Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 4.61 tractor parts & technical data

Getting your Deutz-Fahr AgroStar 4.61 back in shape? More than 250 matching parts are grouped here, led by trailer couplings, electrics and lighting.

298 parts found for Deutz-Fahr AgroStar 4.61
Show:
Pin 25 x 105 mm Deutz-Fahr
Dimensions: 25 x 105 mm. More
Dimensions: 25 x 105 mm.
€74,87 €61,88 €68,88 €56,93
You save 8%
Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 54804. More
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke...
€43,59 €36,02 €40,10 €33,14
You save 8%
Gas strut door 300 N, 505 mm, ball socket 13 mm Deutz-Fahr
Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. To fit: door. Form: 6. More
Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. To fit: door. ...
€27,58 €22,79
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€37,94 €31,36 €34,90 €28,85
You save 8%
Brake light switch mechanical M14 x 1, break contact, blade terminal 6,3 mm
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6.3 mm. Menke no.: 80803. More
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6...
€36,91 €30,51
Starter switch 12 V / 24 V, 7 blade connections - 2 keys
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm), Locking cylinder with water protection, 2 keys (type A 14603), Nu... More
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / ...
€100,66 €83,19 €92,61 €76,53
You save 8%
Brake pad set 90 x 15 x 70 mm, drive shaft and foot brake, Knott brake caliper
To fit as: Deutz AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroStar 4.61, 4.68, 4.71, 4.78, 6.08, 6.11, 6.21, 6.28, 6.31, 6.38, AgroXtra 4.47, 4.57, 6.0... More
To fit as: Deutz AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroStar 4.61...
€38,94 €32,18 €35,82 €29,61
You save 8%
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr
To fit as: Deutz AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 4.68, 4.78, 6.08, 6.28, 6.38, AgroPrima 6.16, Agrosun 100, 120, 140 More
To fit as: Deutz AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 4.68, 4.78, 6....
€242,99 €200,82 €223,55 €184,75
You save 8%
Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz, Deutz-Fahr
To fit as: Deutz Intrac 6.30, 6.60, DX 3.60SC, 3.65SC, 3.70SC, 3.80SC, 3.90SC, 3.70 V/F, 3.90F, 3.90S, 3.60VC, 3.65VC, 3.70 VC, 3.75VC, 3.90VC, 4.10, ... More
To fit as: Deutz Intrac 6.30, 6.60, DX 3.60SC, 3.65SC, 3.70SC, 3.80SC,...
€96,62 €79,85 €88,89 €73,46
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,08 €379,41
You save 23%
Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€166,86 €137,90 €153,51 €126,87
You save 8%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
Medium: DOT4. Hole Ø: 20.64 mm. More
Medium: DOT4. Hole Ø: 20.64 mm.
€595,62 €492,25 €547,97 €452,87
You save 8%
Knott Industrietechnik Lock pin Deutz-Fahr AgroPrima, AgroXtra, AgroStar
€9,79 €8,09
Repair set brake cylinder without piston Deutz AgroStar 4.61-6.61
Additional information: Without piston. More
Additional information: Without piston.
€48,28 €39,90 €44,42 €36,71
You save 8%
Bleed valve Knott version Deutz
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070. More
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070...
€24,94 €20,61
Fixed caliper, complete without brake lining Knott bottom left, DOT 4
€745,84 €616,40 €686,17 €567,09
You save 8%
Master brake cylinder Ø 20,64 mm, DOT 4 Deutz-Fahr AgroStar 4.61-6.61
€565,98 €467,75 €520,70 €430,33
You save 8%
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€37,37 €30,88 €34,38 €28,41
You save 8%
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,45 €32,60
You save 8%
Optibelt V-belt AV10 x 1600 LA Deutz-Fahr
€43,88 €36,26 €40,37 €33,36
You save 8%
Shim 1,45 mm liner Top, Ø 120 x 102,6 mm
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,45 mm.
€12,73 €10,52
Shim 1,3 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,3 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,3 mm.
€12,64 €10,44
Cover engine Deutz FL812-FL913
Engine types: FL912, FL913, FL812. More
Engine types: FL912, FL913, FL812.
€12,56 €10,38
O-ring oil pump 14,5 x 3 mm Fendt, Renault, Deutz-Fahr
Dimensions: 14.5 x 3 mm. More
Dimensions: 14.5 x 3 mm.
€8,25 €6,82
Connecting rod bush Ø 40 mm Deutz-Fahr
Engine types: FL812, FL912. Dimensions: BF4L913, BF6L913. More
Engine types: FL812, FL912. Dimensions: BF4L913, BF6L913.
€10,95 €9,05
Valve spring engine F2L912-F6L913, BF6L913 Deutz-Fahr, Fendt
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€11,95 €9,88
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712. More
Engine types: FL912, FL913, FL812, F712.
€60,95 €50,37 €56,07 €46,34
You save 8%
Tank cap bayonet connection with ventilation, tank collar Ø 83 mm
€81,95 €67,73 €75,39 €62,31
You save 8%
Shim 0,5 mm liner Bottom, Ø 117,6 x 112 mm Fendt, Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 mm. More
Outer Ø: 117,6 mm. Inner Ø: 112 mm. Material: Steel. Thickness: 0,5 ...
€3,59 €2,96
Shim cylinder liner 0,2 mm, Ø 117,6 x 110,1 mm Deutz-Fahr
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,2 mm. More
Outer Ø: 117,6 mm. Inner Ø: 110,1 mm. Material: Steel. Thickness: 0,...
€2,83 €2,33
Connecting rod bearing standard, Ø 66 mm Deutz-Fahr
Dimensions: Ø 66 mm mm. More
Dimensions: Ø 66 mm mm.
€22,34 €18,46
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913. More
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€28,38 €23,45
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913. More
Engine types: FL912, FL913.
€32,10 €26,53
Single pump 16,8 cm³/rpm., taper 1:5, Ø 17 x 17, left
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 mm. B: 107,5 mm. Direction of rotation: Anticlockwise. Line connection suction s... More
Output volume: 16,8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. A: 45 ...
€232,74 €192,35 €214,12 €176,96
You save 8%
Double hydraulic pump 19 + 11 cm³/rpm., taper 1:5 Ø 17 x 17
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. More
Output volume: 19 + 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17.
€348,29 €287,84 €320,43 €264,82
You save 8%
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 206 mm. To ... More
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. ...
€55,59 €45,94 €51,14 €42,27
You save 8%
Handle right and left Deutz-Fahr Actor 5510, Topliner 4090
€152,40 €125,95 €140,21 €115,87
You save 8%
Replacement key lock number 1012
Locking number: 1012. More
Locking number: 1012.
€38,75 €32,02
Inner ring front right lift arm 70 x 84 x 1 mm Deutz-Fahr
Dimensions: 70 x 84 x 1 mm. More
Dimensions: 70 x 84 x 1 mm.
€53,35 €44,09 €49,08 €40,56
You save 8%
Sealing ring piston 88 x 3 mm Deutz-Fahr
Dimensions: 88 x 3 mm. More
Dimensions: 88 x 3 mm.
€36,14 €29,87
Sealing ring piston 70 x 89 x 12 mm Deutz-Fahr
Dimensions: 70 x 89 x 12 mm. More
Dimensions: 70 x 89 x 12 mm.
€40,97 €33,86 €37,69 €31,15
You save 8%
Ball joint lift arm Deutz-Fahr DX, AgroPrima, AgroStar, AgroXtra
€474,62 €392,25 €436,65 €360,87
You save 8%
Showing 193 - 240 of 298

Deutz-Fahr AgroStar 4.61 parts for engine work, charging and hitching

Rebuilding the engine on an AgroStar 4.61 tends to stall on small items: liner shims, a crankshaft seal, an exhaust gasket. This page brings together more than 250 replacement parts that fit this Deutz-Fahr, made by GRANIT, HELLA, ROCKINGER, VICTOR REINZ and MAHLE.

Engine sealing and overhaul

For the block you will find shims for the cylinder liners, crankshaft seals, exhaust gaskets and sealing rings, including one for the lift shaft. There are also seals for the hydraulic pump and a repair set for the feed pump, which lets you recondition the pump rather than replace it.

A workshop tip on liner shims: once a liner is seated, measure how far its collar stands proud of the block with a dial gauge at several points around it, and only then choose the shim thickness. With too little protrusion the head gasket will not seal on that cylinder. With too much, the liner can crack when the head is torqued down.

Charging, clutch and brakes

If the battery stops charging, the alternator is the first suspect. Several alternators and starter motors fit the AgroStar 4.61, and they differ in flange and pulley, so compare the mounting on the old unit before choosing. The driveline is covered with clutch plates with torsion damper, the brakes with fixed calipers. In the cab, gas struts for the door and windows and replacement tractor seats take care of the operator.

Before ordering a clutch plate, count the splines on the old one and compare the outside diameter. With the tractor split anyway, look at the torsion damper springs on the old plate. If they are loose or worn in their windows, that was likely the cause of judder when pulling away. Check the friction face of the flywheel too before the new plate goes in.

Drawbars and couplings

At the rear you will find drawbars, drawbar frames and trailer couplings, among them ROCKINGER. Measure the rail width and the thickness of the locking pin on the frame that is fitted now, and you will know which drawbar slides into the rails.

Matching the part to your tractor

The type plate gives you the type and serial number. More reliable still is the number stamped or cast into the old part, which you can hold directly against the parts on this page.

Other tractors in the AgroStar range have their own parts pages. If you run more than one, check fitment separately for each model:

For every other series from the make, go to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart