Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 4.61 tractor parts & technical data

Getting your Deutz-Fahr AgroStar 4.61 back in shape? More than 250 matching parts are grouped here, led by trailer couplings, electrics and lighting.

298 parts found for Deutz-Fahr AgroStar 4.61
Show:
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€132,96 €109,88 €122,32 €101,09
You save 8%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
SACHS Clutch plate 330, 44 x 48 mm, 22 splines sintered Deutz-Fahr
SACHS
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintere...
€795,65 €657,56 €732,00 €604,96
You save 8%
Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 44 x 48, 22 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€553,30 €457,27 €509,04 €420,69
You save 8%
Clutch plate 330 with torsion damper, 41 x 45 mm, 21 splines, sintered
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sinter...
€517,97 €428,07 €476,53 €393,83
You save 8%
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€644,17 €532,37 €496,33 €410,19
You save 23%
Universal joint 30,2 x 82 mm, bush lubrication
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 30,2 mm. B: 82 mm. Universal joint size: . Lubrication system: Bush...
€171,77 €141,96 €158,03 €130,60
You save 8%
Knott Industrietechnik Indicator brake lining Deutz-Fahr AgroPrima, AgroStar, AgroXtra
€72,22 €59,69 €66,44 €54,91
You save 8%
Brake drum / disc inner-Ø 180 mm, disc-Ø 275 mm, with taper
€284,72 €235,31 €261,94 €216,48
You save 8%
Gaiter Ø 33 mm upper, Ø 80 mm lower Deutz DX 80-145
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm. More
Inner Ø top: 33 mm. Inner Ø bottom: 80 mm.
€62,07 €51,30 €57,10 €47,19
You save 8%
VICTOR REINZ Cylinder head gasket thickness 1,4 mm, Ø 102,6 mm engine FL912, FL913 Deutz
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. More
Engine types: FL912, FL913, BFL912, BFL913.
€18,35 €15,17
V-belt Deutz-Fahr DX 4.70-6.05, AgroPrima 4.51-6.16
€41,46 €34,26 €38,14 €31,52
You save 8%
Sealing ring for injection nozzle Ø 19 x 9,2 mm, 2 mm thick, copper Deutz-Fahr
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm. More
Outer Ø: 19 mm. Inner Ø: 9,2 mm. Material: copper. Thickness: 2 mm.
€3,03 €2,50
Connecting rod Ø 40 / 70 mm, length 161 mm Deutz-Fahr
Dimensions: Ø 40 / 70, Length 161 mm. More
Dimensions: Ø 40 / 70, Length 161 mm.
€363,61 €300,50 €334,52 €276,46
You save 8%
Exhaust manifold Deutz-Fahr
€195,61 €161,66 €179,96 €148,73
You save 8%
Bosch/Rexroth Double pump anticlockwise 19 + 11 cm³/rpm. Deutz-Fahr
Bosch/Rexroth
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 230/280 bar. Direction of rotation: Anticlockwise. Output volume: ... More
OEM version: 02239230. Drive shaft: Taper 1:5, Ø 17 x 17. Operating p...
€990,03 €818,21 €910,83 €752,75
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Scharmüller Drawbar frame standard 330/25/32 mm, 3000 kg, black Deutz-Fahr, Steyr
Scharmüller
To fit as: Deutz-Fahr Serie DX AgroPrima, DX Agrostar, DX AgroXtra, DX-4-Reihe, DX-6-Reihe, DX-Reihe; Steyr Serie 8100 SK-2; More
To fit as: Deutz-Fahr Serie DX AgroPrima, DX Agrostar, DX AgroXtra, DX...
€1.187,63 €981,51 €1.130,71 €934,47
You save 5%
Cobo Contact switch mechanical PTO clutch 540 / 1000 rpm.
Cobo
Version: For PTO clutch, 540/1000 rpm. To fit: Deutz, Lamborghini, Same. More
Version: For PTO clutch, 540/1000 rpm. To fit: Deutz, Lamborghini, Sam...
€38,45 €31,78 €35,37 €29,23
You save 8%
Sensor speed inductive encoder
Version: Inductive displacement sensor (speed). More
Version: Inductive displacement sensor (speed).
€91,79 €75,86 €84,45 €69,79
You save 8%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr AgroCompact 3.30 V/F, 3.50 V/F, 3.50 S, 3.70 V/F, 3.90 F, 3.90 S, AgroP... More
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, De...
€6,68 €5,52
Repair set feed pump set of parts outer-Ø 41 mm
To fit as: Pierburg and Imsa. More
To fit as: Pierburg and Imsa.
€20,01 €16,54
Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening torque: 25 Nm Dimensions: 220 x Ø 57.9 mm More
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tig...
€645,84 €533,75 €594,17 €491,05
You save 8%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,87 €346,18
You save 40%
Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€82,12 €67,87 €75,55 €62,44
You save 8%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€61,12 €50,51 €56,23 €46,47
You save 8%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
You save 8%
Repair set foot brake without piston Knott version Deutz-Fahr
€65,99 €54,54 €60,71 €50,17
You save 8%
VICTOR REINZ Cylinder head gasket 1,1 mm, outer-Ø 120 mm Fendt, Deutz-Fahr
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: Stahl. Thickness: 1,1 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Colour: A-Form. Outer Ø: ...
€10,74 €8,87
Oil cooler Deutz-Fahr AgroStar 4.61-4.78, engine BF4L913
€1.231,76 €1.017,98 €1.133,22 €936,54
You save 8%
Seal 80 x 3 mm Fendt, Deutz-Fahr
Dimensions: 80 x 3 mm. More
Dimensions: 80 x 3 mm.
€15,21 €12,57
Shim 1,5 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,5 mm.
€13,36 €11,04
Piston pin engine Deutz FL912, FL913
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€27,94 €23,09
Push rod tube 220 mm Deutz-Fahr
Engine types: FL912, FL913, FL812. Length: 220 mm. More
Engine types: FL912, FL913, FL812. Length: 220 mm.
€26,51 €21,91
Tappet engine FL912, FL913 Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€19,24 €15,90
Connecting rod bolt M12 x 1,5 x 65 mm Fendt, Deutz-Fahr
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm. More
Engine types: FL913, BFL913. Dimensions: M12 x 1.5 x 65 mm.
€23,13 €19,11
Main bearing standard Ø 75 mm Deutz-Fahr
Dimensions: Ø 75 mm. More
Dimensions: Ø 75 mm.
€27,03 €22,33
Cylinder head bolt 210 mm engine Deutz FL912, FL913
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 68008. More
Engine types: FL912, FL913. Dimensions: Length: 210 mm. Menke no.: 680...
€24,41 €20,18
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr AgroStar
Version: Length: 1210 mm, Inner Ø: 74 mm. More
Version: Length: 1210 mm, Inner Ø: 74 mm.
€242,99 €200,82 €223,55 €184,75
You save 8%
Showing 97 - 144 of 298

Deutz-Fahr AgroStar 4.61 parts for engine work, charging and hitching

Rebuilding the engine on an AgroStar 4.61 tends to stall on small items: liner shims, a crankshaft seal, an exhaust gasket. This page brings together more than 250 replacement parts that fit this Deutz-Fahr, made by GRANIT, HELLA, ROCKINGER, VICTOR REINZ and MAHLE.

Engine sealing and overhaul

For the block you will find shims for the cylinder liners, crankshaft seals, exhaust gaskets and sealing rings, including one for the lift shaft. There are also seals for the hydraulic pump and a repair set for the feed pump, which lets you recondition the pump rather than replace it.

A workshop tip on liner shims: once a liner is seated, measure how far its collar stands proud of the block with a dial gauge at several points around it, and only then choose the shim thickness. With too little protrusion the head gasket will not seal on that cylinder. With too much, the liner can crack when the head is torqued down.

Charging, clutch and brakes

If the battery stops charging, the alternator is the first suspect. Several alternators and starter motors fit the AgroStar 4.61, and they differ in flange and pulley, so compare the mounting on the old unit before choosing. The driveline is covered with clutch plates with torsion damper, the brakes with fixed calipers. In the cab, gas struts for the door and windows and replacement tractor seats take care of the operator.

Before ordering a clutch plate, count the splines on the old one and compare the outside diameter. With the tractor split anyway, look at the torsion damper springs on the old plate. If they are loose or worn in their windows, that was likely the cause of judder when pulling away. Check the friction face of the flywheel too before the new plate goes in.

Drawbars and couplings

At the rear you will find drawbars, drawbar frames and trailer couplings, among them ROCKINGER. Measure the rail width and the thickness of the locking pin on the frame that is fitted now, and you will know which drawbar slides into the rails.

Matching the part to your tractor

The type plate gives you the type and serial number. More reliable still is the number stamped or cast into the old part, which you can hold directly against the parts on this page.

Other tractors in the AgroStar range have their own parts pages. If you run more than one, check fitment separately for each model:

For every other series from the make, go to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart