Menu
EUR

Deutz-Fahr AgroStar 6.61 tractor parts & technical data

Whether you need trailer couplings, lighting or electrics, this page brings together more than 200 parts for the Deutz-Fahr AgroStar 6.61 tractor.

232 parts found for Deutz-Fahr AgroStar 6.61
Show:
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
 
PROBOSS Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
PROBOSS
Seat PROBOSS AS3520 Fendt, Deutz, Deutz-Fahr
To fit: Deutz V2. Suspension: Air suspension. Upholstery type: Fabric. Seat cont...
€1.825,85 €1.508,97
 
Gasket lift housing 240 x 300 mm Deutz-Fahr
5%
Gasket lift housing 240 x 300 mm Deutz-Fahr
Dimensions: 240 x 300 mm.
€64,61 €53,40 €61,35 €50,70
 
Clevis lift arm thread M32 Deutz-Fahr
5%
Clevis lift arm thread M32 Deutz-Fahr
Dimensions: thread = M32 mm.
€367,36 €303,60 €348,95 €288,39
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.832,06 €1.514,10 €1.439,45 €1.189,63
 
GRANIT Starter switch 12 V / 24 V, 7 blade connections - 2 keys
5%
GRANIT
Starter switch 12 V / 24 V, 7 blade connections - 2 keys
Version: Operating voltage: 12 V/24 V, 7 blade terminals (6.3 x 0.8 / 9.5 x 1.2 ...
€96,46 €79,72 €91,60 €75,70
 
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
Version: For mounting above the number plate, or to the left and right of the nu...
€35,80 €29,59
 
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensio...
€37,00 €30,58
 
GRANIT Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
10%
GRANIT
Hydraulic pump 16,8 cm³, anticlockwise rotation, taper 17 mm
€133,78 €110,56 €121,00 €100,00
 
GRANIT Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
5%
GRANIT
Control unit 220 bar, 40 l/min, 220 x Ø 57,9 mm Deutz-Fahr
Max. operating pressure: 220 bar Nominal flow rate: max. 40 l/min. Tightening to...
€618,91 €511,50 €587,95 €485,91
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
21%
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and area...
€2.084,89 €1.723,05 €1.638,10 €1.353,80
 
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
21%
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ...
€2.159,85 €1.785,00 €1.697,00 €1.402,48
 
LUK Clutch kit 41 x 45 mm, 21 splines Deutz-Fahr DX 6.50, AgroStar 6.61
10%
LUK
Clutch kit 41 x 45 mm, 21 splines Deutz-Fahr DX 6.50, AgroStar 6.61
Dimensions (mm): 41 x 45 21 grooves 41 x 45 21 grooves | Contents: Pressure plat...
€1.517,76 €1.254,35 €1.373,20 €1.134,88
 
GRAMMER Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
GRAMMER
Tractor seat Maximo Comfort Plus air suspended, 530 mm, Deutz VI
Joystick console: Yes | Seat width (mm): 530 | Height (mm): 754 | Restraint syst...
€2.243,85 €1.854,42
 
Ball joint 270 mm, taper 24 - 26 mm, M22 x 1,5, M22 x 1,5
5%
Ball joint 270 mm, taper 24 - 26 mm, M22 x 1,5, M22 x 1,5
A: 270 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€81,36 €67,24 €77,25 €63,84
 
GRANIT Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
5%
GRANIT
Ball joint 365 mm, M22 x 1,5, taper 24 - 26 mm
A: 365 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€159,90 €132,15 €151,90 €125,54
 
GRANIT Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
5%
GRANIT
Repair set brake cylinder without piston Valtra-Valmet, Deutz-Fahr
Additional information: Without piston.
€43,06 €35,59 €40,90 €33,80
 
GRANIT Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
5%
GRANIT
Gas strut door-, for- or rear window 220 N, 502 mm Deutz-Fahr
Newtons: 220. A: 502 mm. B: 250 mm. C: 10 mm. D: 10 mm. Form: 6. Menke no.: 5480...
€41,77 €34,52 €39,65 €32,77
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
GRANIT Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
GRANIT
Push button switch starting engine gray, 40 A, 2 blade terminals 6,3 mm
Version: Plastic, grey, 2 blade terminals 6.3 mm, Current: 40 A, Switching funct...
€6,15 €5,08
 
Reflector
Reflector
To fit as: Case IH C 42, 48, 55, 64, 70, CS 48, 52, 58, 63, 68, 75, Deutz-Fahr A...
€6,40 €5,29
 
Showing 49 - 72 of 232

Deutz-Fahr AgroStar 6.61 parts for seals, clutch and cab

Oil weeping from the lift housing, a cab door that no longer stays open, a clutch that starts to slip under heavy draft work. On an AgroStar 6.61 with plenty of hours behind it, these are familiar jobs. This page brings together more than 200 replacement parts that fit this tractor, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and Knott Industrietechnik.

Stopping leaks on engine and linkage

For sealing work there are sealing rings, individual seals, complete seal kits and gaskets. Examples include the lift shaft sealing ring, the lift housing gasket and a thin seal for the hydraulic pump. You will also find crankshaft seals for the Deutz engine, shims for setting end play and bleed valves.

A tip for the crankshaft seal: inspect the running surface on the shaft before fitting anything. If the old seal has worn a groove into it, a new seal sitting in exactly the same spot will soon leak again. Clean the surface, wipe a little engine oil on the lip and press the seal in squarely with a suitable drift rather than tapping the seal itself with a hammer.

Driveline, hitch and cab

The driveline side covers clutch kits and V-belts. A belt that squeals or shows glazed flanks is due for replacement, and where two belts run side by side, change them as a pair so they share the load evenly. At the rear there are drawbars for the linkage.

Around the cab you will find gas struts for the door and windows, door locks, contact switches and tractor seats. If a window has to be bonded back in, there is a repair set with sealant and primer. When two gas struts carry the same window, replace both together, otherwise the tired old strut leaves the new one doing all the work.

Picking the part that fits

When a part comes in more than one version, check the type plate of your AgroStar and note the model and chassis number. If you still have the worn part, look for a stamped or cast reference number on it. That number makes it quick to match the old part against what you see on this page.

Running other tractors from the AgroStar series as well? Each of these models has its own page listing the parts that suit it:

Every other model from the brand is listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart