Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

232 parts found for Deutz-Fahr AgroStar 6.61
Show:
Gasket silencer engine FL912, FL913 Deutz-Fahr
Gasket silencer engine FL912, FL913 Deutz-Fahr
Motor No: BFL913, BF6M1013.
€18,10 €14,96
 
GRANIT Shim washer 12 x 33/36 x 10 mm with edge engine FL913, BFL913C Turbo
5%
GRANIT
Shim washer 12 x 33/36 x 10 mm with edge engine FL913, BFL913C Turbo
Engine types: FL913, BFL913C Turbo. Dimensions: 12 x 33/36 x 10 with edge mm.
€66,36 €54,84 €63,00 €52,07
 
Cylinder head collar-Ø 124,5 mm Deutz-Fahr
5%
Cylinder head collar-Ø 124,5 mm Deutz-Fahr
Engine types: BF4L913C, BF6L913C. Collar Ø: 124,5 mm. Menke no.: 68036.
€821,90 €679,26 €780,80 €645,29
 
GRANIT Oil sump gasket 6-cylinder Fendt, Deutz-Fahr
GRANIT
Oil sump gasket 6-cylinder Fendt, Deutz-Fahr
€6,15 €5,08
 
Bosch/Rexroth Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
5%
Bosch/Rexroth
Hydraulic pump 19 cm³/rpm., taper 1:5, Ø 17 x 17, left Fendt, Deutz-Fahr
Output volume: 19 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure ...
€385,98 €318,99 €366,65 €303,02
 
GRANIT Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
5%
GRANIT
Filter dryer airco Ø 102 mm, 190 mm, F/M #6 O-ring, steel
Length (mm): 190 | Outer Ø (mm): 102 | Connection thread: F/M #6 O-ring | Dimens...
€62,65 €51,78 €59,50 €49,17
 
Brake drum / disc right inner-Ø 180 mm, disc-Ø 276 mm
5%
Brake drum / disc right inner-Ø 180 mm, disc-Ø 276 mm
Menke no.: 68293.
€565,43 €467,30 €537,15 €443,93
 
Connecting rod bush Ø 40 mm Deutz-Fahr
Connecting rod bush Ø 40 mm Deutz-Fahr
Engine types: FL812, FL912. Dimensions: BF4L913, BF6L913.
€10,50 €8,68
 
GRANIT Connecting rod bearing standard, Ø 66 mm Deutz-Fahr
GRANIT
Connecting rod bearing standard, Ø 66 mm Deutz-Fahr
Dimensions: Ø 66 mm mm.
€21,40 €17,69
 
Main bearing standard Ø 75 mm Deutz-Fahr
Main bearing standard Ø 75 mm Deutz-Fahr
Dimensions: Ø 75 mm.
€25,90 €21,41
 
Seal kit steering valve SD60 Deutz-Fahr
Seal kit steering valve SD60 Deutz-Fahr
Description: for control unit 02379662, 04360637, 04331325, 02940278.
€9,70 €8,02
 
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
5%
Windshield frame shock absorber or rear window 230 N, 505 mm, stroke 206 mm
suitable for: Frontscheibe oder Heckscheibe. Newtons: 230. A: 505 mm. B: 255 mm....
€53,28 €44,03 €50,60 €41,82
 
GRANIT Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
5%
GRANIT
Inner ring front left lift arm 75 x 88,6 x 1 mm Deutz-Fahr
Dimensions: 75 x 88.6 x 1 mm.
€47,61 €39,35 €45,20 €37,36
 
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
5%
Protective ring front right lift arm 85 x 70 x 10 mm Deutz-Fahr
Dimensions: 85 x 70 x 10 mm.
€33,27 €27,50 €31,60 €26,12
 
Showing 217 - 232 of 232

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart