Menu
EUR

Deutz-Fahr AgroPrima 6.16 tractor parts & technical data

Keeping a Deutz-Fahr AgroPrima 6.16 in good order is simpler with more than 300 parts on one page, from trailer couplings and lighting to electrics.

290 parts found for Deutz-Fahr AgroPrima 6.16
Show:
Clevis lift arm thread M32 Deutz-Fahr
Dimensions: thread = M32 mm. More
Dimensions: thread = M32 mm.
€367,36 €303,60 €348,95 €288,39
You save 5%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.832,06 €1.514,10 €1.439,45 €1.189,63
You save 21%
GRANIT Temperature warning switch 12 V, M10, flat head
GRANIT
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperature: - °C. More
Version: Flat head | M10. Connection: Flat head. Thread: M10. Temperat...
€104,06 €86,00 €98,85 €81,69
You save 5%
Fuse box 12-pin blade connection, 204 x 63 x 36,5 mm
Version: Suitable for Deutz 01174149 black, without fuses, for flat plug connector L 204 x W 63 x H 36.5 mm. To fit: Flat plug. Number of pins: 12. More
Version: Suitable for Deutz 01174149 black, without fuses, for flat pl...
€137,59 €113,71 €124,45 €102,85
You save 10%
HELLA Glass rear light left, 4 light functions, with red spare lens
HELLA
To fit as: Deutz-Fahr DX 3.10SC, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, DX 4.17, 4.57, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17,... More
To fit as: Deutz-Fahr DX 3.10SC, 3.30, 3.50, 3.60, 3.65, 3.70, 3.80, D...
€18,00 €14,88
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
GRANIT
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening torque: 25 Nm Dimensions: 220 x Ø 57.9 mm More
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tig...
€618,91 €511,50 €587,95 €485,91
You save 5%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
You save 21%
LUK Clutch kit Ø 280 mm Deutz-Fahr AgroPrima 4.31 - 6.16, DX 4.10 - 120
LUK
Contents: Pressure plate 458231002017, clutch plate 458328011616 More
Contents: Pressure plate 458231002017, clutch plate 458328011616
€1.149,67 €950,14 €1.092,15 €902,60
You save 5%
LUK Clutch kit double clutch Ø 310 mm Deutz-Fahr
LUK
Disc Ø (mm): 310 | Contents: Double clutch and clutch plate More
Disc Ø (mm): 310 | Contents: Double clutch and clutch plate
€1.126,51 €931,00 €1.070,15 €884,42
You save 5%
GRANIT Clutch plate 280, 31 x 36 mm, 16 splines Deutz-Fahr
GRANIT
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in Germany More
Dimensions (mm): 31 x 36, 16 grooves | Additional information: Made in...
€139,43 €115,23 €132,45 €109,46
You save 5%
Ball joint 270 mm, taper 24 - 26 mm, M22 x 1,5, M22 x 1,5
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€81,36 €67,24 €77,25 €63,84
You save 5%
GRANIT Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
GRANIT
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€159,90 €132,15 €151,90 €125,54
You save 5%
GRANIT Brake disc Ø 284 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
€309,64 €255,90 €294,15 €243,10
You save 5%
Main bearing standard Ø 70 mm Fendt, Deutz-Fahr
Engine types: FL812, FL912. Dimensions: 4. More
Engine types: FL812, FL912. Dimensions: 4.
€16,25 €13,43
Steering valve dw afgedicht 210 bar, 70 l/min, system SD80
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 70 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€727,84 €601,52 €691,40 €571,41
You save 5%
GRANIT Gas strut roof window or windshield 200 N, 255 mm Deutz-Fahr
GRANIT
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: 125 mm. C: 8 mm. D: 6 mm. Form: 8. To fit: roof hatch or windscreen. More
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: ...
€46,91 €38,77 €44,55 €36,82
You save 5%
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
GRANIT
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 54804. More
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke...
€41,77 €34,52 €39,65 €32,77
You save 5%
GRANIT Push button switch hazard lights 12 / 24 V red, with lock
GRANIT
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€55,42 €45,80 €52,60 €43,47
You save 5%
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,15 €5,08
Rear light 158 x 64 x 51 mm, 12 V, left, number plate light
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. Bulbs included: No. Light function: Indicator light, rear light, brake light, nu... More
Nominal voltage: 12 V. Installation location: Left. Bulb: P21W, R10W. ...
€70,90 €58,60 €64,10 €52,98
You save 10%
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€483,47 €399,56 €459,25 €379,55
You save 5%
Showing 73 - 96 of 290

Deutz-Fahr AgroPrima 6.16 parts

Many AgroPrima 6.16 tractors have years of field work behind them, and sooner or later the clutch, the seals and the cab need attention. This page lists more than 300 replacement parts for this model, supplied by GRANIT, HELLA, ROCKINGER, LUK, MAHLE and others.

Refitting cab glass

If a window has cracked, there is a repair set with polyurethane bonding sealant and primer. Remove all of the old adhesive from the frame, degrease the surface and apply the primer before the sealant goes on. Then give it enough time to cure before heading out, or vibration will loosen the glass again.

Gas struts for the door and windows, push button switches for the work lamps and a tractor seat round off the cab items.

Clutch, engine, hitching and fit

Complete clutch kits and thrust bearings are available. Whenever the clutch is out, fit a new release bearing at the same time. Shims help to restore the correct clearance when setting things up again, and there is a fixed brake caliper too.

For the brake caliper, use the brake fluid specified on the part and bleed the system thoroughly after fitting.

For the engine there is a crankshaft seal, exhaust gaskets and alternators. On the linkage, the lift shaft seal is a common spot for oil to weep after years of use, and the left hand seal is listed here.

If the battery is not charging well, measure the voltage at the terminals with the engine running and check the belt and earth cable before replacing the alternator.

Drawbars, a drawbar frame and a trailer coupling are available for towing work.

Once coupled, the pin of the trailer coupling must lock fully. Check that the safety catch is really closed before you drive off, and replace a worn pin in good time. Door gas struts are best replaced together and fitted with the rod pointing down.

Use the identification plate to confirm you have an AgroPrima 6.16. Seals and bearings usually show their size or a reference number on the old part, so compare that with the product page. For a drawbar, measure the rail width, and for an alternator check the flange and pulley. Lay the old part next to the product details while comparing, so small differences stand out.

AgroPrima 6.06

The Deutz-Fahr AgroPrima 6.06 from the same series has its own page with the parts for that model. Every other tractor from the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart