Web Analytics
Deutz-Fahr AgroStar 6.31 tractor parts
Menu
EUR

Tractor parts Deutz-Fahr AgroStar 6.31

Looking for parts for your Deutz-Fahr AgroStar 6.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

255 parts found for Deutz-Fahr AgroStar 6.31
Show:
GRANIT Door lock, right Deutz-Fahr AgroStar 4.61-6.61
€79,29 €65,53 €77,70 €64,21
You save 2%
GRANIT Door lock, left Deutz-Fahr AgroStar 4.61-6.61
€79,29 €65,53 €77,70 €64,21
You save 2%
GRANIT Sealing ring piston 84 x 88 x 1,5 mm Deutz-Fahr
GRANIT
Dimensions: 84 x 88 x 1.5 mm. More
Dimensions: 84 x 88 x 1.5 mm.
€26,56 €21,95 €26,03 €21,51
You save 2%
GRANIT Mirror Deutz-Fahr AgroStar 4.61-6.61
€62,61 €51,74 €61,36 €50,71
You save 2%
GRANIT Sealing ring lift shaft left 75 x 90 x 10 mm, NBR Deutz-Fahr
GRANIT
Dimensions: 75 x 90 x 10 mm. Material: NBR. More
Dimensions: 75 x 90 x 10 mm. Material: NBR.
€36,36 €30,05 €35,63 €29,45
You save 2%
Starter motor 12 V, 2,7 kW, 9 teeth, clockwise
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345), 350GT (Typ 345), 360GT (Typ 360), 365GT (Typ 365), 370GT (Typ 148), 370GT (Ty... More
To fit as: Fendt 206 (Typ 326), GT 225, GT 250, GT 275, 345GT (Typ 345...
€411,71 €340,26 €349,95 €289,21
You save 15%
MANN-FILTER Air filter C17225/3
MANN-FILTER
Suitable secondary element 565CF800 More
Suitable secondary element 565CF800
€64,94 €53,67 €41,15 €34,01
You save 37%
GRANIT Shim 0,2 mm, inner-Ø 110,1 mm, outer-Ø 117,6 mm Fendt F 231 GT
GRANIT
To fit as: Fendt F 231 GT from serial no. 16774 More
To fit as: Fendt F 231 GT from serial no. 16774
€2,17 €1,79 €1,90 €1,57
You save 12%
GRANIT Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
GRANIT
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertical | Oil quantity (ccm): 210 | Suitable oil: PAG 46 | Fixing: EM | Pull... More
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"...
€406,21 €335,71
GRANIT Alternator 14 V, 55 A, flange 56 mm, Deutz-Fahr, Fendt
GRANIT
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values (V / A): 14 / 55 | Flange size (mm): 56,0 | Installation angle (°): l 60 | Pull... More
Belt width (mm) / type: - | Charging current (A): 55 | Nominal values ...
€153,72 €127,04
HELLA Alternator 14 V, 55 A without belt pulley Deutz-Fahr
HELLA
Charging current (A): 55 | Nominal voltage (V): 14 | Additional information: Without pulley More
Charging current (A): 55 | Nominal voltage (V): 14 | Additional inform...
€617,32 €510,18 €557,12 €460,43
You save 10%
BOSCH Starter motor 12 V, 2,7 kW, 9 teeth, mounting Ø 89 mm, clockwise
€545,81 €451,08 €518,84 €428,79
You save 5%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€58,58 €48,41 €57,41 €47,45
You save 2%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston. More
Medium: DOT4. Additional information: Without piston.
€54,15 €44,75 €53,07 €43,86
You save 2%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.815,00 €1.500,00 €1.542,75 €1.275,00
You save 15%
Knott Industrietechnik Lock pin Deutz-Fahr AgroPrima, AgroXtra, AgroStar
€7,50 €6,20 €7,35 €6,07
You save 2%
GRANIT Safety split pin foot brake Deutz-Fahr AgroPrima, AgroXtra, AgroStar
€8,47 €7,00 €8,30 €6,86
You save 2%
GRANIT Bleed valve Knott version Deutz
GRANIT
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070. More
Description: Fits fixed caliper 71704068, 71704066, 71704069, 71704070...
€19,42 €16,05 €19,03 €15,73
You save 2%
GRANIT Repair set foot brake without piston Knott version Deutz-Fahr
€63,23 €52,26 €61,97 €51,21
You save 2%
GRANIT Brake disc Ø 284 mm, 22 mm thick, 8-hole, for cardan shaft Deutz-Fahr
€309,64 €255,90 €263,19 €217,51
You save 15%
GRANIT PTO shaft end piece 335 mm, 1 3/8" 6 spline, 540 rpm Deutz-Fahr
GRANIT
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm. More
Version: Length 335 mm, 1 3/8", 6 grooves, For 540 rpm.
€488,08 €403,37 €414,87 €342,87
You save 15%
GRANIT Handle right
GRANIT
To fit as Deutz. More
To fit as Deutz.
€77,98 €64,45 €76,42 €63,16
You save 2%
VICTOR REINZ Crankshaft seal for Ø 65 x 85 x 10,5 mm engine FL912, FL913 Deutz-Fahr
€35,82 €29,60 €35,10 €29,01
You save 2%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€11,45 €9,46 €11,22 €9,27
You save 2%
Showing 73 - 96 of 255

Parts for your Deutz-Fahr AgroStar 6.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroStar 6.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroStar 6.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroStar 6.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart