Menu
EUR

Deutz-Fahr Agrotron 120 tractor parts & technical data

Our range for the Deutz-Fahr Agrotron 120 counts more than 200 parts, including trailer couplings, lighting and electrics for this tractor.

247 parts found for Deutz-Fahr Agrotron 120
Show:
LUK Pilot bearing 20 x 52 x 15 mm
5%
LUK
Pilot bearing 20 x 52 x 15 mm
Dimensions: 20 x 52 x 15 mm.
€34,18 €28,25 €32,45 €26,82
 
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
 
GRANIT Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
5%
GRANIT
Brake disc Ø 241 mm, thickness 4,85 mm, 28 teeth, version Sirmac
€65,62 €54,23 €62,30 €51,49
 
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
5%
External plate AV35 powershift 2,2 mm, inner 77,3 mm, 30 teeth
Version: Thickness: 2.2 mm, Inner: 77.3 mm, Outer: 118.3 mm, 30 teeth.
€34,50 €28,51 €32,75 €27,07
 
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.682,20 €1.390,25
 
GRANIT Oil cooler Deutz-Fahr Agrotron 80-150
5%
GRANIT
Oil cooler Deutz-Fahr Agrotron 80-150
€1.098,43 €907,79 €1.043,50 €862,40
 
Thermostat Ø 42 mm, Deutz-Fahr Agrotron 120-260
5%
Thermostat Ø 42 mm, Deutz-Fahr Agrotron 120-260
Ø: 42 mm.
€75,30 €62,23 €71,50 €59,09
 
GRANIT Air receiver gasket
GRANIT
Air receiver gasket
€12,40 €10,25
 
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
5%
Feed pump 2 hole, hole spacing horizontal 78 mm, pulley Ø 102 mm
Version: 2 holes, Horizontal hole spacing: 78 mm, Centrifugal pump, pulley Ø 102...
€94,04 €77,72 €89,30 €73,80
 
Bolt set 2de steering valve 3x M8 x 180
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit...
€27,90 €23,06
 
GRANIT Stabilizer SAME, Hürlimann, Deutz-Fahr, Lamborghini
5%
GRANIT
Stabilizer SAME, Hürlimann, Deutz-Fahr, Lamborghini
€224,82 €185,80 €213,55 €176,49
 
GRANIT Stabilizer cat. 2, 580 - 620 mm, eye-Ø 25,4 mm, heavy-duty version
5%
GRANIT
Stabilizer cat. 2, 580 - 620 mm, eye-Ø 25,4 mm, heavy-duty version
Eye Ø: 25,4 mm. Description: Schwere Ausführung. Cat.: 2. Technical data: Gabelk...
€1.120,46 €926,00 €1.064,40 €879,67
 
GRANIT Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
10%
GRANIT
Replacement glass 300 x 214 x 3 mm, can be heated, right / left, 12 V
Dimensions: 300 x 214 x 3 mm. Version: Can be heated. Installation location: Rig...
€70,52 €58,28 €63,80 €52,73
 
Bush Deutz-Fahr Agrotron
Bush Deutz-Fahr Agrotron
€29,45 €24,34
 
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
10%
Gas strut hood 450 N, 325 mm Deutz-Fahr Agrotron 4.70-150
Newtons: 450. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. To fit: bonnet. Form: 6.
€68,63 €56,72 €62,00 €51,24
 
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
23%
ROCKINGER
Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
Colour: Black. Description: Entire coupling body and bearing forged, Easy height...
€1.133,29 €936,60 €867,75 €717,15
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Scharmüller Drawbar frame K80 330/25/32, 3500/4000 kg, black
12%
Scharmüller
Drawbar frame K80 330/25/32, 3500/4000 kg, black
To fit as: Case IH Serie CS, CVX; Deutz-Fahr Serie Agrotron 4.70-6.45 (MK1), Agr...
€2.505,76 €2.070,88 €2.216,00 €1.831,41
 
HELLA Rocker switch work lamp, 4 blade connections 6,3 mm
HELLA
Rocker switch work lamp, 4 blade connections 6,3 mm
Version: On/off switch, 4 blade terminals 6.3 mm, Push button switch with bulb. ...
€22,00 €18,18
 
Knob green for hydraulics, electronic control
Knob green for hydraulics, electronic control
Version: For hydraulics, electronic control.
€39,40 €32,56
 
FTE Clutch master cylinder mineral oil, gray cast iron, with piston rod
5%
FTE
Clutch master cylinder mineral oil, gray cast iron, with piston rod
Medium: Mineral oil | Additional information: With piston rod | Material: Grey c...
€318,06 €262,86 €302,15 €249,71
 
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Push button switch PTO shaft 48 V, button yellow, Ø 30 mm Agrotron
Version: 48 V switching voltage Yellow button, make contact Total button travel:...
€38,00 €31,41
 
Showing 121 - 144 of 247

Agrotron 120 parts for Deutz-Fahr owners

A blown head gasket, or a roof hatch that will not stay open: both are familiar on the Agrotron 120. This page brings together more than 200 parts for the Deutz-Fahr Agrotron 120, from makers such as GRANIT, HELLA, Walterscheid, ROCKINGER and VICTOR REINZ.

Engine: head, intake and belts

For the engine there are cylinder head gaskets, air intake gaskets, V-belts and starter motors. With the head gasket, thickness matters. On these engines it is chosen according to how far the pistons stand proud of the block, and the old gasket tells you which one was fitted through the notches or holes along its edge. Count them before you order. If in doubt, measure piston protrusion with a dial gauge, then torque the head in the specified sequence and stages.

A V-belt is best replaced before it snaps. Cracks on the inside, glazed flanks or squealing on a cold start are signs that it is slipping. Tension the new belt correctly and check it again after the first hours of work, because a new belt beds in slightly. When a rocker switch only works if you wiggle it, it is worn inside. Note which wire goes to which terminal before you unplug it.

Cab, hitching and steering

The Agrotron cab has a lot of glass, and the parts reflect that. There are gas struts for the roof hatch, wide-angle mirrors, windscreen symbols, rocker switches for the lights and work lamps, including HELLA flood lamps. Where two gas struts work side by side, replace them as a pair so the hatch is not loaded on one side only.

At the rear you can fit ball-type drawbars, drawbar frames, adapter plates and Piton Fix. For the steering there are complete ball joints for left and right. Check the thread size at both ends of a ball joint, because it differs between versions, and keep the old one next to you when comparing. Connection cables for the trailer socket and work lights are also available.

Type plate, range and neighbouring models

The type plate shows the model and serial number, and most VICTOR REINZ gaskets carry a stamped number you can check against the description. That way your Agrotron 120 gets the right part first time.

The Agrotron range contains many models that look alike from the outside. Each one has its own page listing only the parts that fit it:

Every other tractor from the brand is reached through Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart