Menu
EUR

Deutz-Fahr AgroPrima 6.16 tractor parts & technical data

Keeping a Deutz-Fahr AgroPrima 6.16 in good order is simpler with more than 300 parts on one page, from trailer couplings and lighting to electrics.

290 parts found for Deutz-Fahr AgroPrima 6.16
Show:
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr AgroCompact 3.30 V/F, 3.50 V/F, 3.50 S, 3.70 V/F, 3.90 F, 3.90 S, AgroP... More
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, De...
€6,40 €5,29
AKS-Dasis Air conditioning compressor 12 V, pulley Ø 152 mm, 175 ccm oil Deutz-Fahr
AKS-Dasis
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 12 | Additional information: Cylinder head ID: B Inlet: 19.1 mm Outlet: 22.2 mm |... More
Oil quantity (ccm): 175 | Pulley Ø (mm): 152 | Nominal voltage (V): 1...
€483,47 €399,56 €459,25 €379,55
You save 5%
Scharmüller Drawbar frame prepared for drawbar 270 mm, 43,2 kN Kubota M5N
Scharmüller
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota grey | Guide width (mm): 32 | Load capacity (kg): 1500 | Category: Bearing support... More
D-value (kN): 43,2 | Version: Prepared for drawbar | Colour: Kubota gr...
€1.327,65 €1.097,23
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€290,88 €240,40 €181,80 €150,25
You save 38%
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€617,32 €510,18 €496,30 €410,17
You save 20%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroPrima, AgroXtra
Medium: DOT4. Hole Ø: 20.64 mm. More
Medium: DOT4. Hole Ø: 20.64 mm.
€603,03 €498,37 €572,85 €473,43
You save 5%
Protective cap brake cylinder DOT4 Deutz D 6807C-7807, DX 3.70SC-86
GRANIT Strainer brake reservoir Deutz-Fahr
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €34,00 €28,10
You save 5%
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€10,25 €8,47
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812. More
Engine types: FL912, FL913, FL812.
€12,00 €9,92
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT Piston set complete Ø 102 mm, combustion chamber 56 mm, cooling channel
GRANIT
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion chamber Ø 56 mm, combustion chamber depth 16.6 mm, coolant channel. More
Dimensions: 3 rings, Ø 102 mm, gudgeon pin Ø 35 x 80 mm, combustion ...
€202,82 €167,62 €192,65 €159,21
You save 5%
GRANIT Push rod tube 220 mm Deutz-Fahr
GRANIT
Engine types: FL912, FL913, FL812. Length: 220 mm. More
Engine types: FL912, FL913, FL812. Length: 220 mm.
€25,40 €20,99
Valve cover gasket engine FL912, FL913, BFL913 Fendt, Deutz-Fahr, Linde
Exhaust manifold Deutz-Fahr
€187,45 €154,92 €178,00 €147,11
You save 5%
Gas strut roof window or windshield 200 N, 255 mm, stroke 91 mm Deutz-Fahr
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: 125 mm. C: 6 mm. D: 6 mm. Form: 8. d1: 6 mm. d2: 15 mm. Stroke: 91 mm. To fit: R... More
suitable for: Dachluke oder Frontscheibe. Newtons: 200. A: 255 mm. B: ...
€53,45 €44,17 €50,75 €41,94
You save 5%
Replacement key lock number 1012
Locking number: 1012. More
Locking number: 1012.
€37,10 €30,66
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.903,30 €1.572,98
Showing 97 - 120 of 290

Deutz-Fahr AgroPrima 6.16 parts

Many AgroPrima 6.16 tractors have years of field work behind them, and sooner or later the clutch, the seals and the cab need attention. This page lists more than 300 replacement parts for this model, supplied by GRANIT, HELLA, ROCKINGER, LUK, MAHLE and others.

Refitting cab glass

If a window has cracked, there is a repair set with polyurethane bonding sealant and primer. Remove all of the old adhesive from the frame, degrease the surface and apply the primer before the sealant goes on. Then give it enough time to cure before heading out, or vibration will loosen the glass again.

Gas struts for the door and windows, push button switches for the work lamps and a tractor seat round off the cab items.

Clutch, engine, hitching and fit

Complete clutch kits and thrust bearings are available. Whenever the clutch is out, fit a new release bearing at the same time. Shims help to restore the correct clearance when setting things up again, and there is a fixed brake caliper too.

For the brake caliper, use the brake fluid specified on the part and bleed the system thoroughly after fitting.

For the engine there is a crankshaft seal, exhaust gaskets and alternators. On the linkage, the lift shaft seal is a common spot for oil to weep after years of use, and the left hand seal is listed here.

If the battery is not charging well, measure the voltage at the terminals with the engine running and check the belt and earth cable before replacing the alternator.

Drawbars, a drawbar frame and a trailer coupling are available for towing work.

Once coupled, the pin of the trailer coupling must lock fully. Check that the safety catch is really closed before you drive off, and replace a worn pin in good time. Door gas struts are best replaced together and fitted with the rod pointing down.

Use the identification plate to confirm you have an AgroPrima 6.16. Seals and bearings usually show their size or a reference number on the old part, so compare that with the product page. For a drawbar, measure the rail width, and for an alternator check the flange and pulley. Lay the old part next to the product details while comparing, so small differences stand out.

AgroPrima 6.06

The Deutz-Fahr AgroPrima 6.06 from the same series has its own page with the parts for that model. Every other tractor from the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart