Menu
EUR

Deutz-Fahr Agrotron 115 MK3 tractor parts & technical data

Here you see more than 200 parts that fit the Deutz-Fahr Agrotron 115 MK3, sorted by group, such as trailer couplings, lighting and electrics.

229 parts found for Deutz-Fahr Agrotron 115 MK3
Show:
MAHLE Starter motor with reduction 12 V, 3,0 kW, 9 teeth, Ø 89 mm, angle l 52
€670,19 €553,88 €418,85 €346,16
You save 38%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
You save 18%
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,2 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.192,59 €985,61 €1.004,51 €830,17
You save 16%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.245,00 €1.028,93
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
SANDEN
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 | For compressor: SD7H15 | Reference no.: SD7H15-8091, 04437338, 044114... More
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage...
€696,16 €575,34 €629,85 €520,54
You save 10%
Ball joint 390 mm, M22 x 1,5, taper 24,6 - 28,5 mm
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 390 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€139,72 €115,47 €132,70 €109,67
You save 5%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.043,02 €862,00 €838,55 €693,02
You save 20%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€1.024,14 €846,40 €905,70 €748,51
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.441,35 €1.191,20 €1.158,80 €957,69
You save 20%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
ROCKINGER
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini, Hürlimann. More
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, L...
€1.387,39 €1.146,60 €1.062,30 €877,93
You save 23%
HELLA Work lamp flood beam H3 55 / 70 W, 12 / 24 V, 112 x 127 x 97 mm
HELLA
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 127 x 97 mm. Fixing: Vertical, swiv... More
Bulb: H3. Connection: AMP plug. Form: Square. Material: Housing: plast...
€48,60 €40,17
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€44,83 €37,05 €42,55 €35,17
You save 5%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
GRANIT Filter set engine oil, fuel, air, safety element Deutz
GRANIT
To fit: Deutz. To fit type: Agrotron 6.00, 6.01, 6.05, 6.15, 105, 106, 110, 115, Agrotron MK3 105, 106, 110, 115, Agrotron New 105, 110. Set consistin... More
To fit: Deutz. To fit type: Agrotron 6.00, 6.01, 6.05, 6.15, 105, 106,...
€91,74 €75,82 €87,15 €72,02
You save 5%
GRANIT Mirror 314 x 228 mm, heated, 12 V, right / left
GRANIT
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 1800 mm. Version: Heated. Operating voltage: 12 V. Installation location... More
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of cur...
€256,40 €211,90 €243,55 €201,28
You save 5%
HELLA Symbol windshield wiper / -nozzle green
HELLA
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Scheibenwischer / - wascher. More
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA ...
€2,88 €2,38
Bosch/Rexroth Hydraulic pump 16 cm³ anticlockwise, spline-as B 17 x 14, 9 splines
Bosch/Rexroth
Min. speed (1/min.): 500 | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Drive shaft: Splined shaft 17 x 14 9 splines | Capacity Q (cc/rev): 16 | F... More
Min. speed (1/min.): 500 | Adaptor plate hole pattern (mm): 60 x 60 (2...
€528,53 €436,80 €502,10 €414,96
You save 5%
PROBOSS Seat air suspended AS4550 550 mm, 12 V, heating Deutz-Fahr, Fendt
PROBOSS
Seat contact switch: Yes | Seat width (mm): 550 | Restraint system: Optional | To fit: Deutz VI | Rotation: Yes | On-board voltage (V): 12 | Joystick ... More
Seat contact switch: Yes | Seat width (mm): 550 | Restraint system: Op...
€2.404,25 €1.986,98
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€34,03 €28,12 €32,30 €26,69
You save 5%
MAHLE Starter motor 12 V, 3,1 kW, 9 teeth, 232 mm, clockwise
€635,10 €524,88 €396,90 €328,02
You save 38%
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
Showing 25 - 48 of 229

Deutz-Fahr Agrotron 115 MK3 parts, from work lamps to the hydraulic pump

It is in the dark months that you notice how much good lighting and a clear view to the rear are worth. For the Deutz-Fahr Agrotron 115 MK3 this page carries more than 200 new parts, and part of that is for the cab: HELLA work lamps, wide-angle mirrors, gas struts for the roof window and a rocker switch for the driving lights. The engine, hydraulics and hitch are well covered too.

Cab and lighting

A flood beam work lamp lights up the ground beside and behind the tractor. If one goes out, check the plug and the earth connection before you swap the lamp, because moisture in a connector is often the real culprit. The gas strut on the roof window weakens with age. Replace it once the window no longer stays open by itself. For the seat you can choose between air-suspended GRAMMER tractor seats, including the Maximo Dynamic, and PROBOSS seats with seat heating.

Hydraulics, engine and steering

Under the bonnet the parts cover the hydraulic pump, the seal between pump and housing, the front cover gasket and the starter motor. When fitting a hydraulic pump, clean the mating faces thoroughly and make sure no grease is left on them. A thin seal only works on a smooth face with no traces of the old one left. For the front axle there are ball joints. Secure a new ball joint with a new split pin and make sure the dust boot is intact, as dirt inside the joint wears it out in no time.

Drawbar and linkage

At the rear you will find automatic drawbars, top drawbars, Piton Fix units and adapter plates, from makers such as Scharmüller and ROCKINGER. Measure the rail width of the mounting on your tractor before choosing a new drawbar. With adapter plates the hole pattern matters as well, so keep the old plate next to you when comparing.

Type plate and the rest of the MK3 line

The type plate tells you whether it really is an Agrotron 115 MK3. The old part often carries a reference number, which lets you confirm the choice before ordering. Every model in the MK3 line has a page of its own. If another one from this line sits in your shed, the parts are under the Agrotron 85 MK3, Agrotron 100 MK3, Agrotron 105 MK3, Agrotron 135 MK3 and Agrotron 150 MK3. Older and newer Deutz-Fahr models are listed under Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart