Menu
EUR

Deutz-Fahr Agroplus 100 tractor parts & technical data

Electrics, lighting and trailer couplings for the Deutz-Fahr Agroplus 100 are grouped on this page. In total there are more than 160 parts that fit this model.

161 parts found for Deutz-Fahr Agroplus 100
Show:
Stop solenoid switch Deutz-Fahr
€408,62 €337,70 €388,15 €320,79
You save 5%
GRANIT Cylinder head gasket 1,54 mm thick, 1 bore Deutz-Fahr
€152,76 €126,25 €145,10 €119,92
You save 5%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,16 €36,50 €41,95 €34,67
You save 5%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Cobo Headlight left / right 12V60/55W / H4, built-in, screw fixing
Cobo
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped beam, full beam. Additional in... More
Bulb: 12V60/55W / H4. Installation location: Left, right. Nominal volt...
€95,95 €79,30 €86,80 €71,74
You save 10%
GRANIT External plate 1,4 mm, inner 88 mm, outer 137,8 mm, 6 teeth
GRANIT
Version: Thickness: 1.4 mm Inner: 88 mm Outer: 137.8 mm 6 teeth More
Version: Thickness: 1.4 mm Inner: 88 mm Outer: 137.8 mm 6 teeth
€22,80 €18,84
MAHLE Aircon compressor 12 V, pulley Ø 150 mm, 2 grooves
MAHLE
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Refrigerant: R 134a | Oil quantity (ccm): 175 | No. of grooves: 2 More
Fixing: EM | Pulley Ø (mm): 150 | Nominal voltage (V): 12 | Suitable ...
€740,70 €612,15 €440,85 €364,34
You save 40%
Clutch plate single clutch flywheel 34,5 mm Deutz-Fahr
Flywheel dimension (mm): 34,5 (tief) | Additional information: Made in Germany More
Flywheel dimension (mm): 34,5 (tief) | Additional information: Made in...
€443,91 €366,87 €401,60 €331,90
You save 10%
GRANIT Clutch plate single clutch Deutz-Fahr, Lamborghini, Same
GRANIT
Additional information: Made in Germany More
Additional information: Made in Germany
€321,62 €265,80 €305,50 €252,48
You save 5%
LUK Clutch plate 310TSFN 36 x 40 mm, 24 splines, organic
LUK
Material specifications: Organic clutch lining | Dimensions (mm): 36 x 40 24 grooves More
Material specifications: Organic clutch lining | Dimensions (mm): 36 x...
€303,06 €250,46 €287,90 €237,93
You save 5%
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dust-tight, with fan | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Cha... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional info...
€320,94 €265,24 €200,55 €165,74
You save 38%
Alternator 14 V / 95 A, flange 56 mm
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | Pulley Ø (mm): - | Form: B | Flange size (mm): 56,0 | Nominal values (V / A): 1... More
Mounting L / d / R (mm): 56,0 / 8,3 / 86,0 | Pulley spacing (mm): - | ...
€185,86 €153,60 €176,55 €145,91
You save 5%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€571,00 €471,90 €459,00 €379,34
You save 20%
GRANIT Oil cooler Deutz-Fahr Agrotron 80-150
€1.098,43 €907,79 €1.043,50 €862,40
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT High-pressure pump Fendt, Deutz-Fahr
€523,22 €432,41 €497,00 €410,74
You save 5%
Injection line Fendt, Deutz-Fahr
€52,70 €43,55 €50,00 €41,32
You save 5%
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65-88, 70-88, 80-88, 60-90, 65-90, 70-90, 80-90, 90-90, 100-90, 110-90, 115-90, 13... More
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65...
€26,45 €21,86
Showing 49 - 72 of 161

Deutz-Fahr Agroplus 100 parts for engine work and clutch jobs

When an Agroplus 100 comes into the workshop for an engine overhaul or a new clutch, you want every part on the bench before the first bolt comes out. This page lists more than 160 parts that fit the Deutz-Fahr Agroplus 100, made by GRANIT, Cobo, MAHLE, VICTOR REINZ and GRAMMER.

What is available

  • Engine sealing: cylinder head gaskets, valve cover gaskets, front cover gaskets, seal kits and hydraulic pump seals
  • Damping: a vibration damper
  • Clutch: clutch plates
  • Electrics: starter motors, gear reduction starters and alternators
  • Fuel: fuel filters
  • Cab and lights: aircon compressors, roof window gas struts, mirrors and lamp glass

Head gasket thickness

Head gaskets for these engines come in more than one thickness, and the right one depends on how far the pistons stand proud of the block. Check the old gasket for its marking, usually holes or notches, and use the same thickness unless the block, pistons or crankshaft have been machined. In that case, measure piston protrusion again. Replace stretch bolts and follow the tightening sequence from the engine maker. Check the head and block for distortion with a straight edge before the new gasket goes on.

Clutch and fuel tips

Fitting a new clutch plate is the moment to renew the release bearing too and to inspect the flywheel for scoring and blue heat marks. After changing a fuel filter, bleed the system with the hand primer until no more air bubbles appear, otherwise the engine will be reluctant to start.

Starter and lights

A gear reduction starter uses a small, fast spinning motor behind a reduction gear, so it delivers plenty of torque and turns the engine over briskly even on a cold morning. When swapping, compare the mounting and the position of the terminals with your old starter. If a lamp glass has cracked, replace just the glass. That keeps moisture away from the reflector and saves buying a complete lamp.

Choosing the right part

Take the model and serial number from the rating plate, and for engine parts also note the engine designation on the block. VICTOR REINZ gaskets and electrical parts normally carry a reference number to compare with the product description.

Other models in the Agroplus range have their own pages, the Deutz-Fahr Agroplus 87 and the Deutz-Fahr Agroplus 95, each showing what fits that tractor. The rest of the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart