Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

232 parts found for Deutz-Fahr AgroStar 6.61
Show:
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
5%
Gear reduction starter 12 V, 4,0 kW, 9 teeth, 245 mm, clockwise
€287,19 €237,35 €272,80 €225,45
 
VICTOR REINZ Crankshaft seal rear Fendt, Deutz-Fahr
5%
VICTOR REINZ
Crankshaft seal rear Fendt, Deutz-Fahr
€41,09 €33,96 €39,00 €32,23
 
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
HELLA
Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with cable
Version: Power rating: 12 V / 2 + 1 + 1 x 21 W / 8 x 21 W, With hazard warning l...
€77,45 €64,01
 
Cobo Contact switch mechanical PTO clutch 540 / 1000 rpm.
10%
Cobo
Contact switch mechanical PTO clutch 540 / 1000 rpm.
Version: For PTO clutch, 540/1000 rpm. To fit: Deutz, Lamborghini, Same.
€38,68 €31,97 €34,95 €28,88
 
GRANIT Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
10%
GRANIT
Angle drive transmission 1:1, 1x M18 x 1,5, 1x M22 x 1,5
Version: VDO 33/83/1, Thread: 1 x M18 x 1.5, 1 x M22 x 1.5.
€164,91 €136,29 €149,20 €123,31
 
GRANIT Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
5%
GRANIT
Ball joint 225 mm, M20 x 1,5, M22 x 1,5, taper 23,5 - 26,5 mm
A: 225 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5...
€78,70 €65,04 €74,75 €61,78
 
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
5%
Force sensor pin 60 kN, 160 mm, Ø 36,8 mm Deutz-Fahr, Lamborghini
Length: 160 mm. Ø: 36,8 mm. Dimensions: Length = 160, Ø = 36.8 mm.
€359,15 €296,82 €341,15 €281,94
 
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
20%
ROCKINGER
Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,...
€1.004,91 €830,50 €807,90 €667,69
 
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
38%
MAHLE
Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€670,19 €553,88 €418,85 €346,16
 
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.075,69 €889,00 €864,85 €714,75
 
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.440,75 €1.190,70 €1.103,20 €911,74
 
MANN-FILTER Fuel filter WK842
MANN-FILTER
Fuel filter WK842
€18,00 €14,88
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
18%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.058,75 €875,00 €873,45 €721,86
 
Walterscheid Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
18%
Walterscheid
Trailer coupling hitch pin 38 mm, 65,7 kN, black Deutz-Fahr
Description: This product is an automatic trailer hitch. The jaw dimensions and ...
€2.101,77 €1.737,00 €1.733,95 €1.433,02
 
Bosch/Rexroth Double pump anticlockwise 22,5 + 16 cm³/rpm. Deutz-Fahr
5%
Bosch/Rexroth
Double pump anticlockwise 22,5 + 16 cm³/rpm. Deutz-Fahr
Output volume: 22,5 + 16 cc/rev. Drive shaft: Splined shaft B 17 x 14 Z9. Direct...
€914,91 €756,12 €869,15 €718,31
 
GRANIT Button Deutz-Fahr AgroPrima 4.31, DX 3.90 SC
5%
GRANIT
Button Deutz-Fahr AgroPrima 4.31, DX 3.90 SC
€73,74 €60,94 €70,00 €57,85
 
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Co...
€27,00 €22,31
 
Repair set brake cylinder DOT4 Deutz-Fahr
5%
Repair set brake cylinder DOT4 Deutz-Fahr
Medium: DOT4. Additional information: Without piston.
€58,58 €48,41 €55,65 €45,99
 
GRANIT Tappet engine FL912, FL913 Fendt, Deutz-Fahr
GRANIT
Tappet engine FL912, FL913 Fendt, Deutz-Fahr
Engine types: FL912, FL913.
€18,40 €15,21
 
Sealing ring push rod tube Fendt, Deutz-Fahr
Sealing ring push rod tube Fendt, Deutz-Fahr
Engine types: FL712, FL812.
€1,65 €1,36
 
Handle right and left Deutz-Fahr Actor 5510, Topliner 4090
5%
Handle right and left Deutz-Fahr Actor 5510, Topliner 4090
€146,05 €120,70 €138,70 €114,63
 
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
20%
ROCKINGER
Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.231,99 €1.018,17 €990,51 €818,60
 
HELLA Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
HELLA
Relays relays make contact 12 V, 40 A, 5-pin, 6,3 mm
Version: 12 V / 40 A, With bracket, 5-pin, blade terminal 6.3 mm.
€19,45 €16,07
 
Showing 1 - 24 of 232

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart