Menu
EUR

Deutz-Fahr Agrotron 135 MK3 tractor parts & technical data

On this page you get more than 200 parts for the Deutz-Fahr Agrotron 135 MK3. Trailer couplings, lighting and electrics are easy to find without a long search.

233 parts found for Deutz-Fahr Agrotron 135 MK3
Show:
ROCKINGER Trailer coupling without manual plug rail 330 mm, 2000 kg
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€905,38 €748,25 €727,90 €601,57
You save 20%
PROBOSS Tractor seat AS3520 air suspended fabric 12 V, seat width 520 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Height adjustment. Longitudinal adjustment. Backrest tilt adjustment. Lumbar support. Adjustabl... More
Air suspension with 12V compressor. Fore/aft isolator. Height adjustme...
€1.245,00 €1.028,93
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 148 mm, 2 grooves
SANDEN
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage (V): 12 | For compressor: SD7H15 | Reference no.: SD7H15-8091, 04437338, 044114... More
Refrigerant: R 134a | No. of grooves: 2 | Fixing: EM | Nominal voltage...
€696,16 €575,34 €629,85 €520,54
You save 10%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.043,02 €862,00 €838,55 €693,02
You save 20%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€1.024,14 €846,40 €905,70 €748,51
You save 12%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.441,35 €1.191,20 €1.158,80 €957,69
You save 20%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
ROCKINGER
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini, Hürlimann. More
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, L...
€1.387,39 €1.146,60 €1.062,30 €877,93
You save 23%
SACHS Damper cab suspension S26X100, 235 mm, eye Ø 12 mm, rear
SACHS
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation location: hinten beidseitig | Length (mm): 235 | Shock absorber mounting type: T... More
Design: Oil pressure | To fit: CNH, SDF, STEYR, VALMET | Installation ...
€166,42 €137,54 €158,00 €130,58
You save 5%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6 - 28,5 mm. More
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. T...
€179,85 €148,64 €170,85 €141,20
You save 5%
VICTOR REINZ Cylinder head gasket thickness 1,5 mm, 1 bore engine BF6M1013EC
€125,38 €103,62 €119,10 €98,43
You save 5%
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,2 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.192,59 €985,61 €1.004,51 €830,17
You save 16%
Mekra Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Mekra
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€44,83 €37,05 €42,55 €35,17
You save 5%
Bosch/Rexroth Hydraulic pump 16 cm³ anticlockwise, spline-as B 17 x 14, 9 splines
Bosch/Rexroth
Min. speed (1/min.): 500 | Adaptor plate hole pattern (mm): 60 x 60 (2 x) | Drive shaft: Splined shaft 17 x 14 9 splines | Capacity Q (cc/rev): 16 | F... More
Min. speed (1/min.): 500 | Adaptor plate hole pattern (mm): 60 x 60 (2...
€528,53 €436,80 €502,10 €414,96
You save 5%
PROBOSS Seat air suspended AS4550 550 mm, 12 V, heating Deutz-Fahr, Fendt
PROBOSS
Seat contact switch: Yes | Seat width (mm): 550 | Restraint system: Optional | To fit: Deutz VI | Rotation: Yes | On-board voltage (V): 12 | Joystick ... More
Seat contact switch: Yes | Seat width (mm): 550 | Restraint system: Op...
€2.404,25 €1.986,98
LUK Pilot bearing 20 x 52 x 15 mm Deutz-Fahr, Fendt, Lamborghini, Steyr
LUK
Dimensions (mm): 20 x 52 x 15 More
Dimensions (mm): 20 x 52 x 15
€34,03 €28,12 €32,30 €26,69
You save 5%
GRANIT Oil seal drive shaft SAME, Hürlimann, Deutz-Fahr, Lamborghini
€127,41 €105,30 €121,00 €100,00
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
GRANIT Stud bolt exhaust M8 / M10, 72 mm Deutz-Fahr
GRANIT
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 mm. More
Version: Thread M8, M10, Length: 72 mm. Thread: M8 / M10. Length: 72 m...
€23,25 €19,21
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
Connection cable mirror heating 2-pin, 2000 mm
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same. More
Dimensions: Length = 2000 mm. To fit: Case IH, Deutz, Fendt, JCB, Same...
€34,75 €28,72
HELLA Symbol windshield wiper / -nozzle green
HELLA
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Scheibenwischer / - wascher. More
Version: Green, windscreen wiper/washer. Colour: grün. To fit: HELLA ...
€2,88 €2,38
Showing 25 - 48 of 233

Deutz-Fahr Agrotron 135 MK3 parts for the seat, hitch and engine

Start with the type plate. If it reads Agrotron 135 MK3, the more than 200 replacement parts on this page are matched to your tractor, from GRANIT and from brands such as HELLA, GRAMMER, Scharmüller and ROCKINGER. If you still have the old part, look for a stamped or printed reference number on it, as that is usually the quickest route to the right replacement.

Cab and operator comfort

Seats tend to wear out long before the rest of the tractor. You will find air suspended tractor seats such as the Maximo Dynamic, plus a PROBOSS seat with a seat heater. Alongside them are gas struts for the door, front window and rear window, wide-angle mirrors, rocker switches for the driving lights and flood beam work lamps for long evenings in the field. When swapping a seat, check how the old one is bolted to the seat console before choosing its replacement.

A tip on gas struts: fit them with the piston rod pointing down so the seal stays in its oil film, and replace the struts on a door or window as a pair. A single new strut next to a tired one ends up carrying the full load and wears out early.

Hitch, hydraulics and engine

At the rear there are drawbars and top drawbars on rails, Piton Fix hitches and adapter plates. Before ordering, check the rail width and pin diameter of the hitch currently fitted, because those decide whether a new one slides into the existing guide. Steering is covered by ball joints and the linkage by hydraulic pumps. For the engine there are starter motors, intake manifold gaskets and cylinder head gaskets made for the Agrotron.

Starter motors deserve a quick comparison before ordering too. The mounting flange, the number of teeth on the pinion and the position of the terminals should all match the unit coming off. Clean the earth strap and battery terminals while you are at it, because a poor connection makes even a new starter turn slowly.

Other Agrotron MK3 models

Each model in the Agrotron MK3 range has a page of its own, so if you run more than one, check every machine separately: Deutz-Fahr Agrotron 85 MK3, Deutz-Fahr Agrotron 100 MK3, Deutz-Fahr Agrotron 105 MK3, Deutz-Fahr Agrotron 115 MK3 and Deutz-Fahr Agrotron 150 MK3. That way a part ordered for one tractor does not end up on the bench next to the wrong one. For the rest of the brand, from older tractors to newer series, go to all Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart