Menu
EUR

Deutz-Fahr Agrotron 115 MK3 tractor parts & technical data

Here you see more than 200 parts that fit the Deutz-Fahr Agrotron 115 MK3, sorted by group, such as trailer couplings, lighting and electrics.

229 parts found for Deutz-Fahr Agrotron 115 MK3
Show:
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
GRANIT
Version: Ø 393/364 mm, 129 teeth. More
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
You save 5%
VICTOR REINZ Exhaust manifold gasket
€6,30 €5,21
Crankshaft seal for Ø 74 x 95 x 11 mm Fendt, Deutz-Fahr
€67,87 €56,09 €64,45 €53,26
You save 5%
Thermag nut exhaust manifold M8, height 8,5 mm Deutz FL712, FL812
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8.5 mm. More
Engine types: FL712, FL812. Thread: M8. Version: Thread M8, Height: 8....
€1,21 €1,00
GRANIT High-pressure pump Fendt, Deutz-Fahr
€523,22 €432,41 €497,00 €410,74
You save 5%
GRAMMER Tractor seat Maximo Professional Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 mm. Joystick con... More
To fit: Deutz VI. Suspension: Air suspension. Upholstery type: Fabric....
€2.531,15 €2.091,86
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741 Fendt, Deutz, Deutz-Fahr
GRAMMER
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick co... More
To fit: Deutz VII. Suspension: Air suspension. Upholstery type: Fabric...
€3.442,00 €2.844,63
GRANIT Handle Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€250,59 €207,10 €238,00 €196,69
You save 5%
GRANIT Mounting bracket force sensor pin Deutz-Fahr, Lamborghini
€82,04 €67,80 €77,90 €64,38
You save 5%
Cylinder Same Iron 100-165.7, Lamborghini R6.100-R6.165.7
€981,47 €811,13 €932,35 €770,54
You save 5%
GRANIT Oil pressure switch engine and transmission M10 x 1, 0,15 - 0,45 bar
GRANIT
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: white. Connection: Blade terminal... More
Version: Thread: M10 x 1 cylindrical, Switching pressure: 0.15 - 0.45 ...
€26,20 €21,65
GRANIT Indicator/position light rectangular red P21W, R5W left
GRANIT
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,00 €297,52
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
AKS-Dasis Condenser 310 x 580 x 22 mm Deutz-Fahr Agrotron
AKS-Dasis
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 | Height (mm): 22 | Weight (g): 3.000 More
Equipment: Soldered cooling fins | Length (mm): 310 | Width (mm): 580 ...
€768,76 €635,34 €730,30 €603,55
You save 5%
HELLA Alternator CA1433IR 14 V / 95 A without belt pulley
HELLA
Charging current (A): 95 | Nominal voltage (V): 14 | Additional information: Without pulley | Nominal values (V / A): 14 / 95 More
Charging current (A): 95 | Nominal voltage (V): 14 | Additional inform...
€507,13 €419,12 €388,30 €320,91
You save 23%
GRANIT Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Lamborghini
GRANIT
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€11,15 €9,21
FEBI Cab filter for C55102 and AF26108
€40,38 €33,37 €11,43 €9,45
You save 72%
GRANIT Ball joint, complete right 400 mm, M22 x 1,5, taper 25 - 28 mm
GRANIT
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper: 25 - 28 mm. More
A: 400 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 25 mm. F: 28 mm. Taper...
€365,83 €302,34 €347,50 €287,19
You save 5%
Showing 97 - 120 of 229

Deutz-Fahr Agrotron 115 MK3 parts, from work lamps to the hydraulic pump

It is in the dark months that you notice how much good lighting and a clear view to the rear are worth. For the Deutz-Fahr Agrotron 115 MK3 this page carries more than 200 new parts, and part of that is for the cab: HELLA work lamps, wide-angle mirrors, gas struts for the roof window and a rocker switch for the driving lights. The engine, hydraulics and hitch are well covered too.

Cab and lighting

A flood beam work lamp lights up the ground beside and behind the tractor. If one goes out, check the plug and the earth connection before you swap the lamp, because moisture in a connector is often the real culprit. The gas strut on the roof window weakens with age. Replace it once the window no longer stays open by itself. For the seat you can choose between air-suspended GRAMMER tractor seats, including the Maximo Dynamic, and PROBOSS seats with seat heating.

Hydraulics, engine and steering

Under the bonnet the parts cover the hydraulic pump, the seal between pump and housing, the front cover gasket and the starter motor. When fitting a hydraulic pump, clean the mating faces thoroughly and make sure no grease is left on them. A thin seal only works on a smooth face with no traces of the old one left. For the front axle there are ball joints. Secure a new ball joint with a new split pin and make sure the dust boot is intact, as dirt inside the joint wears it out in no time.

Drawbar and linkage

At the rear you will find automatic drawbars, top drawbars, Piton Fix units and adapter plates, from makers such as Scharmüller and ROCKINGER. Measure the rail width of the mounting on your tractor before choosing a new drawbar. With adapter plates the hole pattern matters as well, so keep the old plate next to you when comparing.

Type plate and the rest of the MK3 line

The type plate tells you whether it really is an Agrotron 115 MK3. The old part often carries a reference number, which lets you confirm the choice before ordering. Every model in the MK3 line has a page of its own. If another one from this line sits in your shed, the parts are under the Agrotron 85 MK3, Agrotron 100 MK3, Agrotron 105 MK3, Agrotron 135 MK3 and Agrotron 150 MK3. Older and newer Deutz-Fahr models are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart