Menu
EUR

Deutz-Fahr AgroPrima 6.16 tractor parts & technical data

Keeping a Deutz-Fahr AgroPrima 6.16 in good order is simpler with more than 300 parts on one page, from trailer couplings and lighting to electrics.

290 parts found for Deutz-Fahr AgroPrima 6.16
Show:
Tappet tube spring Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, FL712. More
Engine types: FL912, FL913, FL812, FL712.
€7,20 €5,95
GRANIT Valve guide inlet and outlet Fendt, Deutz-Fahr
GRANIT
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€7,75 €6,41
GRANIT Cylinder head bolt 210 mm engine Deutz FL912, FL913
GRANIT
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 68008. More
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 680...
€23,40 €19,34
Outlet valve new version 3-rings Deutz engine F2L912-BF6L913
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€33,00 €27,27
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 58 mm Deutz-Fahr
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 25 Nm, Dimensions: 220 x Ø 58 mm. More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€595,67 €492,29 €565,85 €467,64
You save 5%
GRANIT Steering valve ew/dw with float position 220 bar, 60 l/min, system SD80
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 60 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 130... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€711,79 €588,26 €676,20 €558,84
You save 5%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.531,15 €2.091,86
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€171,94 €142,10 €163,30 €134,96
You save 5%
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€39,26 €32,45 €37,25 €30,79
You save 5%
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
GRANIT
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€38,18 €31,55 €34,50 €28,51
You save 10%
Step 340 x 160 x 30 mm Deutz-Fahr Agroprima, Agrostar, Agroxtra, DX
Dimensions: 340x160x30mm mm. More
Dimensions: 340x160x30mm mm.
€90,48 €74,78 €85,95 €71,03
You save 5%
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
Temperature warning switch 6 - 24 V, M14 x 1,5 mm, up to 100 °C
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection: Flat head. Thread: M14 x 1.5. Temperature: 40 - 100 °C. More
Version: Flat head | 6 - 24 V | M14 x 1.5 | Up to max. 100. Connection...
€86,68 €71,64 €78,40 €64,79
You save 10%
Push button switch windshield wiper 12/24 V, button yellow, Ø 30 mm
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminals 6.3 x 0.8 (+- 53a- 53- 31b- 31), Dustproof and splashproof, With glass socket ... More
Version: 12/24 V, Yellow button, with lock, Ø 30 mm, 5 blade terminal...
€41,53 €34,32 €37,55 €31,03
You save 10%
HELLA Reflector round orange Ø 60 mm, bore Ø 6,0 mm, screwed
HELLA
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Material: Plastic. Depth: 7 mm. Fixing: Horizontal. Installation location: Left, right.... More
Colour: Yellow. Hole Ø: 6.0 mm. Form: Round. Total Ø: 60 mm. Materia...
€1,96 €1,62
GRANIT Headlight left / right 12 / 24 V, H4, glass Ø 136 mm, built-in
GRANIT
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, right. Nominal voltage: 12 / 24 V. Test mark: E20. Light function: Dipped beam, ful... More
Bulb: 12V60/55W / H4, 24V75/70W / H4. Installation location: Left, rig...
€153,10 €126,53 €138,50 €114,46
You save 10%
Number plate light R5W, 58 x 38 x 31,5 mm, attachment
Bulb: R10W. Width: 58 mm. Height: 38 mm. Dimensions W x H x D: 58 x 38 x 31,5 mm. Depth: 31,5 mm. Type: Bulb. Mounting type: Mounting. More
Bulb: R10W. Width: 58 mm. Height: 38 mm. Dimensions W x H x D: 58 x 38...
€34,79 €28,75 €33,00 €27,27
You save 5%
Replacement key plastic-coated black, lock number 14607
Version: Locking no. 14607 | To fit: New Holland, Steyr More
Version: Locking no. 14607 | To fit: New Holland, Steyr
€7,25 €5,99
Gasket exhaust Deutz, Deutz-Fahr
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, 6807, 6907, 7007, 7207, series 07C, 4507C, 4807C, 5207C, 6007C, 6207C, 6507C, 68... More
To fit as: Deutz series 07, 4007, 4507, 4807, 5207, 6007, 6207, 6507, ...
€7,20 €5,95
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
€312,95 €258,64 €195,55 €161,61
You save 38%
Clutch cable driving clutch 1285 mm, sleeve 955 mm, M8, M12 Deutz-Fahr
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12 More
Sleeve length (mm): 955 | Cable length (mm): 1285 | Thread: M08, M12
€87,68 €72,46 €83,25 €68,80
You save 5%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
€196,98 €162,79 €187,10 €154,63
You save 5%
Showing 145 - 168 of 290

Deutz-Fahr AgroPrima 6.16 parts

Many AgroPrima 6.16 tractors have years of field work behind them, and sooner or later the clutch, the seals and the cab need attention. This page lists more than 300 replacement parts for this model, supplied by GRANIT, HELLA, ROCKINGER, LUK, MAHLE and others.

Refitting cab glass

If a window has cracked, there is a repair set with polyurethane bonding sealant and primer. Remove all of the old adhesive from the frame, degrease the surface and apply the primer before the sealant goes on. Then give it enough time to cure before heading out, or vibration will loosen the glass again.

Gas struts for the door and windows, push button switches for the work lamps and a tractor seat round off the cab items.

Clutch, engine, hitching and fit

Complete clutch kits and thrust bearings are available. Whenever the clutch is out, fit a new release bearing at the same time. Shims help to restore the correct clearance when setting things up again, and there is a fixed brake caliper too.

For the brake caliper, use the brake fluid specified on the part and bleed the system thoroughly after fitting.

For the engine there is a crankshaft seal, exhaust gaskets and alternators. On the linkage, the lift shaft seal is a common spot for oil to weep after years of use, and the left hand seal is listed here.

If the battery is not charging well, measure the voltage at the terminals with the engine running and check the belt and earth cable before replacing the alternator.

Drawbars, a drawbar frame and a trailer coupling are available for towing work.

Once coupled, the pin of the trailer coupling must lock fully. Check that the safety catch is really closed before you drive off, and replace a worn pin in good time. Door gas struts are best replaced together and fitted with the rod pointing down.

Use the identification plate to confirm you have an AgroPrima 6.16. Seals and bearings usually show their size or a reference number on the old part, so compare that with the product page. For a drawbar, measure the rail width, and for an alternator check the flange and pulley. Lay the old part next to the product details while comparing, so small differences stand out.

AgroPrima 6.06

The Deutz-Fahr AgroPrima 6.06 from the same series has its own page with the parts for that model. Every other tractor from the brand is under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart