Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Deutz-Fahr AgroStar 6.11 tractor parts & technical data

Is there a Deutz-Fahr AgroStar 6.11 on your farm? Here are more than 250 parts for this model, including electrics, lighting and trailer couplings.

277 parts found for Deutz-Fahr AgroStar 6.11
Show:
FEBI Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€212,35 €175,50 €38,55 €31,86
You save 82%
BOSCH Gear reduction starter 12 V, 3,0 kW, 9 teeth, Ø 89 mm, flange 31 mm
€512,28 €423,37 €493,38 €407,75
You save 4%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€569,55 €470,70 €548,54 €453,34
You save 4%
Repair set feed pump set of parts outer-Ø 41 mm Deutz-Fahr, Linde
€20,01 €16,54
Bearing bush camshaft 47,9 x 52 x 30,5 mm Fendt, Deutz-Fahr
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm. More
Dimensions: Inner Ø 47.9, outer Ø 52, width 30.5 mm.
€33,53 €27,71
O-ring feed pump Ø 38 x 3 mm Deutz engine 912, 913W/T
Version: Ø 38 x 3 mm. More
Version: Ø 38 x 3 mm.
€7,99 €6,60
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 120 mm. Form: Rectangular. Height: 80... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment:...
€28,18 €23,29
SACHS Clutch plate 330 sintered, 41 x 45, 21 splines Deutz-Fahr AgroStar
SACHS
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 21 grooves | Material specifications: Sintere...
€770,56 €636,83 €708,92 €585,88
You save 8%
Scharmüller Clutch complete type 1120 coupling pin 38 mm, nose weight 1250 kg
Scharmüller
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | Internal width (mm): 98 | Colour: Black | Hole spacing (mm): 129 | D-value (kN):... More
Hole (mm): M20 | Overhang (mm): 211 | Thread: M20 | Lock: Automatic | ...
€1.364,15 €1.127,40 €1.261,52 €1.042,58
You save 8%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€468,16 €386,91 €280,40 €231,74
You save 40%
Rotary switch on / off, 3 blade terminals, Ø 12 mm
Version: Universal, circuit: on/off, 3 blade terminals, mounting opening Ø 12 mm / 8 mm mounting thickness More
Version: Universal, circuit: on/off, 3 blade terminals, mounting openi...
€106,69 €88,17 €98,15 €81,12
You save 8%
LUK Clutch plate 41 x 45 mm, 21 splines Deutz-Fahr AgroStar 4.61 - 6.38
LUK
Dimensions (mm): 41 x 45 21 grooves More
Dimensions (mm): 41 x 45 21 grooves
€649,02 €536,38 €597,10 €493,47
You save 8%
LUK Single clutch TGFR Deutz-Fahr AgroStar 4.61 - 6.38
€805,90 €666,03 €741,43 €612,75
You save 8%
MAHLE Alternator 14 V, 55 A, flange 56 mm Deutz-Fahr, Fendt
MAHLE
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley Ø (mm): - | Nominal voltage (V): 14 | Mo... More
Direction of rotation: ↻ | Belt width (mm) / type: - | Mounting L / ...
€319,94 €264,41 €191,62 €158,36
You save 40%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | Additional information: Dust-tight, with W connection | Belt tension... More
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rota...
€236,43 €195,40 €217,52 €179,77
You save 8%
Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€161,58 €133,54 €148,65 €122,85
You save 8%
Elring Cylinder head bolt set M12 x 1,75 x 211 mm, wrench size 17 - 4 pieces
Elring
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary set: For one cylinder head | AF (mm): 17 More
Notes: Set of 4 | Dimensions (mm): M12 x 1.75 x 211 | Supplementary se...
€118,56 €97,98 €109,08 €90,14
You save 8%
Starter motor with reduction 12 V, 2,7 kW, 9 teeth, 208,5 mm
€541,43 €447,46 €498,12 €411,67
You save 8%
Knott Industrietechnik Bleed valve Knott version Deutz
€15,98 €13,20
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€82,99 €68,59 €76,35 €63,10
You save 8%
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€1,73 €1,43
Manifold gasket exhaust Fendt, Deutz-Fahr
Engine types: FL712, FL812. More
Engine types: FL712, FL812.
€4,89 €4,04
Rotary switch ventilation, without knob, 5 connections
Version: For blower, 3 switching steps, With 5 blade terminals. More
Version: For blower, 3 switching steps, With 5 blade terminals.
€42,59 €35,20 €39,18 €32,38
You save 8%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€38,51 €31,83 €37,08 €30,65
You save 4%
Axial joint 208 mm, Ø 56 mm, M22 x 1,5 / M22 x 1,5
€56,78 €46,93 €52,24 €43,17
You save 8%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erforderlich. Die Endsektion ist mit vier Bohrungen zur Befestigung des We... More
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombin...
€363,63 €300,52 €334,54 €276,48
You save 8%
Bosch/Rexroth Triple pump 14 + 8 + 16 cm³, left Deutz-Fahr
Bosch/Rexroth
OEM version: 02239230 | Direction of rotation: Anticlockwise | Drive shaft: Splined shaft B 17 x 14 Z9 | Output volume (cc/rev): 14 + 8 + 16 | Bosch n... More
OEM version: 02239230 | Direction of rotation: Anticlockwise | Drive s...
€1.946,98 €1.609,07 €1.791,22 €1.480,35
You save 8%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€426,97 €352,87 €392,81 €324,64
You save 8%
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
You save 8%
LUK Clutch plate 44 x 48 mm, 22 splines Deutz-Fahr AgroStar 4.61 - 6.38
LUK
Dimensions (mm): 44 x 48 22 grooves More
Dimensions (mm): 44 x 48 22 grooves
€694,97 €574,36 €639,37 €528,41
You save 8%
Diaphragm pressure plate GMF 330 Deutz-Fahr AgroStar 4.61 - 6.38
Additional information: Made in Germany More
Additional information: Made in Germany
€711,62 €588,12 €654,69 €541,07
You save 8%
Elring Crankshaft seal rear 115 x 140 x 13 mm, FPM, engine FL912 - BFL913
Elring
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: FPM (fluoro rubber) More
Width (mm): 13 | Inner Ø (mm): 115 | Outer Ø (mm): 140 | Material: F...
€70,51 €58,27 €64,87 €53,61
You save 8%
Hand brake cable 810 mm, M14 Deutz-Fahr AgroStar 4.61-6.61
Length: 810 mm. Thread: M14. Dimensions: Length = 810 mm, Thread M14. More
Length: 810 mm. Thread: M14. Dimensions: Length = 810 mm, Thread M14.
€348,88 €288,33 €320,97 €265,26
You save 8%
Fixed caliper, complete without brake lining Knott top left, DOT 4
€783,82 €647,79 €721,11 €595,96
You save 8%
PTO shaft end piece 299 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm. More
Version: Length 299 mm, 1 3/8", 6 splines, for 540 rpm.
€467,30 €386,20 €429,92 €355,30
You save 8%
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€36,59 €30,24
Connecting rod bolt M12 x 1,5 x 55 mm Deutz-Fahr
Dimensions: M12 x 1.5 x 55 mm. More
Dimensions: M12 x 1.5 x 55 mm.
€31,71 €26,21
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€132,96 €109,88 €122,32 €101,09
You save 8%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
SACHS Clutch plate 330, 44 x 48 mm, 22 splines sintered Deutz-Fahr
SACHS
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 44 x 48 22 grooves | Material specifications: Sintere...
€795,65 €657,56 €732,00 €604,96
You save 8%
Clutch plate 330 44 x 48 mm, 22 splines Deutz-Fahr
Material specifications: Sintered clutch lining | Additional information: Made in Germany | Dimensions (mm): 44 x 48, 22 grooves More
Material specifications: Sintered clutch lining | Additional informati...
€553,30 €457,27 €509,04 €420,69
You save 8%
Clutch plate 330 with torsion damper, 41 x 45 mm, 21 splines, sintered
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 41 x 45, 21 grooves | Material specifications: Sinter...
€517,97 €428,07 €476,53 €393,83
You save 8%
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€644,17 €532,37 €496,33 €410,19
You save 23%
Showing 49 - 96 of 277

Deutz-Fahr AgroStar 6.11 parts for engine work and servicing

Stripping the engine on an AgroStar 6.11 is a job you want to do once, with every gasket and seal on the bench before you start. This page lists more than 250 parts that fit the Deutz-Fahr AgroStar 6.11, from GRANIT, HELLA, VICTOR REINZ, MAHLE and Walterscheid.

Engine parts

  • Cylinder head gaskets and exhaust gaskets
  • Crankshaft seals for the Deutz engine
  • Shims for the cylinder liners
  • Seal kits
  • Repair sets for the fuel feed pump

Measure liner protrusion before choosing shims

The shim under the collar of each cylinder liner sets how far the liner stands proud of the block. Too little protrusion and the head gasket is not clamped properly, which leads to a blown gasket. During a rebuild, measure the protrusion of every liner with a dial gauge and choose the shim thickness from that reading. Reusing the old shims without measuring is a gamble, as they settle over the years. Then torque the cylinder head down in the correct sequence and in stages.

Beyond the engine

The electrical side is covered with alternators and starter motors. For the driveline there are clutch plates, including versions with a torsion damper. The hydraulics get sealing rings for the lift shaft, and the brakes get fixed calipers supplied complete without lining. In the cab you will find door locks and gas struts for the door and windows, and at the back there are drawbar frames.

One more workshop habit: a new crankshaft seal can leak if its lip runs in the groove worn by the old one. Clean the shaft, oil the lip lightly and, if the groove is deep, press the new seal in slightly less far so it runs on clean metal.

Finding the matching part

The serial number of your AgroStar 6.11 is on the type plate. For engine parts the engine type matters as well, and that is marked on the block. The reference number on an old alternator, starter or caliper makes the comparison with the parts on this page straightforward.

Other AgroStar models

The AgroStar series includes these tractors, each with its own page:

If you run one of them next to the 6.11, check fitment on that model's own page. Older Deutz tractors and other ranges are on the page with all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart