Menu
EUR

Deutz-Fahr Agrofarm 100 tractor parts & technical data

For your Deutz-Fahr Agrofarm 100 you can choose from more than 150 parts that fit. Trailer couplings, lighting and electrics are the best represented groups.

142 parts found for Deutz-Fahr Agrofarm 100
Show:
GRANIT Hand brake cable SAME, Hürlimann, Deutz-Fahr, Lamborghini
€96,56 €79,80 €91,70 €75,79
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm. More
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 m...
€23,25 €19,21
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.231,99 €1.018,17 €990,51 €818,60
You save 20%
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof ... More
Version: 48 V switching voltage, Yellow button, make contact, Total bu...
€37,39 €30,90 €35,50 €29,34
You save 5%
Cobo Lamp glass right
Cobo
Installation location: Right. More
Installation location: Right.
€31,30 €25,87
Cobo Work lamp H3 55 / 70 W, 12 V, 158 x 86 x 68 mm, screwed M10
Cobo
Bulb: H3. Form: Square. Material: Housing: plastic. Dimensions W x H x D: 158 x 86 x 68 mm. Nominal voltage: 12 V. Power consumption: 55 / 70 W. Mount... More
Bulb: H3. Form: Square. Material: Housing: plastic. Dimensions W x H x...
€60,44 €49,95 €57,40 €47,44
You save 5%
Cobo Rear light right 185 x 85 x 72 mm, 12 V, hole spacing 80 mm
Cobo
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Plug connection M42 x 1.5. Width: 185 mm. Form: Rectangular. Height: 85 mm. Hole spacing: 80 mm. Dim... More
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Plug connection M42 ...
€71,77 €59,31 €64,90 €53,64
You save 10%
GRANIT Lamp glass right, left
GRANIT
Installation location: Right, left. More
Installation location: Right, left.
€38,80 €32,07
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
You save 38%
Pressure retention valve Deutz-Fahr, Fendt
€34,21 €28,27 €32,45 €26,82
You save 5%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.078,71 €891,50 €1.024,75 €846,90
You save 5%
Spring fender right SAME, Hürlimann, Deutz-Fahr, Lamborghini
€85,30 €70,50 €81,00 €66,94
You save 5%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.832,06 €1.514,10 €1.439,45 €1.189,63
You save 21%
Seal kit Deutz-Fahr, Lamborghini, Hürlimann, Same
€81,75 €67,56 €77,65 €64,17
You save 5%
Optibelt V-belt air conditioning Deutz, Deutz-Fahr Agrofarm 100-430
€63,46 €52,45 €57,40 €47,44
You save 10%
MANN-FILTER Fuel filter WK731
€10,25 €8,47
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
You save 21%
MAHLE Aircon compressor 12 V, pulley Ø 115 mm, 2 grooves, 100 ccm oil
MAHLE
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage (V): 12 | Pulley Ø (mm): 115 | Additional information: with seal rin... More
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nomin...
€503,62 €416,21 €299,75 €247,73
You save 40%
Showing 25 - 48 of 142

Deutz-Fahr Agrofarm 100 parts and what they cover

The Agrofarm 100 is an everyday tractor on a mixed farm, used for feeding, mowing, some haulage and the odd loader job. This page brings together more than 150 parts for it, made by GRANIT, ROCKINGER, Cobo, Walterscheid and GRAMMER.

Engine, air conditioning and starting

Spend a summer day in the cab and you notice straight away when the air conditioning is struggling. For the Agrofarm 100 there are air conditioning compressors and the V-belts that drive them. On the engine you will find valve cover gaskets, front gaskets, crankshaft seals and seal kits. If the tractor turns over slowly or only clicks, there are starter motors for this model. The hydraulics are covered with seals and the clutch with thrust bearings.

A tip on the valve cover gasket: tighten the cover bolts in a cross pattern and with a feel for it, not as hard as you can. An overtightened cover distorts, and then a new gasket leaks just like the old one. Make the faces of the head and cover clean, dry and grease-less, and check the cover is still straight by laying it on a flat surface. After a few hours of running, take another look to see that everything stays dry.

Cab, visibility and hitching

  • Gas struts, for example for the roof window
  • Work lamps, including a recessed flood beam
  • Cab mirrors
  • A GRAMMER Compacto seat with mechanical suspension
  • Automatic drawbars and a Piton Fix pin

With a mechanically suspended seat like the Compacto, take a minute after fitting to set the suspension to your own weight. Too soft and it bottoms out over every bump, too firm and you feel every rut of the field in your back. A little grease on the slide rails now and then keeps it from rattling.

Matching the part to your Agrofarm

There are several models in the Agrofarm line, so start by checking the type plate shows the 100. If a number is still visible on the old part, on the edge of a gasket or on the starter motor housing for instance, it gives you something solid to compare with the details on the product. With a starter motor, count the teeth on the pinion and note the direction of rotation too. For a V-belt, keep the old one as a reference.

If a Deutz-Fahr Agrofarm 85 works on the same farm, its parts are on a separate page, so you can see straight away what belongs to that tractor. The whole brand, from older Deutz tractors to recent models, is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart