Menu
EUR

Deutz-Fahr Agrotron 105 MK3 tractor parts & technical data

Keep your Deutz-Fahr Agrotron 105 MK3 in service with more than 200 parts, among them lighting, trailer couplings and electrics for this Agrotron MK3 tractor.

204 parts found for Deutz-Fahr Agrotron 105 MK3
Show:
GRANIT Filter set engine oil, fuel, air, safety element Deutz
GRANIT
To fit: Deutz. To fit type: Agrotron 6.00, 6.01, 6.05, 6.15, 105, 106, 110, 115, Agrotron MK3 105, 106, 110, 115, Agrotron New 105, 110. Set consistin... More
To fit: Deutz. To fit type: Agrotron 6.00, 6.01, 6.05, 6.15, 105, 106,...
€91,74 €75,82 €87,15 €72,02
You save 5%
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€44,83 €37,05 €42,55 €35,17
You save 5%
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€34,03 €28,12 €32,30 €26,69
You save 5%
GRANIT Axial joint 210 mm, M22 x 1,5, M24 x 1,5, 32 °, Ø 56 mm, Ø 40 mm
GRANIT
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø E: 40 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. F: 32 °. Ø B: 56 mm. Ø...
€45,02 €37,21 €42,75 €35,33
You save 5%
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm. More
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 m...
€23,25 €19,21
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
Connection cable mirror heating 2-pin, 2000 mm
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same. More
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same...
€34,75 €28,72
HELLA Symbol windshield wiper / -nozzle green
HELLA
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Scheibenwischer / - wascher. More
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA ...
€2,88 €2,38
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 127 x 97 mm. Fixing: Vertical, swiv... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€48,60 €40,17
GRANIT Lamp glass right, left
GRANIT
Installation location: Right, left. More
Installation location: Right, left.
€38,80 €32,07
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.663,76 €1.375,01 €1.580,55 €1.306,24
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
GRAMMER Tractor seat Maximo Professional air suspended 530 mm
GRAMMER
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: Mechanical | Seat contact switch: Yes | Upholstery type: Fabric | Armrest: Yes | ... More
Track gauge (mm): 260 | Rückenverlängerung: Yes | Lordosenstütze: M...
€3.562,70 €2.944,38
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
You save 38%
GRANIT Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
GRANIT
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm. More
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,65 €3,02
Piston ring set 3 rings Deutz-Fahr
€47,36 €39,14 €44,95 €37,15
You save 5%
Pressure retention valve Deutz-Fahr, Fendt
€34,21 €28,27 €32,45 €26,82
You save 5%
Showing 25 - 48 of 204

Parts for the Deutz-Fahr Agrotron 105 MK3

An oil weep at the valve cover, a knocking track rod end or a starter that hesitates on a cold morning are familiar on any hard working Agrotron. This page brings together more than 200 parts for the Deutz-Fahr Agrotron 105 MK3 to deal with exactly that, along with lighting, seats and hitch parts.

Engine and hydraulics

For the engine there are valve cover gaskets, gaskets for the front cover and starter motors. On the hydraulic side there are seals, for example for the hydraulic pump.

When you replace a valve cover gasket, preparation is everything. Clean the faces of the head and cover until no oil remains on them, skip any extra sealant on a gasket that is not designed for it, and tighten the bolts evenly in a cross pattern. Overtightening bends the cover and it will leak again.

If the starter turns slowly or only clicks, check the battery voltage first, then the heavy cables to the starter and the earth strap to the engine block. A corroded connection costs more cranking power on a cold morning than you might expect. If all of that is sound and it still only clicks, the starter or its solenoid has worn out and replacement is the fix.

Steering, lights and cab

  • Ball joints, also as complete assemblies
  • Work lamps such as flood beams
  • Rocker switches for the driving lights
  • Gas struts for the roof window
  • Wide-angle mirrors
  • Tractor seats from GRAMMER and PROBOSS among others
  • Drawbars and the Piton Fix

Manufacturers include GRANIT, HELLA, ROCKINGER, GRAMMER and Walterscheid.

Identifying the right part

The Agrotron MK3 series includes several types that look almost identical. Check the type plate first to see that it really says Agrotron 105 MK3. The reference number on the old part then removes any doubt, especially with gaskets and seals. To check a ball joint for play, have one person rock the steering wheel back and forth while the other watches the joint. If the ball moves before the wheel responds, it needs replacing.

Other MK3 models

Each type in the MK3 series has its own page, handy when several Agrotrons share the yard: Deutz-Fahr Agrotron 115 MK3, Deutz-Fahr Agrotron 85 MK3, Deutz-Fahr Agrotron 135 MK3, Deutz-Fahr Agrotron 100 MK3 and Deutz-Fahr Agrotron 150 MK3. The rest of the brand is on Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart