Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€56,50 €46,69 €51,98 €42,96
You save 8%
Set of parts foot brake Deutz-Fahr AgroPrima, AgroStar, AgroXtra
Description: Does NOT fit Agrostar 6.61. More
Description: Does NOT fit Agrostar 6.61.
€62,12 €51,34 €60,17 €49,73
You save 3%
Bleed valve Knott Deutz-Fahr AgroPrima, AgroStar, AgroXtra
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070. More
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070...
€36,06 €29,80
Fixed caliper, complete without brake lining Knott top right, DOT 4
€783,82 €647,79 €721,11 €595,96
You save 8%
Brake drum / disc left inner-Ø 180 mm, disc-Ø 276 mm
€630,05 €520,70 €579,65 €479,05
You save 8%
PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm. More
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm.
€509,31 €420,92 €468,57 €387,24
You save 8%
Gaiter Ø 31 mm upper Deutz DX 80-145
Inner Ø top: 31 mm. More
Inner Ø top: 31 mm.
€62,40 €51,57 €57,41 €47,44
You save 8%
VICTOR REINZ Cylinder head gasket thickness 1,6 mm, Ø 102,6 mm engine FL912, FL913 Deutz
VICTOR REINZ
Engine types: FL912, FL913, BFL912, BFL913. Outer Ø: 120 mm. Inner Ø: 102,6 mm. Thickness: 1,6 mm. More
Engine types: FL912, FL913, BFL912, BFL913. Outer Ø: 120 mm. Inner Ø...
€17,13 €14,15
Shaft seal Ø 25 mm, height 8 mm, FPM Fendt, Deutz-Fahr
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm. More
Material: FPM (fluorinated rubber). Inner Ø d1: 25 mm. Height 1: 8 mm
€48,08 €39,74 €44,23 €36,56
You save 8%
Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz Agrolux 60-90
Version: 11 V, 20 A, thread M20 x 1.5. More
Version: 11 V, 20 A, thread M20 x 1.5.
€96,62 €79,85 €88,89 €73,46
You save 8%
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Shim 1,4 mm liner Top, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,4 mm. More
Outer Ø: 120 mm. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,4 ...
€15,61 €12,90
Air hose air intake pipe inner-Ø 70 mm, length 50 mm Deutz-Fahr
Inner Ø: 70 mm. Outer Ø: 80 mm. Length: 50 mm. More
Inner Ø: 70 mm. Outer Ø: 80 mm. Length: 50 mm.
€37,56 €31,04
Disc for cylinder head bolt Ø 12 x 23 x 7 mm engine FL912, FL913
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm. More
Engine types: FL912, FL913. Dimensions: Ø 12 x 23 x 7 mm.
€14,35 €11,86
Valve cover bolt sealing ring nylon, Ø 16 x 8 mm, thickness 3,7 mm
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner Ø: 8 mm. Material: Nylon. Thickness: 3,7 mm. More
Engine types: FL712, FL812. Outer Ø: 16 mm. Form: Asymmetrical. Inner...
€1,63 €1,34
Shim liner Top 1,1 mm, Ø 120 x 102,6 mm Fendt, Deutz-Fahr
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. Thickness: 1,1 mm. More
Outer Ø: 120 mm. Form: A form. Inner Ø: 102,6 mm. Material: steel. T...
€4,75 €3,93
Crankshaft seal rear engine Deutz FL913, BFL913
€39,99 €33,05 €36,79 €30,41
You save 8%
Seal kit steering valve Deutz-Fahr
Description: for control unit 04360630, 04378905, 04383202, 04383203. More
Description: for control unit 04360630, 04378905, 04383202, 04383203.
€14,70 €12,15
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€643,00 €531,41 €591,56 €488,89
You save 8%
Gas strut door 300 N, 505 mm, stroke 81 mm Deutz-Fahr
suitable for: Tür. Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 81 mm. To fit: Door. More
suitable for: Tür. Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 1...
€95,28 €78,74 €87,66 €72,44
You save 8%
Door lock, left Deutz-Fahr AgroStar 4.61-6.61
€82,74 €68,38 €76,12 €62,91
You save 8%
Button Deutz-Fahr AgroPrima 4.31, DX 3.90 SC
€76,94 €63,59 €70,78 €58,50
You save 8%
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick console... More
To fit: Deutz V1. On-board voltage: 12 V. Upholstery type: Fabric. Sea...
€1.986,12 €1.641,42 €1.953,33 €1.614,32
You save 2%
Protective ring front left lift arm 90 x 75 x 10 mm Deutz-Fahr
Dimensions: 90 x 75 x 10 mm. More
Dimensions: 90 x 75 x 10 mm.
€33,59 €27,76 €30,90 €25,54
You save 8%
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm. More
Dimensions: 240 x 300 mm.
€67,42 €55,72 €62,03 €51,26
You save 8%
Bush right lift arm 74 x 80 x 85 mm Deutz-Fahr
Dimensions: 74 x 80 x 85 mm. More
Dimensions: 74 x 80 x 85 mm.
€179,42 €148,28 €165,07 €136,42
You save 8%
Clevis lift arm thread M32 Deutz-Fahr
Dimensions: thread = M32 mm. More
Dimensions: thread = M32 mm.
€383,34 €316,81 €352,67 €291,47
You save 8%
Pin 25 x 105 mm Deutz-Fahr
Dimensions: 25 x 105 mm. More
Dimensions: 25 x 105 mm.
€74,87 €61,88 €68,88 €56,93
You save 8%
Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 54804. More
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke...
€43,59 €36,02 €40,10 €33,14
You save 8%
Gas strut door 300 N, 505 mm, ball socket 13 mm Deutz-Fahr
Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. To fit: door. Form: 6. More
Newtons: 300. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. To fit: door. ...
€27,58 €22,79
Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€37,94 €31,36 €34,90 €28,85
You save 8%
Brake light switch mechanical M14 x 1, break contact, blade terminal 6,3 mm
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6.3 mm. Menke no.: 80803. More
Version: Thread M14 x 1, break contact, normally on, Blade terminals 6...
€36,91 €30,51
Starter switch 12 V / 24 V, 7 blade connections - 2 keys
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm), Locking cylinder with water protection, 2 keys (type A 14603), Nu... More
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / ...
€100,66 €83,19 €92,61 €76,53
You save 8%
Brake pad set 90 x 15 x 70 mm, drive shaft and foot brake, Knott brake caliper
To fit as: Deutz AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroStar 4.61, 4.68, 4.71, 4.78, 6.08, 6.11, 6.21, 6.28, 6.31, 6.38, AgroXtra 4.47, 4.57, 6.0... More
To fit as: Deutz AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroStar 4.61...
€38,94 €32,18 €35,82 €29,61
You save 8%
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr
To fit as: Deutz AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 4.68, 4.78, 6.08, 6.28, 6.38, AgroPrima 6.16, Agrosun 100, 120, 140 More
To fit as: Deutz AgroStar 4.61, 4.71, 6.11, 6.21, 6.31, 4.68, 4.78, 6....
€242,99 €200,82 €223,55 €184,75
You save 8%
Flame glow plug 11 V, 20 A, thread M20 x 1,5 Deutz, Deutz-Fahr
To fit as: Deutz Intrac 6.30, 6.60, DX 3.60SC, 3.65SC, 3.70SC, 3.80SC, 3.90SC, 3.70 V/F, 3.90F, 3.90S, 3.60VC, 3.65VC, 3.70 VC, 3.75VC, 3.90VC, 4.10, ... More
To fit as: Deutz Intrac 6.30, 6.60, DX 3.60SC, 3.65SC, 3.70SC, 3.80SC,...
€96,62 €79,85 €88,89 €73,46
You save 8%
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,08 €379,41
You save 23%
Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€166,86 €137,90 €153,51 €126,87
You save 8%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
Medium: DOT4. Hole Ø: 20.64 mm. More
Medium: DOT4. Hole Ø: 20.64 mm.
€595,62 €492,25 €547,97 €452,87
You save 8%
Knott Industrietechnik Lock pin Deutz-Fahr AgroPrima, AgroXtra, AgroStar
€9,79 €8,09
Repair set brake cylinder without piston Deutz AgroStar 4.61-6.61
Additional information: Without piston. More
Additional information: Without piston.
€48,28 €39,90 €44,42 €36,71
You save 8%
Bleed valve Knott version Deutz
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070. More
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070...
€24,94 €20,61
Fixed caliper, complete without brake lining Knott bottom left, DOT 4
€745,84 €616,40 €686,17 €567,09
You save 8%
Showing 145 - 192 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart