Web Analytics
Deutz-Fahr Agroplus 70 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr Agroplus 70

Looking for parts for your Deutz-Fahr Agroplus 70 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

182 parts found for Deutz-Fahr Agroplus 70
Show:
Bosch/Rexroth Hydraulic pump 14 cm³ anticlockwise, spline-as B 17 x 14, 9 splines
Bosch/Rexroth
Hydraulic pump 14 cm³ anticlockwise, spline-as B 17 x 14, 9 splines
Line connection suction side: Ø 40 mm, 4-hole, M6 | Bosch no.: 0510515338 | Adap...
€563,49 €465,69
 
GRANIT Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
GRANIT
Internal plate PTO shaft 2,5 mm, 97,3 mm, 124 mm, 48 teeth
Version: Thickness: 2.5 mm Inner: 97.3 mm Outer: 124 mm 48 teeth
€30,41 €25,13
 
GRANIT Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm, PAD horizontal
GRANIT
Aircon compressor 12 V, Ø 115 mm, 2 grooves, 100 ccm, PAD horizontal
Pulley Ø (mm): 115 | Connection: PAD horizontal | Suitable oil: PAG 46 | No. of ...
€275,77 €227,91
 
LUK Clutch kit flywheel flat Deutz-Fahr Agrolux 60 - 77
2%
LUK
Clutch kit flywheel flat Deutz-Fahr Agrolux 60 - 77
Contents: Pressure plate 458131022810, clutch plate 458331017911
€588,06 €486,00 €574,94 €475,16
 
LUK Clutch plate 310TDCN 36 x 40 mm, 24 splines, sintered
2%
LUK
Clutch plate 310TDCN 36 x 40 mm, 24 splines, sintered
Dimensions (mm): 36 x 40 24 grooves | Material specifications: Sintered clutch l...
€314,91 €260,26 €307,89 €254,45
 
GRANIT Clutch plate 310, 36 x 40 mm, 24 splines
GRANIT
Clutch plate 310, 36 x 40 mm, 24 splines
Dimensions (mm): 36 x 40, 24 grooves | Additional information: Made in Germany
€240,11 €198,44
 
MAHLE Alternator 14 V, 85 A, flange 56 mm, mounting angle l 30
25%
MAHLE
Alternator 14 V, 85 A, flange 56 mm, mounting angle l 30
Belt width (mm) / type: - | Nominal voltage (V): 14 | Nominal values (V / A): 14...
€416,78 €344,45 €313,44 €259,04
 
MAHLE Starter motor with reduction 12 V, 3,2 kW, 11 teeth, mounting Ø 82,5 mm
38%
MAHLE
Starter motor with reduction 12 V, 3,2 kW, 11 teeth, mounting Ø 82,5 mm
€484,69 €400,57 €301,14 €248,88
 
MAHLE Starter motor 12 V, 2,7 kW, 11 teeth, clockwise, mounting Ø 82,5 mm
38%
MAHLE
Starter motor 12 V, 2,7 kW, 11 teeth, clockwise, mounting Ø 82,5 mm
€467,60 €386,45 €290,53 €240,11
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
2%
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€7,67 €6,34 €7,52 €6,21
 
GRANIT Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3 mm
5%
GRANIT
Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3 mm
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3 mm / 3 mm.
€100,19 €82,80 €95,18 €78,66
 
GRANIT Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
2%
GRANIT
Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€10,25 €8,47 €10,05 €8,31
 
GRANIT Shim liner Top 1,25 mm Fendt, Deutz-Fahr
2%
GRANIT
Shim liner Top 1,25 mm Fendt, Deutz-Fahr
€9,74 €8,05 €9,55 €7,89
 
GRANIT Gasket crankshaft rear Fendt, Deutz-Fahr
2%
GRANIT
Gasket crankshaft rear Fendt, Deutz-Fahr
€2,21 €1,83 €2,17 €1,79
 
GRANIT Thrust washer for thickness 2,94 mm Deutz-Fahr
2%
GRANIT
Thrust washer for thickness 2,94 mm Deutz-Fahr
Engine types: FL912. Dimensions: Thickness 2.94 mm.
€14,50 €11,98 €14,21 €11,74
 
GRANIT Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3,5 mm
2%
GRANIT
Piston ring set 3 rings Ø 102 mm, 2,94 mm trapezoidal ring / 3 mm / 3,5 mm
Dimensions: 3 rings, Ø 102 mm, 2.94 mm (trapezoidal ring) / 3.00 mm / 3.5 mm.
€86,50 €71,49 €84,77 €70,06
 
GRANIT Foot throttle cable 955 mm, 760 mm Deutz-Fahr Agroplus 60-80
5%
GRANIT
Foot throttle cable 955 mm, 760 mm Deutz-Fahr Agroplus 60-80
A: 955 mm. B: 760 mm.
€162,75 €134,50 €154,61 €127,78
 
GRANIT Oil sump gasket 4 cylinder engine F4L913 Fendt, Deutz-Fahr
2%
GRANIT
Oil sump gasket 4 cylinder engine F4L913 Fendt, Deutz-Fahr
€3,84 €3,17 €3,76 €3,11
 
GRANIT Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
2%
GRANIT
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm.
€2,75 €2,27 €2,70 €2,23
 
GRANIT Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
2%
GRANIT
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€17,73 €14,65 €17,38 €14,36
 
GRANIT Valve seat ring outlet valve Fendt, Deutz-Fahr
2%
GRANIT
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€21,76 €17,98 €21,32 €17,62
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., spline-as B 17 x 14, 9 splines, left
15%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., spline-as B 17 x 14, 9 splines, left
Output volume: 19 cc/rev. Drive shaft: Splined shaft 17 x 14 9 splines. Operatin...
€668,77 €552,70 €568,45 €469,79
 
GRANIT Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
2%
GRANIT
Gas strut rear window 200 N, 445 mm, stroke 180,5 mm
suitable for: Heckscheibe. Newtons: 200. A: 445 mm. B: 220 mm. C: 8 mm. D: 8 mm....
€44,17 €36,50 €43,29 €35,78
 
GRANIT Gas strut door screen 200 N, 265 mm, stroke 94 mm Deutz-Fahr
2%
GRANIT
Gas strut door screen 200 N, 265 mm, stroke 94 mm Deutz-Fahr
suitable for: Türscheibe. Newtons: 200. A: 265 mm. B: 147 mm. C: 10 mm. D: 10 mm...
€64,44 €53,26 €63,15 €52,19
 
Showing 145 - 168 of 182

Parts for your Deutz-Fahr Agroplus 70 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr Agroplus 70. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr Agroplus 70. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr Agroplus 70. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart