Menu
EUR

Deutz-Fahr Agroplus 100 tractor parts & technical data

Electrics, lighting and trailer couplings for the Deutz-Fahr Agroplus 100 are grouped on this page. In total there are more than 160 parts that fit this model.

161 parts found for Deutz-Fahr Agroplus 100
Show:
Seal kit Deutz-Fahr, Lamborghini, Hürlimann, Same
5%
Seal kit Deutz-Fahr, Lamborghini, Hürlimann, Same
€81,75 €67,56 €77,65 €64,17
 
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
5%
Push button switch PTO shaft 48 V link voltage, button yellow, Ø 30 mm
Version: 48 V switching voltage, Yellow button, make contact, Total button trave...
€37,39 €30,90 €35,50 €29,34
 
Cobo Lamp glass right
Cobo
Lamp glass right
Installation location: Right.
€31,30 €25,87
 
Cobo Work lamp H3 55 / 70 W, 12 V, 158 x 86 x 68 mm, screwed M10
5%
Cobo
Work lamp H3 55 / 70 W, 12 V, 158 x 86 x 68 mm, screwed M10
Bulb: H3. Form: Square. Material: Housing: plastic. Dimensions W x H x D: 158 x ...
€60,44 €49,95 €57,40 €47,44
 
Cobo Rear light right 185 x 85 x 72 mm, 12 V, hole spacing 80 mm
10%
Cobo
Rear light right 185 x 85 x 72 mm, 12 V, hole spacing 80 mm
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Plug connection M42 x 1.5. Wid...
€71,77 €59,31 €64,90 €53,64
 
GRANIT Lamp glass right, left
GRANIT
Lamp glass right, left
Installation location: Right, left.
€38,80 €32,07
 
GRAMMER Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
GRAMMER
Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
Comfort seat with air suspension and 12V compressor. Height adjustment 60 mm con...
€1.120,00 €925,62
 
LED main headlight round 144,5 x 89,3 mm, H4, 12/24 V
5%
LED main headlight round 144,5 x 89,3 mm, H4, 12/24 V
Protection class: IP6K9K, IP67 | Outer Ø (mm): 144,5 | Light function: Full beam...
€129,59 €107,10 €123,10 €101,74
 
GRANIT Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
GRANIT
Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,65 €3,02
 
Piston ring set 3 rings Deutz-Fahr
5%
Piston ring set 3 rings Deutz-Fahr
€47,36 €39,14 €44,95 €37,15
 
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm.
€23,25 €19,21
 
Pressure retention valve Deutz-Fahr, Fendt
5%
Pressure retention valve Deutz-Fahr, Fendt
€34,21 €28,27 €32,45 €26,82
 
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
5%
GRAMMER
Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Option...
€1.486,67 €1.228,65 €1.412,30 €1.167,19
 
MANN-FILTER Fuel filter WK731
MANN-FILTER
Fuel filter WK731
€10,25 €8,47
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
 
MAHLE Aircon compressor 12 V, pulley Ø 115 mm, 2 grooves, 100 ccm oil
40%
MAHLE
Aircon compressor 12 V, pulley Ø 115 mm, 2 grooves, 100 ccm oil
Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage...
€503,62 €416,21 €299,75 €247,73
 
LUK Thrust bearing 55 x 90,5 x 22 mm
5%
LUK
Thrust bearing 55 x 90,5 x 22 mm
Dimensions (mm): 55 x 90.5 x 22
€184,17 €152,21 €174,95 €144,59
 
LUK Torsion damper Ø 263 mm, 24 teeth, tooth profile 46X50
5%
LUK
Torsion damper Ø 263 mm, 24 teeth, tooth profile 46X50
Tooth profile: 46x50 | Number of teeth: 24 | Diameter (mm): 263
€382,14 €315,82 €363,00 €300,00
 
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
Ball joint 105 mm, taper 18 - 20 mm, M16 x 1,5, M24 x 1,5
A: 105 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20 mm. Taper: 18 - 20 ...
€36,00 €29,75
 
Showing 25 - 48 of 161

Deutz-Fahr Agroplus 100 parts for engine work and clutch jobs

When an Agroplus 100 comes into the workshop for an engine overhaul or a new clutch, you want every part on the bench before the first bolt comes out. This page lists more than 160 parts that fit the Deutz-Fahr Agroplus 100, made by GRANIT, Cobo, MAHLE, VICTOR REINZ and GRAMMER.

What is available

  • Engine sealing: cylinder head gaskets, valve cover gaskets, front cover gaskets, seal kits and hydraulic pump seals
  • Damping: a vibration damper
  • Clutch: clutch plates
  • Electrics: starter motors, gear reduction starters and alternators
  • Fuel: fuel filters
  • Cab and lights: aircon compressors, roof window gas struts, mirrors and lamp glass

Head gasket thickness

Head gaskets for these engines come in more than one thickness, and the right one depends on how far the pistons stand proud of the block. Check the old gasket for its marking, usually holes or notches, and use the same thickness unless the block, pistons or crankshaft have been machined. In that case, measure piston protrusion again. Replace stretch bolts and follow the tightening sequence from the engine maker. Check the head and block for distortion with a straight edge before the new gasket goes on.

Clutch and fuel tips

Fitting a new clutch plate is the moment to renew the release bearing too and to inspect the flywheel for scoring and blue heat marks. After changing a fuel filter, bleed the system with the hand primer until no more air bubbles appear, otherwise the engine will be reluctant to start.

Starter and lights

A gear reduction starter uses a small, fast spinning motor behind a reduction gear, so it delivers plenty of torque and turns the engine over briskly even on a cold morning. When swapping, compare the mounting and the position of the terminals with your old starter. If a lamp glass has cracked, replace just the glass. That keeps moisture away from the reflector and saves buying a complete lamp.

Choosing the right part

Take the model and serial number from the rating plate, and for engine parts also note the engine designation on the block. VICTOR REINZ gaskets and electrical parts normally carry a reference number to compare with the product description.

Other models in the Agroplus range have their own pages, the Deutz-Fahr Agroplus 87 and the Deutz-Fahr Agroplus 95, each showing what fits that tractor. The rest of the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart