Menu
EUR

Deutz-Fahr Agrotron 120 tractor parts & technical data

Our range for the Deutz-Fahr Agrotron 120 counts more than 200 parts, including trailer couplings, lighting and electrics for this tractor.

247 parts found for Deutz-Fahr Agrotron 120
Show:
Exhaust gasket exhaust manifold inner Ø 39 mm, hole spacing 64 mm
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm. More
Dimensions: innen Ø 39 mm, Lochabstand 64 mm, Schrauben Ø 10 mm.
€3,80 €3,14
Crankshaft seal rear Ø 130 x 150 x 13 mm FPM FPM
Outer Ø: 150 mm. Width: 13 mm. Inner Ø: 130 mm. Material: FPM (fluoro rubber). More
Outer Ø: 150 mm. Width: 13 mm. Inner Ø: 130 mm. Material: FPM (fluor...
€51,39 €42,47 €47,28 €39,07
You save 8%
Crankshaft seal for Ø 81 x 104 x 11 mm FPM FPM
Outer Ø: 104 mm. Width: 11 mm. Inner Ø: 81 mm. Material: FPM (fluoro rubber). More
Outer Ø: 104 mm. Width: 11 mm. Inner Ø: 81 mm. Material: FPM (fluoro...
€40,83 €33,74 €37,56 €31,04
You save 8%
Volume regulator Fendt, Deutz-Fahr
€176,40 €145,79 €162,29 €134,12
You save 8%
Steering valve 5/4 manual operated 210 bar, 90 l/min, M22 x 1,5 Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 90 l/min., Operating material: hydraulic oil, Tightening torque: 30 Nm, Connectio... More
Technical data: Max. operating pressure: 210 bar, Nominal flow: min. 9...
€913,33 €754,82 €840,26 €694,43
You save 8%
Hydraulic pump 32 cm³/rpm., 13 splines Deutz-Fahr Agrotron 106-150
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Clockwise. Output volume: 32 cc/rev. More
Drive shaft: Splined shaft SAE, Ø 21.8 Z13. Direction of rotation: Cl...
€1.238,69 €1.023,71
Gas strut door- or glass 200 N, 505 mm, stroke 81 mm
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm. B: 365 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 81 mm. To ... More
suitable for: Tür-, Front- oder Heckscheibe. Newtons: 200. A: 505 mm....
€49,37 €40,80 €45,42 €37,54
You save 8%
Gas strut door 750 N, 240 mm, stroke 73 mm
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 73 mm. To fit: Door. More
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 1...
€34,51 €28,52 €31,75 €26,24
You save 8%
Gas strut hood 450 N, 325 mm, stroke 112 mm Deutz-Fahr
suitable for: Motorhaube. Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 19 mm. Stroke: 112 mm. To fit: Bonnet. More
suitable for: Motorhaube. Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm...
€77,21 €63,81 €71,03 €58,71
You save 8%
Replacement key plastic-coated black, lock number 14644
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: Deutz-Fahr</gt></lt>. More
Locking number: 14644. Version: Locking no. 14644 <lt>br<gt> To fit: D...
€18,51 €15,30
Button Deutz-Fahr Series 5600-6095HTS, Agrotron 4.70-260
€45,62 €37,70 €41,97 €34,69
You save 8%
Bush Deutz-Fahr Agrotron
Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2. More
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€28,00 €23,14
Gas strut door 750 N, 240 mm SAME, Deutz-Fahr, Lamborghini
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 1...
€28,30 €23,39
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.405,31 €1.161,41 €1.082,77 €894,85
You save 23%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 445 mm, bore 25 mm
Scharmüller
suitable for: Case IH. Series: Magnum 7100/7200. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: ... More
suitable for: Case IH. Series: Magnum 7100/7200. Category: Pick-up hit...
€1.992,54 €1.646,73 €1.833,14 €1.514,99
You save 8%
Brake light switch mechanical with connection cable and plug
Version: Connection cable with plug. More
Version: Connection cable with plug.
€144,25 €119,21
HELLA Symbol windshield wiper / -nozzle green
HELLA
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Scheibenwischer / - wascher. More
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA ...
€3,00 €2,48
HELLA Rocker switch work lamp, 4 blade connections 6,3 mm
HELLA
Version: On/off switch, 4 blade terminals 6.3 mm, Push button switch with bulb. Description: The 4556EH004570011 switch is designed for location light... More
Version: On/off switch, 4 blade terminals 6.3 mm, Push button switch w...
€22,96 €18,98
Controls linkage for lifting unit control
Version: For lifting unit control. More
Version: For lifting unit control.
€333,49 €275,61
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 mm. Light function: Close-range illumination. Bulb: H3. Material: Hous... More
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x ...
€63,01 €52,07 €60,67 €50,14
You save 4%
Cobo Rear light left / right 120 x 80 x 56 mm, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Cable entry via grommet. Width: 120 mm. Form: Rectangular. Height: 80 mm. Dimensions W x H x D: ... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Cable entry via ...
€35,61 €29,43 €32,76 €27,08
You save 8%
Indicator/position light rectangular red P21W, R5W left
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangular. Installation location: Left. Nominal voltage: 12 V. Type: Bulb. Mounting ty... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Red, white. Form: Rectangu...
€360,10 €297,60
Stabilus Gas strut roof window 150 N, 235 mm, stroke 81 mm Deutz-Fahr
Stabilus
To fit as: Deutz Roof hatch More
To fit as: Deutz Roof hatch
€29,43 €24,32
HELLA Starter motor 12 V, 3,0 kW, 9 teeth, mounting Ø 89 mm, clockwise
€595,84 €492,43 €459,08 €379,41
You save 23%
ZF Inner plate 1,5 mm thick, inner 47,8 mm, outer 72 mm ZF front axle
€41,89 €34,62 €38,54 €31,85
You save 8%
Ball joint, complete left 450 mm, M22 x 1,5, M24 x 1,5
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper: 24 - 28 mm. More
A: 450 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 28 mm. Taper...
€244,62 €202,17 €225,05 €185,99
You save 8%
LUK Pilot bearing 20 x 52 x 15 mm
LUK
Dimensions: 20 x 52 x 15 mm. More
Dimensions: 20 x 52 x 15 mm.
€32,83 €27,13 €30,20 €24,96
You save 8%
Brake disc steel Ø 227 mm, knott version
€51,31 €42,41 €47,21 €39,01
You save 8%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.732,20 €1.431,57
VICTOR REINZ Valve cover gasket SAME, Hürlimann, Deutz-Fahr, Lamborghini
€58,40 €48,26 €53,73 €44,40
You save 8%
VICTOR REINZ Cylinder head gasket thickness 1,5 mm, 1 bore engine BF6M1013EC
€130,83 €108,12 €120,36 €99,47
You save 8%
Water pump with gasket engine
€181,12 €149,69 €166,63 €137,71
You save 8%
MANN-FILTER Filter set engine oil, fuel, air, air inner
MANN-FILTER
To fit: Deutz. To fit type: Agrotron. Set consisting of: Engine oil filter, Main fuel filter, Air filter, Secondary element. More
To fit: Deutz. To fit type: Agrotron. Set consisting of: Engine oil fi...
€148,40 €122,64 €88,87 €73,45
You save 40%
Filler cap for expansion tank, thread 48 mm
Version: Thread: 48 mm, For expansion tank. More
Version: Thread: 48 mm, For expansion tank.
€27,58 €22,79
Hose elbow bypass Ø 16 / 22 mm Same, Deutz-Fahr
Inner Ø: 16 / 22 mm. More
Inner Ø: 16 / 22 mm.
€94,04 €77,72 €86,52 €71,50
You save 8%
O-ring 48 x 5 mm SAME, Deutz-Fahr, Lamborghini
Dimensions: 48 x 5 mm. More
Dimensions: 48 x 5 mm.
€4,46 €3,69
Glow plug red 12 V, M12 x 1,25 Fendt, SAME, Deutz-Fahr
Version: 12 V, Thread M12 x 1.25. More
Version: 12 V, Thread M12 x 1.25.
€58,02 €47,95 €53,38 €44,11
You save 8%
Valve stem seal
€3,61 €2,99
Foot throttle cable A 910 mm, B 800 mm Deutz-Fahr Agrotron
€200,76 €165,92 €184,70 €152,64
You save 8%
Holder for operating cable Deutz-Fahr Agrotron
€47,53 €39,28 €43,73 €36,14
You save 8%
Showing 145 - 192 of 247

Agrotron 120 parts for Deutz-Fahr owners

A blown head gasket, or a roof hatch that will not stay open: both are familiar on the Agrotron 120. This page brings together more than 200 parts for the Deutz-Fahr Agrotron 120, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and VICTOR REINZ.

Engine: head, intake and belts

For the engine there are cylinder head gaskets, air intake gaskets, V-belts and starter motors. With the head gasket, thickness matters. On these engines it is chosen according to how far the pistons stand proud of the block, and the old gasket tells you which one was fitted through the notches or holes along its edge. Count them before you order. If in doubt, measure piston protrusion with a dial gauge, then torque the head in the specified sequence and stages.

A V-belt is best replaced before it snaps. Cracks on the inside, glazed flanks or squealing on a cold start are signs that it is slipping. Tension the new belt correctly and check it again after the first hours of work, because a new belt beds in slightly. When a rocker switch only works if you wiggle it, it is worn inside. Note which wire goes to which terminal before you unplug it.

Cab, hitching and steering

The Agrotron cab has a lot of glass, and the parts reflect that. There are gas struts for the roof hatch, wide-angle mirrors, windscreen symbols, rocker switches for the lights and work lamps, including HELLA flood lamps. Where two gas struts work side by side, replace them as a pair so the hatch is not loaded on one side only.

At the rear you can fit ball-type drawbars, drawbar frames, adapter plates and Piton Fix. For the steering there are complete ball joints for left and right. Check the thread size at both ends of a ball joint, because it differs between versions, and keep the old one next to you when comparing. Connection cables for the trailer socket and work lights are also available.

Type plate, range and neighbouring models

The type plate shows the model and serial number, and most VICTOR REINZ gaskets carry a stamped number you can check against the description. That way your Agrotron 120 gets the right part first time.

The Agrotron range contains many models that look alike from the outside. Each one has its own page listing only the parts that fit it:

Every other tractor from the brand is reached through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart