity (kg): 2000 | Number of teeth: 36 | No. of holes: 6 | Length ... More
Assembly notes: Mirror-image serration | D-value (kN): 68 | Colour: Bl...
€986,95 €815,66
LUK Thrust bearing 55 x 90,5 x 22 mm
LUK
Dimensions (mm): 55 x 90.5 x 22 More
Dimensions (mm): 55 x 90.5 x 22
€184,17 €152,21 €174,95 €144,59
You save 5%
FEBI Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410
FEBI
Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410 More
Thermostat Deutz Agrofarm 85, 100, Agrofarm (Tier 3) 410
€37,35 €30,87 €25,85 €21,36
You save 31%
FEBI Clutch release bearing Deutz Agroclimber 105, Agroclimber (Tier 3) 410
FEBI
Clutch release bearing Deutz Agroclimber 105, Agroclimber (Tier 3) 410 More
Clutch release bearing Deutz Agroclimber 105, Agroclimber (Tier 3) 410
€74,96 €61,95 €49,46 €40,88
You save 34%
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 mm. More
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper...
€36,00 €29,75
Scharmüller Support plates ball 80, 1142 x 240 mm, 4000 kg
Scharmüller
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 mm. Width: 240 mm. Thickness: 60 mm. Number of heart pins: 2. Heart pin Ø: 32 m... More
Lock: ball 80. Load capacity: 4000 kg. D-value: 89,3 kN. Length: 1142 ...
€2.220,60 €1.835,21
Thermostat Ø 67 mm, 87 °C, Deutz-Fahr, Fendt, Lamborghini
Ø: 67 mm. Temperature: 87 °C. More
Ø: 67 mm. Temperature: 87 °C.
€94,59 €78,17 €89,85 €74,26
You save 5%
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
You save 5%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,16 €36,50 €41,95 €34,67
You save 5%
MAHLE Aircon compressor 12 V, pulley Ø 150 mm, 2 grooves
MAHLE
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 175 | No. of grooves: 2 More
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable ...
€740,70 €612,15 €440,85 €364,34
You save 40%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€320,94 €265,24 €200,55 €165,74
You save 38%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€185,86 €153,60 €176,55 €145,91
You save 5%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
Cylinder hydraulic steering
€765,40 €632,56 €727,10 €600,91
You save 5%
Optibelt V-belt air conditioning Deutz-Fahr Agrofarm 80-430
€60,44 €49,95 €57,40 €47,44
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€87,89 €72,64 €83,45 €68,97
You save 5%
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Showing 49 - 72 of 142

Deutz-Fahr Agrofarm 100 parts and what they cover

The Agrofarm 100 is an everyday tractor on a mixed farm, used for feeding, mowing, some haulage and the odd loader job. This page brings together more than 150 parts for it, made by GRANIT, ROCKINGER, Cobo, Walterscheid and GRAMMER.

Engine, air conditioning and starting

Spend a summer day in the cab and you notice straight away when the air conditioning is struggling. For the Agrofarm 100 there are air conditioning compressors and the V-belts that drive them. On the engine you will find valve cover gaskets, front gaskets, crankshaft seals and seal kits. If the tractor turns over slowly or only clicks, there are starter motors for this model. The hydraulics are covered with seals and the clutch with thrust bearings.

A tip on the valve cover gasket: tighten the cover bolts in a cross pattern and with a feel for it, not as hard as you can. An overtightened cover distorts, and then a new gasket leaks just like the old one. Make the faces of the head and cover clean, dry and grease-less, and check the cover is still straight by laying it on a flat surface. After a few hours of running, take another look to see that everything stays dry.

Cab, visibility and hitching

  • Gas struts, for example for the roof window
  • Work lamps, including a recessed flood beam
  • Cab mirrors
  • A GRAMMER Compacto seat with mechanical suspension
  • Automatic drawbars and a Piton Fix pin

With a mechanically suspended seat like the Compacto, take a minute after fitting to set the suspension to your own weight. Too soft and it bottoms out over every bump, too firm and you feel every rut of the field in your back. A little grease on the slide rails now and then keeps it from rattling.

Matching the part to your Agrofarm

There are several models in the Agrofarm line, so start by checking the type plate shows the 100. If a number is still visible on the old part, on the edge of a gasket or on the starter motor housing for instance, it gives you something solid to compare with the details on the product. With a starter motor, count the teeth on the pinion and note the direction of rotation too. For a V-belt, keep the old one as a reference.

If a Deutz-Fahr Agrofarm 85 works on the same farm, its parts are on a separate page, so you can see straight away what belongs to that tractor. The whole brand, from older Deutz tractors to recent models, is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart