Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

232 parts found for Deutz-Fahr AgroStar 6.61
Show:
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 520 mm. Joystick con... More
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric....
€1.825,85 €1.508,97
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm. More
Dimensions: 240 x 300 mm.
€64,61 €53,40 €61,35 €50,70
You save 5%
Clevis lift arm thread M32 Deutz-Fahr
Dimensions: thread = M32 mm. More
Dimensions: thread = M32 mm.
€367,36 €303,60 €348,95 €288,39
You save 5%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.832,06 €1.514,10 €1.439,45 €1.189,63
You save 21%
GRANIT Starter switch 12 V / 24 V, 7 blade connections - 2 keys
GRANIT
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm), Locking cylinder with water protection, 2 keys (type A 14603), Nu... More
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / ...
€96,46 €79,72 €91,60 €75,70
You save 5%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€37,00 €30,58
GRANIT Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€133,78 €110,56 €121,00 €100,00
You save 10%
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
GRANIT
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening torque: 25 Nm Dimensions: 220 x Ø 57.9 mm More
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tig...
€618,91 €511,50 €587,95 €485,91
You save 5%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€627,55 €518,64
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
You save 21%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
You save 21%
LUK Clutch kit 41 x 45 mm, 21 splines Deutz-Fahr DX 6.50, AgroStar 6.61
LUK
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pressure plate 458231003910, clutch plate 458331011710 More
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pre...
€1.517,76 €1.254,35 €1.373,20 €1.134,88
You save 10%
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint system: Optional | - Super comfort seat with air suspension and 12V compre... More
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Rest...
€2.243,85 €1.854,42
Ball joint 270 mm, taper 24 - 26 mm, M22 x 1,5, M22 x 1,5
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€81,36 €67,24 €77,25 €63,84
You save 5%
GRANIT Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
GRANIT
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€159,90 €132,15 €151,90 €125,54
You save 5%
GRANIT Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
GRANIT
Additional information: Without piston. More
Additional information: Without piston.
€43,06 €35,59 €40,90 €33,80
You save 5%
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
GRANIT
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 54804. More
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke...
€41,77 €34,52 €39,65 €32,77
You save 5%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching function: on/off switch with silver contacts/with splash protection cap/spr... More
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switc...
€6,15 €5,08
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr AgroCompact 3.30 V/F, 3.50 V/F, 3.50 S, 3.70 V/F, 3.90 F, 3.90 S, AgroP... More
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, De...
€6,40 €5,29
Showing 49 - 72 of 232

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart