Web Analytics
Deutz-Fahr Agroplus 70 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr Agroplus 70

Looking for parts for your Deutz-Fahr Agroplus 70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

182 parts found for Deutz-Fahr Agroplus 70
Show:
Bosch/Rexroth Hydraulic pump 14 cm³ anticlockwise, spline-as B 17 x 14, 9 splines
Bosch/Rexroth
Line connection suction side: Ø 40 mm, 4-hole, M6 | Bosch no.: 0510515338 | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Min. speed (1/min.): 500... More
Line connection suction side: Ø 40 mm, 4-hole, M6 | Bosch no.: 051051...
€563,49 €465,69
GRANIT Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
GRANIT
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth More
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth
€30,41 €25,13
GRANIT Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm, PAD horizontal
GRANIT
Pulley Ø (mm): 115 | Connection: PAD horizontal | Suitable oil: PAG 46 | No. of grooves: 2 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quan... More
Pulley Ø (mm): 115 | Connection: PAD horizontal | Suitable oil: PAG 4...
€275,77 €227,91
LUK Clutch kit flywheel flat Deutz-Fahr Agrolux 60 - 77
LUK
Contents: Pressure plate 458131022810, clutch plate 458331017911 More
Contents: Pressure plate 458131022810, clutch plate 458331017911
€588,06 €486,00 €574,94 €475,16
You save 2%
LUK Clutch plate 310TDCN 36 x 40 mm, 24 splines, sintered
LUK
Dimensions (mm): 36 x 40 24 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 36 x 40 24 grooves | Material specifications: Sintere...
€314,91 €260,26 €307,89 €254,45
You save 2%
GRANIT Clutch plate 310, 36 x 40 mm, 24 splines
GRANIT
Dimensions (mm): 36 x 40, 24 grooves | Additional information: Made in Germany More
Dimensions (mm): 36 x 40, 24 grooves | Additional information: Made in...
€240,11 €198,44
MAHLE Alternator 14 V, 85 A, flange 56 mm, mounting angle l 30
MAHLE
Belt width (mm) / type: - | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 85 | Mounting hole Ø / R (mm): 8,2 / 86,0 | Installation angle (°... More
Belt width (mm) / type: - | Nominal voltage (V): 14 | Nominal values (...
€416,78 €344,45 €313,44 €259,04
You save 25%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 11 teeth, mounting Ø 82,5 mm
€484,69 €400,57 €301,14 €248,88
You save 38%
MAHLE Starter motor 12 V, 2,7 kW, 11 teeth, clockwise, mounting Ø 82,5 mm
€467,60 €386,45 €290,53 €240,11
You save 38%
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
€7,67 €6,34 €7,52 €6,21
You save 2%
GRANIT Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3 mm
GRANIT
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3 mm / 3 mm. More
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3 mm / 3 ...
€100,19 €82,80 €95,18 €78,66
You save 5%
GRANIT Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
GRANIT
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€10,25 €8,47 €10,05 €8,31
You save 2%
GRANIT Shim liner Top 1,25 mm Fendt, Deutz-Fahr
€9,74 €8,05 €9,55 €7,89
You save 2%
GRANIT Gasket crankshaft rear Fendt, Deutz-Fahr
€2,21 €1,83 €2,17 €1,79
You save 2%
GRANIT Thrust washer for thickness 2,94 mm Deutz-Fahr
GRANIT
Engine types: FL912. Dimensions: Thickness 2.94 mm. More
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€14,50 €11,98 €14,21 €11,74
You save 2%
GRANIT Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3,5 mm
GRANIT
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3.00 mm / 3.5 mm. More
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3.00 mm /...
€86,50 €71,49 €84,77 €70,06
You save 2%
GRANIT Foot throttle cable 955 mm, 760 mm Deutz-Fahr Agroplus 60-80
GRANIT
A: 955 mm. B: 760 mm. More
A: 955 mm. B: 760 mm.
€162,75 €134,50 €154,61 €127,78
You save 5%
GRANIT Oil sump gasket 4 cylinder engine F4L913 Fendt, Deutz-Fahr
€3,84 €3,17 €3,76 €3,11
You save 2%
GRANIT Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
GRANIT
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm. More
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 ...
€2,75 €2,27 €2,70 €2,23
You save 2%
GRANIT Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
GRANIT
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm. More
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€17,73 €14,65 €17,38 €14,36
You save 2%
GRANIT Valve seat ring outlet valve Fendt, Deutz-Fahr
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€21,76 €17,98 €21,32 €17,62
You save 2%
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., spline-as B 17 x 14, 9 splines, left
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. s... More
Output volume: 19 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines...
€668,77 €552,70 €568,45 €469,79
You save 15%
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
GRANIT
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm. d1: 8 mm. d2: 18 mm. Stroke: 180,5 mm. Connection 1: Angle joint with... More
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm...
€44,17 €36,50 €43,29 €35,78
You save 2%
GRANIT Gas strut door screen 200 N, 265 mm, stroke 94 mm Deutz-Fahr
GRANIT
suitable for: Türscheibe. Newtons: 200. A: 265 mm. B: 147 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 94 mm. To fit: Door window. More
suitable for: Türscheibe. Newtons: 200. A: 265 mm. B: 147 mm. C: 10 m...
€64,44 €53,26 €63,15 €52,19
You save 2%
Showing 145 - 168 of 182

Parts for your Deutz-Fahr Agroplus 70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Agroplus 70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Agroplus 70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Agroplus 70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart