Menu
EUR

Deutz-Fahr Agrotron 100 tractor parts & technical data

Lighting, trailer couplings and electrics are part of the more than 250 items that fit the Deutz-Fahr Agrotron 100, alongside many other parts on this page.

273 parts found for Deutz-Fahr Agrotron 100
Show:
Gas strut steering column adjustment 400 N, 200 mm, stroke 30 mm
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 mm. C: 10 mm. D: 10 mm. Form: 8. d1: 10 mm. d2: 28 mm. Stroke: 30 mm. To fit: St... More
suitable for: Lenksäulenverstellung. Newtons: 400. A: 200 mm. B: 130 ...
€84,67 €69,98 €77,90 €64,38
You save 8%
Lift rod 630 - 690 mm, ball joint Ø 25,4 mm, M27 x 2 Deutz-Fahr
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, Clevis width = 27, Thread = M27 x 2 mm. More
Dimensions: Length = 630 - 690, Ball joint Ø = 25.4, Clevis Ø = 25, ...
€376,14 €310,86 €346,05 €285,99
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control. More
Version: For hydraulics, electronic control.
€32,89 €27,18 €30,26 €25,01
You save 8%
Lamp glass right, left
Installation location: Right, left. More
Installation location: Right, left.
€40,49 €33,46
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€46,78 €38,66 €43,04 €35,57
You save 8%
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
SANDEN
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 | For compressor: SD7H15 | Reference no.: SD7H15-8091, 04437338, 044114... More
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage...
€691,85 €571,78 €636,50 €526,03
You save 8%
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€699,35 €577,98 €418,87 €346,18
You save 40%
Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€46,98 €38,83 €43,22 €35,72
You save 8%
Universal joint 28,5 x 70,7 mm, bush lubrication
A: 28,5 mm. B: 70,7 mm. Universal joint size: . Lubrication system: Bush lubrication. More
A: 28,5 mm. B: 70,7 mm. Universal joint size: . Lubrication system: Bu...
€177,40 €146,61 €163,21 €134,88
You save 8%
Hand brake cable 1855 mm, M12 x 1,5 Deutz-Fahr Agrotron 4.70-150
Length: 1855 mm. Thread: M12 x 1.5. Dimensions: Length: 1855 mm, Thread M12 x 1.5. More
Length: 1855 mm. Thread: M12 x 1.5. Dimensions: Length: 1855 mm, Threa...
€201,39 €166,44 €185,28 €153,12
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
VICTOR REINZ Valve cover gasket paper engine BF4M1012
€39,65 €32,77 €36,48 €30,15
You save 8%
VICTOR REINZ Valve cover gasket steel engine BF4M1012, BF4M2012
€46,15 €38,14 €42,46 €35,09
You save 8%
Filter set engine oil, fuel, air, safety element Deutz
To fit type: Agrotron 4.70, 4.80, 4.85, 4.90, 4.95, 80, 85, 90, 100, Agrotron MK3 80, 85, 90, 100, Agrotron New 80, 90, 100. Set consisting of: Engine... More
To fit type: Agrotron 4.70, 4.80, 4.85, 4.90, 4.95, 80, 85, 90, 100, A...
€92,58 €76,51 €85,17 €70,39
You save 8%
VICTOR REINZ Cylinder head gasket thickness 1,7 mm, 3 bores
€130,83 €108,12 €120,36 €99,47
You save 8%
Oil cooler Deutz-Fahr Agrotron New 150.7-265, engine BF6M1013
€451,30 €372,98 €415,20 €343,14
You save 8%
Oil cooler Deutz-Fahr Agrotron 80-150
€1.146,21 €947,28 €1.054,51 €871,50
You save 8%
Optibelt V-belt Deutz-Fahr Agrotron 4.70-6.45
€61,87 €51,13 €56,92 €47,04
You save 8%
Pressure control valve Fendt, Deutz-Fahr
€156,01 €128,93 €143,53 €118,62
You save 8%
Piston ring set 3 rings Deutz-Fahr
€49,42 €40,84 €45,47 €37,58
You save 8%
Cylinder head gasket 1,4 mm, 1 bore engine BF4M1012
€55,09 €45,53 €50,68 €41,89
You save 8%
Valve guide inlet and outlet Ø 8 x 15 mm, length 52,8 mm Deutz-Fahr
€20,18 €16,67
Silencer 6 cylinder 970 mm, Ø 70/96 mm Deutz-Fahr Agrotron
Version: 6 cylinders, Length: 970 mm, Inner Ø top: 70 mm, Inner Ø side: 96 mm. More
Version: 6 cylinders, Length: 970 mm, Inner Ø top: 70 mm, Inner Ø si...
€1.099,76 €908,89 €1.011,78 €836,18
You save 8%
Cylinder head bolt 14 x 140 mm Deutz-Fahr Agrotron 6.20-260
Engine types: BF4M1012, BF6L1012, BF6M1013, TCD2013L06 2V. Dimensions: 14 x 140 mm. More
Engine types: BF4M1012, BF6L1012, BF6M1013, TCD2013L06 2V. Dimensions:...
€23,88 €19,73
Outlet valve engine BF4M1012-BF6M1012 Deutz-Fahr
€57,26 €47,32 €52,68 €43,54
You save 8%
Cylinder head gasket 1,5 mm Deutz-Fahr Agrotron 100-260
€63,89 €52,80 €58,78 €48,58
You save 8%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,26 €1,04
Pressure retention valve Deutz-Fahr, Fendt
€35,69 €29,50 €32,83 €27,14
You save 8%
End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/min., Tightening torque: 30 Nm, Connections: M12 x 1.5, Dimensions: 154... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€222,69 €184,04 €204,87 €169,32
You save 8%
Stabilizer cat. 2, 580 - 620 mm, eye-Ø 25,4 mm, heavy-duty version
Eye Ø: 25,4 mm. Description: Schwere Ausführung. Cat.: 2. Technical data: Gabelkopfbreite 51 mm. Length min./max.: 580 - 620 mm. Type: SLA-A-120 HD.... More
Eye Ø: 25,4 mm. Description: Schwere Ausführung. Cat.: 2. Technical ...
€1.169,20 €966,28 €1.075,66 €888,98
You save 8%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6. More
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet...
€68,21 €56,37 €62,75 €51,86
You save 8%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.489,09 €1.230,65 €1.197,32 €989,52
You save 20%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Connection cable mirror heating 2-pin, 2000 mm
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same. More
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same...
€36,30 €30,00
HELLA Toggle switch rijlicht locks in place, 5 blade connections
HELLA
Version: Combination switch, 5 blade terminals, 3 switch positions: 0: off, 1 and 2: on, Designed for location light Rocker operation. More
Version: Combination switch, 5 blade terminals, 3 switch positions: 0:...
€33,38 €27,58
Push button switch lift/lower 48 V link voltage, button green
Version: 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal 3 x 1.5), dustproof a... More
Version: 48 V switching voltage, Green button, make contact, Total but...
€38,96 €32,20 €35,84 €29,62
You save 8%
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 127 x 97 mm. Fixing: Vertical, swiv... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€50,51 €41,74 €48,64 €40,20
You save 4%
ZF Planetary carrier Ø 318 mm, inner-Ø 209 mm ZF front axle 4475006044
€2.026,06 €1.674,43 €1.863,98 €1.540,48
You save 8%
Ball joint, complete left 350 mm, M22 x 1,5, taper 25 - 28 mm
A: 350 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 350 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€372,49 €307,84 €342,69 €283,22
You save 8%
SACHS Torsion damper Deutz Agrotron K 90-120, Agrotron New 80-110
€518,64 €428,63 €477,15 €394,34
You save 8%
Showing 97 - 144 of 273

Deutz-Fahr Agrotron 100 parts for gaskets, belts and the cab

Oil weeping from the valve cover, coolant slowly disappearing or bubbles in the expansion tank: on an Agrotron 100 with a few hours on the clock, trouble often starts at a gasket. This page lists more than 250 new Deutz-Fahr Agrotron 100 parts, with VICTOR REINZ and Elring for the gaskets, alongside GRANIT, HELLA and ROCKINGER.

Head gasket thickness matters

For the engine there are cylinder head gaskets, valve cover gaskets, air receiver gaskets and crankshaft seals, plus seals for the hydraulic pump. Head gaskets come in different thicknesses, and the one you need depends on how far the pistons stand proud of the block. Copy the marking on the old gasket, and measure piston protrusion again if the block or pistons have been machined or replaced. A gasket that is too thin can let the pistons touch the valves.

Belts, starter and lighting

There are V-belts and starter motors for the engine. A belt that squeals on start-up or shows glazed flanks is due for replacement, and a new one should be re-tensioned after the first hours of work. Lighting is covered with work lamps and toggle switches for the driving lights.

If the starter turns slowly, measure battery voltage first and check the earth cable and terminals. A poor connection looks exactly like a worn starter from the outside. When fitting a new valve cover gasket, tighten the bolts evenly and not too hard, or the gasket squeezes out and starts leaking again.

Cab, steering and hitch

Gas struts hold the roof window and rear window open. When a window no longer stays up, replace both struts together so they push evenly. You will also find ball joints, wide-angle mirrors, automatic drawbars and Piton Fix hitches. A worn ball joint shows up as play in the steering wheel and a tractor that wanders on the road.

Getting the right part

The type plate tells you which Agrotron you have, which matters because many Agrotron models look very similar from the outside. With gaskets, compare the shape and bolt holes with the old one, and look for a reference number on the old part.

Other Agrotron models have separate pages with the parts that fit them:

All Deutz-Fahr tractors are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart