Menu
EUR

Deutz-Fahr Agroplus 100 tractor parts & technical data

Electrics, lighting and trailer couplings for the Deutz-Fahr Agroplus 100 are grouped on this page. In total there are more than 160 parts that fit this model.

161 parts found for Deutz-Fahr Agroplus 100
Show:
GRANIT Filter dryer 267 mm, #6 3/8 o-ring, connection thread M/F
5%
GRANIT
Filter dryer 267 mm, #6 3/8 o-ring, connection thread M/F
Weight (g): 1200 | Connection thread: M/F | Thread: #6 3/8 O-ring | Length (mm):...
€48,47 €40,06 €46,00 €38,02
 
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
5%
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: #6 3/8 O-r...
€46,84 €38,71 €44,45 €36,74
 
LUK Single clutch 310TBFR Deutz-Fahr, Lamborghini, Same
5%
LUK
Single clutch 310TBFR Deutz-Fahr, Lamborghini, Same
€488,04 €403,34 €463,60 €383,14
 
LUK Single clutch 310TBFR flywheel flat Deutz-Fahr, Lamborghini, Same
5%
LUK
Single clutch 310TBFR flywheel flat Deutz-Fahr, Lamborghini, Same
Flywheel design: Flat
€393,20 €324,96 €373,50 €308,68
 
GRANIT Thrust bearing driving clutch 55 x 91,5 x 25 mm
5%
GRANIT
Thrust bearing driving clutch 55 x 91,5 x 25 mm
Dimensions (mm): 55 x 91.5 x 25
€84,24 €69,62 €80,00 €66,12
 
Elring Seal engine BF4M1012 - BF6M1012EC Deutz-Fahr
Elring
Seal engine BF4M1012 - BF6M1012EC Deutz-Fahr
€11,75 €9,71
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
VICTOR REINZ Air receiver gasket Deutz-Fahr Agroplus, Agrotron
VICTOR REINZ
Air receiver gasket Deutz-Fahr Agroplus, Agrotron
€4,46 €3,69
 
VICTOR REINZ Exhaust manifold gasket
VICTOR REINZ
Exhaust manifold gasket
€6,30 €5,21
 
Optibelt V-belt engine cooling Fendt, Deutz-Fahr
Optibelt
V-belt engine cooling Fendt, Deutz-Fahr
€30,30 €25,04
 
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
5%
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
 
GRANIT Valve cover gasket engine BF6M1012 Deutz-Fahr, Linde
5%
GRANIT
Valve cover gasket engine BF6M1012 Deutz-Fahr, Linde
€50,92 €42,08 €48,35 €39,96
 
GRANIT Piston set complete Ø 94 mm, combustion chamber 49,5 mm
5%
GRANIT
Piston set complete Ø 94 mm, combustion chamber 49,5 mm
Dimensions: 3 rings, Ø 94 mm, gudgeon pin Ø 34 x 78 mm, combustion chamber Ø 49....
€257,84 €213,09 €244,90 €202,40
 
Gas strut rear window 200 N, 585 mm
Gas strut rear window 200 N, 585 mm
Newtons: 200. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€32,10 €26,53
 
Cylinder Same, Hürlimann, Deutz-Fahr, Lamborghini
5%
Cylinder Same, Hürlimann, Deutz-Fahr, Lamborghini
€319,55 €264,09 €303,55 €250,87
 
Seal kit Lamborghini, Deutz-Fahr
5%
Seal kit Lamborghini, Deutz-Fahr
€61,95 €51,20 €58,85 €48,64
 
Clutch plate 350 36,5 x 41 mm, 24 splines Deutz-Fahr Agroplus 100
10%
Clutch plate 350 36,5 x 41 mm, 24 splines Deutz-Fahr Agroplus 100
Dimensions (mm): 36.5 x 41, 24 grooves | Additional information: Made in Germany
€474,40 €392,07 €429,20 €354,71
 
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
23%
HELLA
Alternator CA1433IR 14 V / 95 A without belt pulley
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Wit...
€507,13 €419,12 €388,30 €320,91
 
Showing 73 - 96 of 161

Deutz-Fahr Agroplus 100 parts for engine work and clutch jobs

When an Agroplus 100 comes into the workshop for an engine overhaul or a new clutch, you want every part on the bench before the first bolt comes out. This page lists more than 160 parts that fit the Deutz-Fahr Agroplus 100, made by GRANIT, Cobo, MAHLE, VICTOR REINZ and GRAMMER.

What is available

  • Engine sealing: cylinder head gaskets, valve cover gaskets, front cover gaskets, seal kits and hydraulic pump seals
  • Damping: a vibration damper
  • Clutch: clutch plates
  • Electrics: starter motors, gear reduction starters and alternators
  • Fuel: fuel filters
  • Cab and lights: aircon compressors, roof window gas struts, mirrors and lamp glass

Head gasket thickness

Head gaskets for these engines come in more than one thickness, and the right one depends on how far the pistons stand proud of the block. Check the old gasket for its marking, usually holes or notches, and use the same thickness unless the block, pistons or crankshaft have been machined. In that case, measure piston protrusion again. Replace stretch bolts and follow the tightening sequence from the engine maker. Check the head and block for distortion with a straight edge before the new gasket goes on.

Clutch and fuel tips

Fitting a new clutch plate is the moment to renew the release bearing too and to inspect the flywheel for scoring and blue heat marks. After changing a fuel filter, bleed the system with the hand primer until no more air bubbles appear, otherwise the engine will be reluctant to start.

Starter and lights

A gear reduction starter uses a small, fast spinning motor behind a reduction gear, so it delivers plenty of torque and turns the engine over briskly even on a cold morning. When swapping, compare the mounting and the position of the terminals with your old starter. If a lamp glass has cracked, replace just the glass. That keeps moisture away from the reflector and saves buying a complete lamp.

Choosing the right part

Take the model and serial number from the rating plate, and for engine parts also note the engine designation on the block. VICTOR REINZ gaskets and electrical parts normally carry a reference number to compare with the product description.

Other models in the Agroplus range have their own pages, the Deutz-Fahr Agroplus 87 and the Deutz-Fahr Agroplus 95, each showing what fits that tractor. The rest of the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart