Menu
EUR

Deutz-Fahr Agrotron 150 tractor parts & technical data

Servicing a Deutz-Fahr Agrotron 150 starts with the right part. This page lists more than 200 of them, among them trailer couplings, lighting and electrics.

241 parts found for Deutz-Fahr Agrotron 150
Show:
VICTOR REINZ Valve stem seal set Ø 9 x 1,5 mm
VICTOR REINZ
Valve stem seal set Ø 9 x 1,5 mm
€37,35 €30,87
 
Radiator filler cap reservoir Ø 56 mm, height 21 mm
5%
Radiator filler cap reservoir Ø 56 mm, height 21 mm
Version: for expansion tank. Neck Ø: 56 mm. Height: 21 mm.
€105,05 €86,82 €99,75 €82,44
 
Optibelt V-belt Deutz-Fahr Agrotron 4.70-6.45
5%
Optibelt
V-belt Deutz-Fahr Agrotron 4.70-6.45
€59,29 €49,00 €56,30 €46,53
 
GRANIT Valve stem seal
GRANIT
Valve stem seal
€3,46 €2,86
 
GRANIT Silencer 6 cylinder 970 mm, Ø 70/96 mm Deutz-Fahr Agrotron
5%
GRANIT
Silencer 6 cylinder 970 mm, Ø 70/96 mm Deutz-Fahr Agrotron
Version: 6 cylinders, Length: 970 mm, Inner Ø top: 70 mm, Inner Ø side: 96 mm.
€1.053,91 €871,00 €1.001,20 €827,44
 
GRANIT Turbocharger mounting kit Fendt, Deutz-Fahr
5%
GRANIT
Turbocharger mounting kit Fendt, Deutz-Fahr
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket...
€125,17 €103,45 €118,90 €98,26
 
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€17,60 €14,55
 
GRANIT End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
5%
GRANIT
End plate steering valve 210 bar, 80 l/min, 154 x 25 x 137 mm Deutz
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 80 l/m...
€213,41 €176,37 €202,70 €167,52
 
Gas strut door 750 N, 240 mm, stroke 73 mm
5%
Gas strut door 750 N, 240 mm, stroke 73 mm
suitable for: Tür. Newtons: 750. A: 240 mm. B: 120 mm. C: 10 mm. D: 10 mm. Form:...
€33,07 €27,33 €31,40 €25,95
 
GRANIT Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
GRANIT
Gas strut roof window 150 N, 235 mm SAME, Hürlimann, Lamborghini
Newtons: 150. A: 235 mm. B: 110 mm. C: 8 mm. D: 8 mm. Form: 2.
€26,80 €22,15
 
GRANIT Mirror 314 x 228 mm, heated, 12 V, right / left
5%
GRANIT
Mirror 314 x 228 mm, heated, 12 V, right / left
Dimensions: 314 x 228 mm. Height: 314 mm. Width: 228 mm. Radius of curvature: 18...
€256,40 €211,90 €243,55 €201,28
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
HELLA Symbol work lamp green
HELLA
Symbol work lamp green
Version: Green, work light. Colour: grün. To fit: HELLA Schalter Serien 4570 und...
€2,88 €2,38
 
HELLA Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
HELLA
Work lamp flood beam H3, 182 x 102 x 103 mm, 12 V, built-in
Nominal voltage: 12 V. Form: Rectangular. Dimensions W x H x D: 182 x 102 x 103 ...
€60,65 €50,12
 
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
10%
GRANIT
Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Lig...
€51,14 €42,26 €46,25 €38,22
 
HELLA Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
HELLA
Work lamp flood beam H3, 65 W, 12/24 V, 112 x 127 x 97 mm
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 112 x 127 x 97 m...
€57,00 €47,11
 
HELLA Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
HELLA
Beacon H1 KL Rotaflex 12 V, 55 W, Ø 135 mm, 222 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€139,80 €115,54
 
HELLA Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
HELLA
Reflector rectangular red, 70 x 31,5 mm, thickness 5 mm, bonded
Colour: Red. Width: 70 mm. Form: Rectangular. Height: 31.5 mm. Material: Plastic...
€2,86 €2,36
 
Relays N/O-contact 12 V, 40 A, 4-pin, blade connection
Relays N/O-contact 12 V, 40 A, 4-pin, blade connection
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal.
€9,35 €7,73
 
Elring Gasket set complete with oil sump gasket engine BF6M1013
5%
Elring
Gasket set complete with oil sump gasket engine BF6M1013
Supplementary set: with oil sump gasket | Additional information: with crankshaf...
€637,97 €527,25 €606,00 €500,83
 
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
5%
Ball joint 330 mm, C M22 x 1,5, D M24 x 1,5, taper 24,6 - 28,5 mm
A: 330 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. E: 24,6 mm. F: 28,5 mm. Taper: 24,6...
€179,85 €148,64 €170,85 €141,20
 
GRANIT Starter ring gear Ø 393/364 mm, 129 teeth Deutz
5%
GRANIT
Starter ring gear Ø 393/364 mm, 129 teeth Deutz
Version: Ø 393/364 mm, 129 teeth.
€79,53 €65,73 €75,55 €62,44
 
GRANIT Connection cable 2,5 m
5%
GRANIT
Connection cable 2,5 m
Length: 2.5 m. Reference no.: 1762625.
€79,73 €65,89 €75,70 €62,56
 
Showing 73 - 96 of 241

Deutz-Fahr Agrotron 150 parts

When the engine will not turn over

A slow or silent start on a Deutz-Fahr Agrotron 150 is not always the starter motor. Before you fit a new one, check the battery charge, then the battery terminals and the earth strap between engine and frame. A corroded earth can stop a healthy starter dead. If the starter clicks but does not turn with a good battery, the solenoid or the motor itself is the next suspect. This page has starter motors for the Agrotron 150 among more than 200 parts for this tractor.

Engine, cab and electrics

  • Cylinder head gaskets, including VICTOR REINZ, and air receiver gaskets
  • V-belts
  • Gas struts, for example for the roof window
  • Work lamps and wide-angle mirrors, with HELLA among the brands
  • Rocker switches and connection cables
  • Complete ball joints for the steering

Hitching up

At the rear there are ball drawbars, drawbar frames, Piton Fix rails and adapter plates. Walterscheid and ROCKINGER are among the makers next to GRANIT. When replacing a hitch component, measure the rail width and hole pattern of the parts already on the tractor.

Matching the part to your tractor

Check the type plate to confirm you have an Agrotron 150 and note the serial number. For gaskets, belts and switches, compare the reference number on the old part with the number listed for each item. With gas struts, note where the old one sat, as the roof window and the door each take their own version.

Head gasket work

Coolant that disappears, white smoke or oil in the coolant all point towards the cylinder head gasket. A new gasket only seals on clean, flat faces, so clean the head and block without scoring them and check the head with a straight edge and feeler gauge. Have a warped head skimmed before refitting it. Use new head bolts where the manual calls for them and tighten them in the right order and in stages. Note the thickness marked on the old gasket so the new one matches.

Other Agrotron models

Running more than one Agrotron on the farm? These pages list what fits the Deutz-Fahr Agrotron 85, Deutz-Fahr Agrotron 100, Deutz-Fahr Agrotron 106, Deutz-Fahr Agrotron 115, Deutz-Fahr Agrotron 120 and Deutz-Fahr Agrotron 135. You may also come across the Agrotron 90 and 105, two smaller tractors from this family. Working on a different Deutz-Fahr tractor? Head over to Deutz-Fahr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart