Menu
EUR

Tractor parts Deutz-Fahr AgroStar 6.31

Looking for parts for your Deutz-Fahr AgroStar 6.31 tractor? In this category, you'll find everything you need for the maintenance and repair of your vehicle.

274 parts found for Deutz-Fahr AgroStar 6.31
Show:
Gear reduction starter 12 V, 4,0 kW, 9 teeth clockwise, flange 31 mm
9%
Gear reduction starter 12 V, 4,0 kW, 9 teeth clockwise, flange 31 mm
To fit as: Deutz-Fahr, Fendt, Hürlimann, Lamborghini, Same
€539,42 €445,80 €491,00 €405,79
 
GRANIT Spring for shift rod Deutz D25.2, D30, D30S, 2505, 3005, 4005
GRANIT
Spring for shift rod Deutz D25.2, D30, D30S, 2505, 3005, 4005
To fit as: Deutz D 25.2, D 30, D 30 S, 2505, 3005, 4005
€7,00 €5,79
 
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
9%
Aircon compressor 12 V, Ø 132 mm, 2 grooves, 210 ccm
No. of grooves: 2 | Nominal voltage (V): 12 | Connection: 7/8"" x 3/4"", vertica...
€426,97 €352,87 €388,70 €321,24
 
MAHLE Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
40%
MAHLE
Alternator 14 V, 95 A, fastening 56 / 8,2 / 86 mm
Nominal voltage (V): 14 | Direction of rotation: ↻ | Additional information: Dus...
€334,90 €276,78 €200,55 €165,74
 
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
23%
HELLA
Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,00 €379,34
 
GRANIT Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
9%
GRANIT
Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€82,12 €67,87 €74,75 €61,78
 
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
9%
Master brake cylinder Ø 20,64 mm, DOT4 Deutz-Fahr AgroStar 4.61-6.61
Medium: DOT4. Hole Ø: 20.64 mm.
€595,62 €492,25 €542,25 €448,14
 
GRANIT Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
9%
GRANIT
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
Additional information: Without piston.
€44,94 €37,14 €40,90 €33,80
 
GRANIT Flywheel 129 teeth Deutz-Fahr
9%
GRANIT
Flywheel 129 teeth Deutz-Fahr
Number of teeth: 129.
€2.160,96 €1.785,92 €1.967,30 €1.625,87
 
Force sensor pin 160 mm, Ø 24 mm Deutz-Fahr
9%
Force sensor pin 160 mm, Ø 24 mm Deutz-Fahr
Reference no.: 0.009.2194.420. Length (mm): 160. Ø (mm): 24.
€431,69 €356,77 €393,00 €324,79
 
KS Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
KS
Connecting rod bearing Ø 60 mm, width 25 mm Fendt, Deutz-Fahr
Dimensions: Ø 60 mm, Width 25 mm.
€25,40 €20,99
 
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
9%
VICTOR REINZ
Crankshaft seal rear Fendt, Deutz-Fahr
€42,88 €35,44 €39,00 €32,23
 
VICTOR REINZ Valve cover gasket Deutz engine FL912, FL913, BFL913
VICTOR REINZ
Valve cover gasket Deutz engine FL912, FL913, BFL913
€9,55 €7,89
 
GRANIT Rubber grommet cooling fan Fendt, Deutz-Fahr
GRANIT
Rubber grommet cooling fan Fendt, Deutz-Fahr
€6,55 €5,41
 
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
GRANIT
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
Thread: M22 x 1.5.
€14,30 €11,82
 
GRANIT Seal 80 x 3 mm Fendt, Deutz-Fahr
GRANIT
Seal 80 x 3 mm Fendt, Deutz-Fahr
Dimensions: 80 x 3 mm.
€14,55 €12,02
 
GRANIT Push rod Fendt, Deutz-Fahr
9%
GRANIT
Push rod Fendt, Deutz-Fahr
Engine types: FL912, FL913, FL812, F712.
€60,95 €50,37 €55,45 €45,83
 
GRANIT Valve seat ring outlet valve Fendt, Deutz-Fahr
GRANIT
Valve seat ring outlet valve Fendt, Deutz-Fahr
Engine types: F2L912, F3L912, F4L912, F6L912, F4L913, F6L913, BF6L913.
€27,20 €22,48
 
Valve cover gewelfd Fendt, Deutz-Fahr
Valve cover gewelfd Fendt, Deutz-Fahr
Engine types: FL912, FL913.
€30,75 €25,41
 
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr AgroStar
9%
Silencer vertical 1210 mm, Ø 74 mm Deutz-Fahr AgroStar
Version: Length: 1210 mm, Inner Ø: 74 mm.
€242,99 €200,82 €221,20 €182,81
 
Seal kit steering valve SD60 Deutz-Fahr
Seal kit steering valve SD60 Deutz-Fahr
Description: for control unit 02379662, 04360637, 04331325, 02940278.
€9,70 €8,02
 
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
9%
Double hydraulic pump 22,5 + 16 cm³/rpm., 9 teeth, B 17 x 14
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft 9 splines, 17 x 14. ...
€494,76 €408,89 €450,40 €372,23
 
Gasket lift housing 240 x 300 mm Deutz-Fahr
9%
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm.
€67,42 €55,72 €61,35 €50,70
 
Showing 73 - 96 of 274

Parts for your Deutz-Fahr AgroStar 6.31 tractor

At Techniek Totaal, you'll find a wide range of tractor parts for your Deutz-Fahr AgroStar 6.31. We also offer the right parts for all other tractor types from Deutz-Fahr. Enter your part number in the search bar to find the correct part.

Parts

We offer a complete range of parts. Whether it's a can of paint to make your tractor look like new again, or more complex engine parts to get your tractor running again, we have the right parts for your Deutz-Fahr AgroStar 6.31. Additionally, we offer parts for engine cooling, fuel systems, front axles, brakes, drives, bodywork, hydraulics, exhaust systems, and accessories.

Techniek Totaal in Barneveld

Techniek Totaal is a young company located in Barneveld, a central point in the Netherlands. For those looking to save on shipping costs, we are opening a pickup warehouse at the end of 2024 where parts will be ready for pickup every workday. This sets us apart from the modern world, where everything is handled exclusively online.

Ordering

Easily order parts for your Deutz-Fahr AgroStar 6.31. Use our parts-by-brand configurator to quickly find everything you need for your tractor, agricultural machine, or forklift. Once you place an order, we will process it immediately, and you'll receive it within 1 to 3 days.

About the manufacturer Deutz-Fahr

Deutz AG, from the German city of Cologne-Deutz (across the Rhine in Cologne), is one of the world's most renowned engine manufacturers, known under various names such as KHD (Klöckner-Humboldt-Deutz AG), the trucks of Magirus-Deutz, and the tractors of SDF (SAME Deutz-Fahr) with brands like Deutz-Fahr, SAME, Lamborghini, and Hürlimann. The logo is a large M with the stylized spire of the Ulm Minster on top.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart